• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>705-51-30360 Work Pump for KOMATSU D155AX-3

  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3
  • 705-51-30360 Work Pump for KOMATSU D155AX-3

705-51-30360 Work Pump for KOMATSU D155AX-3 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

705-51-30360 Work Pump for KOMATSU D155AX-3

category

Relief valve and other valve

705-51-30360 Work Pump for KOMATSU D155AX-3 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

705-51-30360 Work Pump for KOMATSU D155AX-3 Systems

  • Open Circuit Axial
  • 1800 rpm
  • 35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm
  • 2 1/2 in 4-Bolt Flange/Code 61
  • 1.23 in
  • 1.23
  • 14 Tooth Splined
  • 63 / 1800
  • 1 1/4 in 4-Bolt Flange/Code 62
  • Electric Motor Speeds
  • Pressure & Flow Compensator w/Plugged Orifice
  • 48 mm
  • Side Port
  • Buna-N
  • 14T-12/24
  • 5 in
  • 63
  • SAE C, 4 Bolt
  • 6 3/8 in
  • Adjustable Maximum Displacement Stop & Single Shaft Seal
  • SAE C
  • 5660
  • 12/24
  • 4000
  • 126 hp
  • PVM141ER11GS02AAC2320000AA0A
  • SAE A, 2 Bolt, 9 Tooth Spline
  • 8.6
  • 367
  • 20 Bar
  • 4000 psi
  • 3300
  • 3600
  • 230 Bar

705-51-30360 Work Pump for KOMATSU D155AX-3 Dimensions

 

