• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)

  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)
  • Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120)

category

excavator

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2020
  • 1.3125 in
  • Buna-N
  • 2800
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2800
  • 2800
  • N/A
  • 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm
  • V2020-1F9S9S-11DD30-LH
  • 2500
  • 2500
  • 13.5
  • 13.5
  • N/A
  • Outlet 90° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.81
  • 1.81

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) Products and services

 

6D125 Oil Pump 6251-51-1001 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Mounting:35.0 LB; Shaft Key:Flange Mount; Shaft Dia.:Left Hand (CCW); Port Orientation - Cover End:V2020-1F9S9S-11DD30-LH; Cover End Flow @ RPM:2; Shaft Type:Flange; Spline Description:N/A; Manufacturer Part No.:N/A; Shaft Length:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
H07C-T Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX220-3Displacement Shaft End (cu in/revolution):35.0 LB; Shaft End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Mounting Flange:V2020-1F9S9S-11DD30-LH; Weight:2; Port Orientation - Shaft End:Flange; Cover End RPM [Max:N/A; Rotation:N/A; Cover End Pressure [Max:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
Hydraulic Main Pump For Hitachi Excavator EX240-3 and Spare PartsShaft Key:35.0 LB; Shaft End RPM [Max:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Dia.:V2020-1F9S9S-11DD30-LH; Weight:2; Pressure Port Size, Shaft End:Flange; Shaft End Pressure [Max:N/A; Pump Series:N/A; Integral Valve Configuration:0.875 in; Mounting:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
Oil radiator HD1880-5 water radiator for Kato excavator partsMounting:35.0 LB; Port Size:Flange Mount; Shaft Length:Left Hand (CCW); Pump Series:V2020-1F9S9S-11DD30-LH; Integral Valve Configuration:2; GPM @ 1,800 rpm, Cover End:Flange; Pilot Type:N/A; Minor Diameter [Min:N/A; Shaft Type:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
Hydraulic Main Pump For Hitachi Excavator EX100 and Spare PartsCover End Pressure [Max:35.0 LB; Cover End Flow @ RPM:Flange Mount; Shaft Seal Type:Left Hand (CCW); Port Type:V2020-1F9S9S-11DD30-LH; Seal Material:2; Displacement Cover End (cu in/revolution):Flange; Shaft Type:N/A; Relief Valve Setting:N/A; Minor Diameter [Max:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
high quality carrier roller EX120-3 for Hitachi excavator undercarriage partsRelief Valve Setting:35.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft Length:V2020-1F9S9S-11DD30-LH; Shaft Key:2; Displacement Cover End (cu in/revolution):Flange; Major Diameter [Max:N/A; Weight:N/A; Major Diameter [Min:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
high quality excavator top carrier roller EX300-1 for Hitachi excavator undercarriage partsRotation:35.0 LB; Cover End Flow @ RPM:Flange Mount; Port Type:Left Hand (CCW); Cover End RPM [Max:V2020-1F9S9S-11DD30-LH; Integral Valve Configuration:2; Weight:Flange; Minor Diameter [Min:N/A; Shaft Key:N/A; Port Size:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
parker pump PV063 piston pump for parkerMinor Diameter:35.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Minor Diameter [Max:V2020-1F9S9S-11DD30-LH; Manufacturer Part No.:2; Spline Description:Flange; Mounting Flange:N/A; Port Orientation - Cover End:N/A; Shaft Length:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
high quality excavator hydraulic arm cylinder DH215-7 for Daewoo manufacturerMajor Diameter [Min:35.0 LB; Port Type:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Rotation:V2020-1F9S9S-11DD30-LH; Minor Diameter [Max:2; Spline Description:Flange; Relief Valve Setting:N/A; Max. RPM [Max:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;
For Komatsu Excavator PC300-7 Engine Starting Motor 600-863-5711 6D114 Engine Parts PC360-7Shaft Dia.:35.0 LB; Minor Diameter [Max:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Max. RPM [Max:V2020-1F9S9S-11DD30-LH; Spline Description:2; Cover End Pressure [Max:Flange; Port Size:N/A; Pressure Port Size, Shaft End:N/A; Cover End Flow @ RPM:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S9S-11DD30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:13.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.81; Displacement Shaft End (cu in/revolution):1.81;

 

 

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hitachi ZX120(ZAX120) Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us