• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375

  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375
  • S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375

category

excavator

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 Technical information

  • 1.25 in
  • Straight w/ Key
  • 4525VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2200
  • 2200
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm
  • 4525VQ50A14-1AA20LH
  • 3000
  • 2500
  • 21
  • 75
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 2.77
  • 9.9

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 Products and services

 

Oil radiator 915D water radiator for CLG liugong excavator partsPressure Port Size, Cover End:101.0 LB; Shaft Seal Type:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Major Diameter [Max:4525VQ50A14-1AA20LH; Shaft Key:3 1/2; Mounting Flange:Flange; Port Orientation - Shaft End:5/16 in; Minor Diameter [Min:Standard Pilot; Shaft Type:1.25 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
Oil radiator PC450-8 water radiator for komatsvu excavator partsShaft Key:101.0 LB; Max. RPM [Max:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Pressure Port Size, Cover End:4525VQ50A14-1AA20LH; Minor Diameter [Min:3 1/2; Shaft Seal Type:Flange; GPM @ 1,800 rpm, Shaft End:5/16 in; Port Size:Standard Pilot; Minor Diameter:1.25 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
S6D95 Engine Parts Alternator 600-821-7530 for Komatsu WA200Port Size:101.0 LB; Shaft Dia.:Flange Mount; Model No.:Left Hand (CCW); Minor Diameter:4525VQ50A14-1AA20LH; Weight:3 1/2; Max. RPM [Max:Flange; Minor Diameter [Max:5/16 in; Shaft Key:Standard Pilot; Major Diameter [Min:1.25 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
Top Quality WA380-3 Engine Alternator 600-821-7420 S6D125-2 Engine PartsPressure Port Size, Cover End:101.0 LB; Shaft Type:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Seal Material:4525VQ50A14-1AA20LH; Pilot Type:3 1/2; Shaft Length:Flange; Shaft End RPM [Max:5/16 in; Displacement Cover End (cu in/revolution):Standard Pilot; Rotation:1.25 in; Spline Description:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
S6D107 Oil Pump 6754-51-1110 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Integral Valve Configuration:101.0 LB; Max. RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft End RPM [Max:4525VQ50A14-1AA20LH; GPM @ 1,800 rpm, Cover End:3 1/2; Displacement Shaft End (cu in/revolution):Flange; Cover End Pressure [Max:5/16 in; Shaft Dia.:Standard Pilot; Minor Diameter:1.25 in; Controlled Flow Rate:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
6D114 Engine Injector 6743-11-3320 for Komatsu Excavator PC300-7 PC360-7Port Type:101.0 LB; Cover End Flow @ RPM:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Rotation:4525VQ50A14-1AA20LH; Displacement Cover End (cu in/revolution):3 1/2; Max. RPM [Max:Flange; Controlled Flow Rate:5/16 in; Model No.:Standard Pilot; Seal Material:1.25 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
Oil radiator DH330 water radiator for DEAWOO DOOSAN excavator partsSeal Material:101.0 LB; Port Orientation - Cover End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft Dia.:4525VQ50A14-1AA20LH; Shaft Key:3 1/2; GPM @ 1,800 rpm, Cover End:Flange; Minor Diameter [Max:5/16 in; Weight:Standard Pilot; Shaft End Pressure [Max:1.25 in; Shaft Length:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
S6D125 Starter Motor Starting Motor 600-813-8320 for Komatsu Excavator PC400-6Model No.:101.0 LB; Controlled Flow Rate:Flange Mount; Spline Description:Left Hand (CCW); Pressure Port Size, Cover End:4525VQ50A14-1AA20LH; Port Size:3 1/2; Displacement Cover End (cu in/revolution):Flange; GPM @ 1,800 rpm, Shaft End:5/16 in; Minor Diameter:Standard Pilot; Shaft Seal Type:1.25 in; Relief Valve Setting:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
Top Quality PC300-6 PC350-6 Engine Alternator 600-825-3261 6D108 Engine PartsDisplacement Shaft End (cu in/revolution):101.0 LB; Major Diameter [Min:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:4525VQ50A14-1AA20LH; Relief Valve Setting:3 1/2; Port Type:Flange; Max. RPM [Max:5/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Cover End Pressure [Max:1.25 in; Seal Material:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;
Top Quality GD305 Engine Alternator 600-821-7520 6D95 Engine PartsShaft Seal Type:101.0 LB; Weight:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Displacement Cover End (cu in/revolution):4525VQ50A14-1AA20LH; Pilot Type:3 1/2; Mounting:Flange; Pressure Port Size, Cover End:5/16 in; Cover End Pressure [Max:Standard Pilot; Shaft Dia.:1.25 in; Shaft Length:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ50A14-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):9.9;

 

 

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed S6D170 Starter Motor Starting Motor 600-813-3610 for Komatsu Bulldozer D135A D85 D375 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us