Genuine Quality Excavator Spare Parts 20Y-70-32410 Bushing for Komatsu PC220-8Shaft Length:N/A; Minor Diameter [Max:Standard Blue Paint; Displacement Shaft End (cu in/revolution):Axial Piston Pumps; Relief Valve Setting:PVM141; Pump Series:145.0 LB; Shaft End RPM [Max:Right Hand (CW); Cover End Flow @ RPM:PVM141ER11GS02AAC2320000AA0A; Controlled Flow Rate:Flange Ports; Max. RPM [Max:Open Circuit Axial; Shaft End Pressure [Max:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
Genuine Quality Excavator Spare Parts 707-76-65210 Bushing for Komatsu PC270-7Port Size:N/A; Minor Diameter [Min:Standard Blue Paint; Spline Description:Axial Piston Pumps; Shaft End Pressure [Max:PVM141; Pressure Port Size, Cover End:145.0 LB; Relief Valve Setting:Right Hand (CW); Pressure Port Size, Shaft End:PVM141ER11GS02AAC2320000AA0A; GPM @ 1,800 rpm, Cover End:Flange Ports; Rotation:Open Circuit Axial; Weight:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
rexroth pump parts A4VG71Pump Series:N/A; Major Diameter [Max:Standard Blue Paint; Port Orientation - Cover End:Axial Piston Pumps; Shaft Type:PVM141; Displacement Cover End (cu in/revolution):145.0 LB; Mounting:Right Hand (CW); Minor Diameter [Max:PVM141ER11GS02AAC2320000AA0A; Minor Diameter [Min:Flange Ports; Pressure Port Size, Shaft End:Open Circuit Axial; Pilot Type:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
OEM excavator 4D95 cylinder head gasket PC60 PC200-5 PC300-6 HD800/900 E320 EX200-2 engine partsMinor Diameter [Max:N/A; Cover End Flow @ RPM:Standard Blue Paint; Cover End Pressure [Max:Axial Piston Pumps; Port Orientation - Shaft End:PVM141; GPM @ 1,800 rpm, Shaft End:145.0 LB; Seal Material:Right Hand (CW); Cover End RPM [Max:PVM141ER11GS02AAC2320000AA0A; Spline Description:Flange Ports; Manufacturer Part No.:Open Circuit Axial; Port Size:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
Genuine Quality Excavator Spare Parts 207-70-72460 Bushing for Komatsu PC300-7Minor Diameter:N/A; Mounting Flange:Standard Blue Paint; Shaft Seal Type:Axial Piston Pumps; Major Diameter [Max:PVM141; Weight:145.0 LB; Port Size:Right Hand (CW); Shaft End Flow @ RPM:PVM141ER11GS02AAC2320000AA0A; Spline Description:Flange Ports; Seal Material:Open Circuit Axial; Pressure Port Size, Cover End:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
704-11-38100 Work Pump for KOMATSU D53A/P/S-16/17/D57S-1Port Size:N/A; Pump Series:Standard Blue Paint; GPM @ 1,800 rpm, Cover End:Axial Piston Pumps; Shaft Type:PVM141; Minor Diameter [Min:145.0 LB; Shaft End Flow @ RPM:Right Hand (CW); Shaft End Pressure [Max:PVM141ER11GS02AAC2320000AA0A; Shaft End RPM [Max:Flange Ports; Shaft Length:Open Circuit Axial; Cover End Flow @ RPM:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
20Y-979-3120 Tank Receiver for Excavator PC300-8 PC450-8 PC400-8Minor Diameter:N/A; Model No.:Standard Blue Paint; Port Orientation - Shaft End:Axial Piston Pumps; Port Size:PVM141; Pressure Port Size, Cover End:145.0 LB; Major Diameter [Min:Right Hand (CW); Pump Series:PVM141ER11GS02AAC2320000AA0A; Integral Valve Configuration:Flange Ports; Minor Diameter [Min:Open Circuit Axial; Displacement Cover End (cu in/revolution):1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
Competitive factory price PC60-7 excavator hydraulic main pump parts HPV75 pump partsMounting Flange:N/A; Pump Series:Standard Blue Paint; GPM @ 1,800 rpm, Shaft End:Axial Piston Pumps; Shaft Length:PVM141; Port Orientation - Shaft End:145.0 LB; Seal Material:Right Hand (CW); Rotation:PVM141ER11GS02AAC2320000AA0A; GPM @ 1,800 rpm, Cover End:Flange Ports; Pressure Port Size, Cover End:Open Circuit Axial; Shaft End Flow @ RPM:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
rexroth pump parts A10VG45Shaft End Pressure [Max:N/A; Seal Material:Standard Blue Paint; Cover End RPM [Max:Axial Piston Pumps; Controlled Flow Rate:PVM141; Integral Valve Configuration:145.0 LB; Pressure Port Size, Shaft End:Right Hand (CW); Minor Diameter [Max:PVM141ER11GS02AAC2320000AA0A; Weight:Flange Ports; Port Orientation - Cover End:Open Circuit Axial; Shaft Length:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;
Swing slew device PC60-7 201-26-00140 excavator reduction gearbox spare partsGPM @ 1,800 rpm, Cover End:N/A; Manufacturer Part No.:Standard Blue Paint; Pump Series:Axial Piston Pumps; Port Orientation - Cover End:PVM141; Relief Valve Setting:145.0 LB; Mounting:Right Hand (CW); Shaft Length:PVM141ER11GS02AAC2320000AA0A; Minor Diameter [Max:Flange Ports; Displacement Shaft End (cu in/revolution):Open Circuit Axial; GPM @ 1,800 rpm, Shaft End:1800 rpm; Flow @ RPM:35 gpm @ 1000 rpm, 42 gpm @ 1200 rpm, 53 gpm @ 1500 rpm, 63 gpm @ 1800 rpm; Inlet Port:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.23 in; Shaft Size:1.23; Shaft Type:14 Tooth Splined; GPM @ Speed:63 / 1800; Outlet Port:1 1/4 in 4-Bolt Flange/Code 62; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:48 mm; Port Location:Side Port; Seal Material:Buna-N; Shaft Details:14T-12/24; Pilot Diameter:5 in; GPM @ 1,800 rpm:63; Mounting Flange:SAE C, 4 Bolt; Bolt Circle Dia.:6 3/8 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE C; Input Torque [Max:5660; Spline Description:12/24; Peak Pressure [Max:4000; HP @ 1,800 rpm [Max:126 hp; Manufacturer Part No.:PVM141ER11GS02AAC2320000AA0A; Auxiliary Mounting Pad:SAE A, 2 Bolt, 9 Tooth Spline; Displacement (in³/rev):8.6; Torque @ 3000 psi [Max:367; Flow Compensator Setting:20 Bar; Operating Pressure [Max:4000 psi; Continuous Pressure [Max:3300; Intermittent Pressure [Max:3600; Pressure Compensator Setting:230 Bar;

 

 

705-51-30360 Work Pump for KOMATSU D155AX-3 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

705-51-30360 Work Pump for KOMATSU D155AX-3 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 705-51-30360 Work Pump for KOMATSU D155AX-3 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us