• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts

  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts
  • high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts

category

excavator

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1.9375 in
  • Buna-N
  • 2400
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2400
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm
  • 3525VQ38A12-11CC20-LH
  • 3000
  • 3000
  • 18
  • 57
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 2.45
  • 7.42

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts Products and services

 

high quality excavator upper roller EC360 for Volvo excavator undercarriage partsPort Size:76.0 LB; Cover End Flow @ RPM:Flange Mount; Model No.:Left Hand (CCW); Shaft Dia.:3525VQ38A12-11CC20-LH; Port Orientation - Shaft End:3; Displacement Cover End (cu in/revolution):Flange; Weight:N/A; Mounting Flange:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Mounting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
Oil radiator SY215C-8 water radiator for SANY excavator partsManufacturer Part No.:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Model No.:Left Hand (CCW); Port Type:3525VQ38A12-11CC20-LH; Pressure Port Size, Cover End:3; Port Size:Flange; Major Diameter [Min:N/A; Cover End Flow @ RPM:Standard Pilot; Shaft End RPM [Max:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
high quality excavator hydraulic cylinder EX270-5 for Hitachi manufacturerSpline Description:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Seal Material:3525VQ38A12-11CC20-LH; Port Orientation - Cover End:3; Shaft End Pressure [Max:Flange; Major Diameter [Min:N/A; Minor Diameter:Standard Pilot; Shaft Seal Type:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
DB58T Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH220-5Shaft Dia.:76.0 LB; Weight:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Port Orientation - Cover End:3525VQ38A12-11CC20-LH; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:Flange; Cover End RPM [Max:N/A; Shaft Seal Type:Standard Pilot; Rotation:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
6D108 Oil Pump 6221-53-1100 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8GPM @ 1,800 rpm, Shaft End:76.0 LB; Cover End Pressure [Max:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Model No.:3525VQ38A12-11CC20-LH; Relief Valve Setting:3; Seal Material:Flange; Shaft End Pressure [Max:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Mounting:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
SAA6D107E-1 Engine Crankshaft 6754-01-1310 for Komatsu Excavator PC200-8 PC200LC-8 PC220-8 PC240-8Shaft Key:76.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Max:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ38A12-11CC20-LH; Shaft Seal Type:3; Pressure Port Size, Cover End:Flange; Pilot Type:N/A; Port Size:Standard Pilot; Integral Valve Configuration:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
high quality piston hydraulic cylinder CLG907 manufacturerGPM @ 1,800 rpm, Shaft End:76.0 LB; Weight:Flange Mount; Shaft Key:Left Hand (CCW); Shaft End Pressure [Max:3525VQ38A12-11CC20-LH; Max. RPM [Max:3; Shaft End Flow @ RPM:Flange; Major Diameter [Max:N/A; Port Type:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
J05E Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK250-8Manufacturer Part No.:76.0 LB; Minor Diameter [Min:Flange Mount; Spline Description:Left Hand (CCW); Cover End Flow @ RPM:3525VQ38A12-11CC20-LH; Weight:3; Shaft Length:Flange; Integral Valve Configuration:N/A; Cover End RPM [Max:Standard Pilot; Major Diameter [Min:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
S6D105 Engine Parts 6136-61-1501 Water Pump for KomatsuCover End RPM [Max:76.0 LB; Shaft Type:Flange Mount; Minor Diameter:Left Hand (CCW); Weight:3525VQ38A12-11CC20-LH; Controlled Flow Rate:3; Displacement Cover End (cu in/revolution):Flange; Shaft Length:N/A; Cover End Flow @ RPM:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;
4D21 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD400/450Manufacturer Part No.:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Controlled Flow Rate:3525VQ38A12-11CC20-LH; Spline Description:3; Mounting Flange:Flange; Pilot Type:N/A; Port Orientation - Shaft End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Port Size:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A12-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.45; Displacement Shaft End (cu in/revolution):7.42;

 

 

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed high quality carrier roller DH300-5 for Daewoo excavator undercarriage parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us