• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>Oil radiator ZX200-3G water radiator for hitaichi excavator parts

  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts
  • Oil radiator ZX200-3G water radiator for hitaichi excavator parts

Oil radiator ZX200-3G water radiator for hitaichi excavator parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Oil radiator ZX200-3G water radiator for hitaichi excavator parts

category

excavator

Oil radiator ZX200-3G water radiator for hitaichi excavator parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Oil radiator ZX200-3G water radiator for hitaichi excavator parts Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1.3125 in
  • Double
  • Buna-N
  • 2.6
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2400
  • N/A
  • 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
  • V2010-1F13S6S-11CC12LH
  • 2200
  • 2200
  • 9
  • 19.5
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.2

Oil radiator ZX200-3G water radiator for hitaichi excavator parts Products and services

 

Oil radiator EC240B water radiator for volvo excavator partsModel No.:30.0 LB; Cover End Pressure [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Shaft End Flow @ RPM:V2010-1F13S6S-11CC12LH; Shaft Seal Type:1.5; Pressure Port Size, Shaft End:Flange; Weight:N/A; Major Diameter [Max:N/A; Shaft Key:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
high quality excavator hydraulic arm cylinder ZY80 manufacturerRelief Valve Setting:30.0 LB; Model No.:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Controlled Flow Rate:V2010-1F13S6S-11CC12LH; Integral Valve Configuration:1.5; Major Diameter [Max:Flange; Minor Diameter [Min:N/A; Minor Diameter [Max:N/A; Shaft Seal Type:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
SAA6D125 Engine Flywheel Assembly 6251-31-1630 for Komatsu Excavator PC400-8 PC450-8Shaft Seal Type:30.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Type:Left Hand (CCW); Cover End Pressure [Max:V2010-1F13S6S-11CC12LH; Shaft End Flow @ RPM:1.5; Shaft End RPM [Max:Flange; Mounting Flange:N/A; Mounting:N/A; Weight:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
Hydraulic Main Pump For Hitachi Excavator EX1200 and Spare PartsShaft Type:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Minor Diameter [Min:V2010-1F13S6S-11CC12LH; GPM @ 1,800 rpm, Cover End:1.5; Displacement Shaft End (cu in/revolution):Flange; Port Type:N/A; Major Diameter [Min:N/A; Rotation:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
S6D155 Starter Motor Starting Motor 600-813-4812 for Komatsu Bulldozer D155 D355Max. RPM [Max:30.0 LB; Pressure Port Size, Shaft End:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Model No.:V2010-1F13S6S-11CC12LH; Relief Valve Setting:1.5; Integral Valve Configuration:Flange; Major Diameter [Max:N/A; Shaft End RPM [Max:N/A; Cover End RPM [Max:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
Oil radiator YC240LC-8 water radiator for Yuchai excavator partsPort Orientation - Cover End:30.0 LB; Spline Description:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Displacement Cover End (cu in/revolution):V2010-1F13S6S-11CC12LH; Controlled Flow Rate:1.5; Shaft End Flow @ RPM:Flange; Seal Material:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Integral Valve Configuration:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R200-5Max. RPM [Max:30.0 LB; Minor Diameter [Min:Flange Mount; Pump Series:Left Hand (CCW); Pressure Port Size, Shaft End:V2010-1F13S6S-11CC12LH; Weight:1.5; Shaft Length:Flange; Shaft End Flow @ RPM:N/A; Displacement Cover End (cu in/revolution):N/A; Major Diameter [Max:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for CAT320DGPM @ 1,800 rpm, Shaft End:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft Length:Left Hand (CCW); Model No.:V2010-1F13S6S-11CC12LH; GPM @ 1,800 rpm, Cover End:1.5; Port Orientation - Cover End:Flange; Shaft End Pressure [Max:N/A; Seal Material:N/A; Port Orientation - Shaft End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
Top Quality Starter Motor S6D125 Starting Motor 600-813-3912 for PC300-3 PC400-3Minor Diameter [Max:30.0 LB; Cover End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Type:V2010-1F13S6S-11CC12LH; Shaft Length:1.5; Shaft Seal Type:Flange; Port Orientation - Shaft End:N/A; Cover End RPM [Max:N/A; Mounting Flange:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;
6D16 Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK320Shaft Dia.:30.0 LB; Port Orientation - Shaft End:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Length:V2010-1F13S6S-11CC12LH; Rotation:1.5; Shaft End Pressure [Max:Flange; Minor Diameter:N/A; Mounting Flange:N/A; Pressure Port Size, Cover End:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-11CC12LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.2; Displacement Shaft End (cu in/revolution):2.6;

 

 

Oil radiator ZX200-3G water radiator for hitaichi excavator parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Oil radiator ZX200-3G water radiator for hitaichi excavator parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Oil radiator ZX200-3G water radiator for hitaichi excavator parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us