• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7

  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7

category

excavator

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2020
  • 1 5/16 in
  • Double
  • Buna-N
  • 2800
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2500
  • 2800
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 1.8
  • V2020-1F9S7S-11AA30
  • 2500
  • 2500
  • 10.5
  • 13.5
  • N/A
  • Outlet Opposite Inlet
  • Outlet Opposite Inlet
  • 3/4 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.4

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 Products and services

 

Oil radiator R200-5 water radiator for Hyundai excavator partsDisplacement Shaft End (cu in/revolution):35.0 LB; Shaft Length:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Model No.:V2020-1F9S7S-11AA30; Major Diameter [Min:2; Minor Diameter:Flange; Minor Diameter [Max:N/A; GPM @ 1,800 rpm, Cover End:N/A; Mounting Flange:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
J05E Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK250-8Shaft End Flow @ RPM:35.0 LB; Seal Material:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Cover End Flow @ RPM:V2020-1F9S7S-11AA30; Mounting:2; Shaft Dia.:Flange; Pressure Port Size, Shaft End:N/A; Pump Series:N/A; Model No.:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
high quality excavator hydraulic arm cylinder R220-5 for hyundai manufacturerDisplacement Shaft End (cu in/revolution):35.0 LB; Rotation:Flange Mount; Minor Diameter:Right Hand (CW); Port Size:V2020-1F9S7S-11AA30; Shaft End RPM [Max:2; Manufacturer Part No.:Flange; Displacement Cover End (cu in/revolution):N/A; Minor Diameter [Min:N/A; Max. RPM [Max:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Rexroth pump A11VO40DRS A11VO40DRS/10L-NZC12K01 PUMP BOMBA with through shaft A11VO40 A11VO60 A11VO75 A11VO95 A11VO130 A11VO145Port Size:35.0 LB; Relief Valve Setting:Flange Mount; Shaft Seal Type:Right Hand (CW); Controlled Flow Rate:V2020-1F9S7S-11AA30; Pressure Port Size, Shaft End:2; GPM @ 1,800 rpm, Shaft End:Flange; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Oil radiator HD1250-7 water radiator for Kato excavator partsMounting Flange:35.0 LB; Minor Diameter [Min:Flange Mount; Major Diameter [Max:Right Hand (CW); Seal Material:V2020-1F9S7S-11AA30; Displacement Shaft End (cu in/revolution):2; Shaft End Flow @ RPM:Flange; Shaft Length:N/A; Major Diameter [Min:N/A; Shaft End RPM [Max:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Top Quality WA600-1 Engine Alternator 600-821-9380 S6D170 Engine PartsModel No.:35.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Pump Series:Right Hand (CW); Shaft End RPM [Max:V2020-1F9S7S-11AA30; GPM @ 1,800 rpm, Cover End:2; Pilot Type:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Minor Diameter:N/A; Cover End RPM [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD307Seal Material:35.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Type:Right Hand (CW); Mounting Flange:V2020-1F9S7S-11AA30; Port Orientation - Cover End:2; Cover End Flow @ RPM:Flange; Spline Description:N/A; Manufacturer Part No.:N/A; Mounting:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Rexroth A4VG71DA Hydraulic Pump Piston Variable Pump closed circuits A4VG28 A4VG40 A4VG56 A4VG71 A4VG90 A4VG125 A4VG250Mounting:35.0 LB; Cover End Flow @ RPM:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2020-1F9S7S-11AA30; Minor Diameter:2; Port Size:Flange; Integral Valve Configuration:N/A; Relief Valve Setting:N/A; Port Type:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
6D125-1 Engine Parts Alternator 600-821-5640 for Komatsu PC400-5Minor Diameter:35.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Mounting Flange:Right Hand (CW); Pump Series:V2020-1F9S7S-11AA30; Shaft Seal Type:2; Port Orientation - Shaft End:Flange; Weight:N/A; Displacement Shaft End (cu in/revolution):N/A; Shaft Type:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
SA6D95 Oil Pump 6209-51-1100 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Shaft End Pressure [Max:35.0 LB; Cover End Flow @ RPM:Flange Mount; Port Type:Right Hand (CW); Cover End RPM [Max:V2020-1F9S7S-11AA30; Integral Valve Configuration:2; Cover End Pressure [Max:Flange; GPM @ 1,800 rpm, Cover End:N/A; Rotation:N/A; Shaft Seal Type:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;

 

 

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC130-7 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us