• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3

  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3
  • S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3

category

excavator

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 Technical information

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1.75 in
  • Buna-N
  • 1800
  • 0.7285 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520V17A5-11DD22R
  • 3000
  • 2500
  • 7.5
  • 25.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 1.1
  • 3.4

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 Products and services

 

S6D105 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC220-1Displacement Cover End (cu in/revolution):45.0 LB; Minor Diameter:Flange Mount; Major Diameter [Max:Right Hand (CW); Spline Description:2520V17A5-11DD22R; Shaft End Flow @ RPM:2 1/2; Weight:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Seal Material:Standard Pilot; Major Diameter [Min:1.09 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
Top Quality WA320-1 WA350-1 Engine Alternator 600-821-5630 S6D105 Engine PartsShaft End RPM [Max:45.0 LB; Relief Valve Setting:Flange Mount; Cover End RPM [Max:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520V17A5-11DD22R; Displacement Shaft End (cu in/revolution):2 1/2; Max. RPM [Max:Flange; GPM @ 1,800 rpm, Cover End:N/A; Port Type:Standard Pilot; Pressure Port Size, Shaft End:1.09 in; Pump Series:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
6D125 Engine Parts Alternator 600-821-7220 for Komatsu WA470-3Pressure Port Size, Cover End:45.0 LB; Shaft End RPM [Max:Flange Mount; Port Type:Right Hand (CW); Shaft Length:2520V17A5-11DD22R; Displacement Cover End (cu in/revolution):2 1/2; Port Orientation - Cover End:Flange; Seal Material:N/A; Port Orientation - Shaft End:Standard Pilot; Model No.:1.09 in; Mounting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
6D105 Starter Motor Starting Motor 600-813-3650 for Komatsu Wheel Loader WA400-1 WA300-1Displacement Shaft End (cu in/revolution):45.0 LB; Minor Diameter:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Mounting:2520V17A5-11DD22R; Shaft Length:2 1/2; Minor Diameter [Max:Flange; Shaft End Flow @ RPM:N/A; Integral Valve Configuration:Standard Pilot; Cover End Pressure [Max:1.09 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
SA6D170 Engine Parts Alternator 600-821-7610 for Komatsu D375AMajor Diameter [Min:45.0 LB; Shaft Key:Flange Mount; Major Diameter [Max:Right Hand (CW); Manufacturer Part No.:2520V17A5-11DD22R; Port Size:2 1/2; Shaft End RPM [Max:Flange; Minor Diameter:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Pressure Port Size, Shaft End:1.09 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
Top Quality PC200-3 PC220-3 Engine Alternator 600-821-5580 S6D105 Engine PartsCover End RPM [Max:45.0 LB; Relief Valve Setting:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft Type:2520V17A5-11DD22R; Shaft Length:2 1/2; Integral Valve Configuration:Flange; Port Type:N/A; Port Orientation - Cover End:Standard Pilot; Shaft End Flow @ RPM:1.09 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
Hydraulic Main Pump For Hitachi Excavator EX60-5 and Spare PartsIntegral Valve Configuration:45.0 LB; Spline Description:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Shaft Seal Type:2520V17A5-11DD22R; Rotation:2 1/2; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Max:N/A; Model No.:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
4TNV-94L Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R55-7SRotation:45.0 LB; Minor Diameter [Max:Flange Mount; Mounting:Right Hand (CW); Minor Diameter:2520V17A5-11DD22R; Port Orientation - Cover End:2 1/2; Max. RPM [Max:Flange; Pump Series:N/A; Cover End Pressure [Max:Standard Pilot; Mounting Flange:1.09 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
For Komatsu Excavator PC200-8 Engine Cylinder Head Seal 6754-41-4540 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Relief Valve Setting:45.0 LB; Cover End Flow @ RPM:Flange Mount; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Max:2520V17A5-11DD22R; Shaft Length:2 1/2; Shaft Dia.:Flange; Shaft Type:N/A; Pressure Port Size, Cover End:Standard Pilot; Shaft Seal Type:1.09 in; Port Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;
SH350HD-2 Oil Cooler for Sumitomo ExcavatorMajor Diameter [Min:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Spline Description:Right Hand (CW); Controlled Flow Rate:2520V17A5-11DD22R; Minor Diameter [Max:2 1/2; Port Orientation - Shaft End:Flange; Shaft End Pressure [Max:N/A; Max. RPM [Max:Standard Pilot; Port Size:1.09 in; Model No.:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A5-11DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):3.4;

 

 

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed S6D125 Starter Motor Starting Motor 600-813-3912 for Komatsu Excavator PC300-3 PC400-3 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us