• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7

  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7
  • Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7

category

Relief valve and other valve

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 Systems

  • 1.25 in
  • 14 Tooth Splined
  • 4525VQ
  • 1.9375 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4525VQ42A21-11AA20-LH
  • 3000
  • 2500
  • 31.5
  • 63
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 4.12
  • 8.46

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 Dimensions

 

Hot sale For KYB PSV2-55T For Sumitomo 120 excavator pump partsCover End Pressure [Max:101.0 LB; Relief Valve Setting:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Manufacturer Part No.:4525VQ42A21-11AA20-LH; Mounting Flange:3 1/2; Rotation:Flange; Seal Material:N/A; Shaft Key:Standard Pilot; Minor Diameter:1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Japan brand bulldozer D85XP-15 radiator sensor 7861-93-4520Shaft End RPM [Max:101.0 LB; Major Diameter [Min:Flange Mount; Seal Material:Left Hand (CCW); Displacement Shaft End (cu in/revolution):4525VQ42A21-11AA20-LH; Manufacturer Part No.:3 1/2; Minor Diameter [Max:Flange; Shaft Key:N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End Pressure [Max:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Hot sale for caterpillar MS180 SPV10 double pump excavator pump partsMajor Diameter [Max:101.0 LB; Pilot Type:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Model No.:4525VQ42A21-11AA20-LH; Shaft End Pressure [Max:3 1/2; Cover End RPM [Max:Flange; Spline Description:N/A; Weight:Standard Pilot; Cover End Flow @ RPM:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
rexroth Hydraulic motor A6VM80 pump A6VM series bomba a6vm 80 piston motorWeight:101.0 LB; Cover End RPM [Max:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Minor Diameter:4525VQ42A21-11AA20-LH; Major Diameter [Min:3 1/2; Controlled Flow Rate:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Max. RPM [Max:Standard Pilot; Shaft Length:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Hot sale For Toshiba SG02 excavator swing motor partsMinor Diameter [Max:101.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft Length:4525VQ42A21-11AA20-LH; Mounting Flange:3 1/2; Pressure Port Size, Cover End:Flange; Minor Diameter:N/A; Relief Valve Setting:Standard Pilot; Shaft End Pressure [Max:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
07443-67503 Work Pump for KOMATSU D60A/E/P/PL-6/D65A/E/P/PLL-6Port Size:101.0 LB; Shaft Seal Type:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft End Pressure [Max:4525VQ42A21-11AA20-LH; Model No.:3 1/2; Rotation:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Max. RPM [Max:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
handok hitachi excavator hydraulic pump spare parts ZX450 cylinder block valve plate piston shoe retainer plate servo pinPressure Port Size, Cover End:101.0 LB; Shaft Seal Type:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Shaft End RPM [Max:4525VQ42A21-11AA20-LH; Model No.:3 1/2; Port Type:Flange; Shaft End Flow @ RPM:N/A; Minor Diameter [Min:Standard Pilot; Shaft Key:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
705-51-30240 Lift dump steering Pump for KOMATSU D135A-1Cover End RPM [Max:101.0 LB; Shaft End RPM [Max:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Shaft Length:4525VQ42A21-11AA20-LH; Pressure Port Size, Shaft End:3 1/2; Rotation:Flange; Pressure Port Size, Cover End:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Major Diameter [Min:1.25 in; Weight:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
705-51-10020 for KOMATSU GD500R PC200-2 PC220/LC-2Displacement Cover End (cu in/revolution):101.0 LB; Pilot Type:Flange Mount; Spline Description:Left Hand (CCW); Pressure Port Size, Cover End:4525VQ42A21-11AA20-LH; Max. RPM [Max:3 1/2; Shaft Type:Flange; Shaft Dia.:N/A; Port Size:Standard Pilot; Cover End RPM [Max:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Hot sale for for komatsu MSG-60P excavator pump partsCover End Pressure [Max:101.0 LB; Integral Valve Configuration:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft End Pressure [Max:4525VQ42A21-11AA20-LH; Port Size:3 1/2; Cover End RPM [Max:Flange; Controlled Flow Rate:N/A; Seal Material:Standard Pilot; Shaft Key:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;

 

 

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Genuine Quality Excavator Spare Parts 208-70-61521 Bushing for Komatsu PC400-7 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us