• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts

  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts

category

excavator

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts Technical information

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Double
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A12-11BC20-LH
  • 2300
  • 3000
  • 18
  • 31.5
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.4

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts Products and services

 

Top Quality WA400 Engine Alternator 600-821-9390 S6D110 Engine PartsSeal Material:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Size:Left Hand (CCW); Shaft End Flow @ RPM:2520VQ21A12-11BC20-LH; Model No.:2.5; Port Orientation - Cover End:Flange; Shaft Dia.:N/A; Max. RPM [Max:Standard Pilot; Controlled Flow Rate:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
Hydraulic Pilot Gear Pump for Nachi charge pump PVD-1B-32BP PVD-2B-40P PVD-2B-50 ZX30 ZX40 ZX50Cover End RPM [Max:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Shaft Seal Type:2520VQ21A12-11BC20-LH; Port Type:2.5; Pump Series:Flange; Rotation:N/A; Port Size:Standard Pilot; Mounting Flange:0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
high quality hydraulic piston cylinder PC120-6 manufacturerShaft Length:45.0 LB; Spline Description:Flange Mount; Model No.:Left Hand (CCW); Integral Valve Configuration:2520VQ21A12-11BC20-LH; Shaft Dia.:2.5; Minor Diameter:Flange; Pressure Port Size, Cover End:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
For Komatsu Excavator PC200-8 Engine Cylinder Block Assembly 6754-21-1310 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Max. RPM [Max:45.0 LB; Shaft Length:Flange Mount; Shaft Seal Type:Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2.5; Shaft Key:Flange; Integral Valve Configuration:N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End Flow @ RPM:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
high quality excavator hydraulic cylinder R225-7 for hyundai manufacturerGPM @ 1,800 rpm, Cover End:45.0 LB; Cover End Flow @ RPM:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Mounting Flange:2520VQ21A12-11BC20-LH; Spline Description:2.5; Shaft Length:Flange; Pressure Port Size, Shaft End:N/A; Relief Valve Setting:Standard Pilot; Port Type:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
6D114 Engine Flywheel Assembly 6741-31-4100 for Komatsu Excavator PC300-7 PC360-7Shaft Dia.:45.0 LB; Mounting Flange:Flange Mount; Weight:Left Hand (CCW); Minor Diameter [Min:2520VQ21A12-11BC20-LH; Spline Description:2.5; Displacement Shaft End (cu in/revolution):Flange; Cover End Flow @ RPM:N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End RPM [Max:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
high quality excavator carrier upper roller EX60-1 for Hitachi excavator undercarriage partsMajor Diameter [Min:45.0 LB; Shaft Key:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Seal Material:2520VQ21A12-11BC20-LH; GPM @ 1,800 rpm, Cover End:2.5; Manufacturer Part No.:Flange; Port Type:N/A; Mounting Flange:Standard Pilot; Cover End Pressure [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6Major Diameter [Max:45.0 LB; Port Size:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Shaft End Flow @ RPM:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2.5; Displacement Shaft End (cu in/revolution):Flange; Mounting:N/A; Mounting Flange:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
6SD1-T Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX300-2/3Pressure Port Size, Shaft End:45.0 LB; Minor Diameter [Min:Flange Mount; Rotation:Left Hand (CCW); Port Orientation - Cover End:2520VQ21A12-11BC20-LH; Mounting:2.5; Controlled Flow Rate:Flange; Spline Description:N/A; Pressure Port Size, Cover End:Standard Pilot; Cover End Flow @ RPM:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;
Oil radiator FR85-7 water radiator for Foton Lovolexcavator partsDisplacement Cover End (cu in/revolution):45.0 LB; Minor Diameter:Flange Mount; Relief Valve Setting:Left Hand (CCW); Integral Valve Configuration:2520VQ21A12-11BC20-LH; Port Size:2.5; Minor Diameter [Max:Flange; Controlled Flow Rate:N/A; Mounting Flange:Standard Pilot; Major Diameter [Min:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A12-11BC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.4; Displacement Shaft End (cu in/revolution):4.1;

 

 

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed high quality excavator carrier roller DH215-7 for Daewoo excavator undercarriage parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us