• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V

  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V
  • Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V

category

Relief valve and other valve

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V Systems

  • Standard Pilot
  • 0.875 in
  • Straight w/ Key
  • 2520V
  • 2.32 in
  • Double
  • Buna-N
  • 2.8
  • N/A
  • SAE B, 2 Bolt
  • 1 in Code 61
  • N/A
  • Outlet 45° CW from Inlet
  • 1800
  • 1800
  • N/A
  • 3/4 in Code 61
  • Outlet Inline w/Inlet
  • N/A
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520V-21A14-1CC22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 02-102511
  • 02-102535
  • N/A
  • 2500
  • 4.1
  • 31.5
  • 45° CW From Inlet Port

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V Dimensions

 

for Hitachi final drive travel swing motor EX25 EX30-2 EX40-2 EX45 EX55 EX60 EX75 EX90 EX100 EX120 ZX27 ZX45 ZX55UR ZX75Model No.:45.0 LB; Cover End RPM [Max:Flange Mount; Mounting:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520V-21A14-1CC22R; Seal Material:2.5; Displacement Cover End (cu in/revolution):Flange; Shaft End Pressure [Max:1/4 in; Shaft End Flow @ RPM:22; GPM @ 1,800 rpm, Cover End:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
For For Kobelco SK200-3 hydraulic piston pump for excavator hydraulic pump For Kawasaki main pump K3V112BDT-1R0R-0E11Pilot Type:45.0 LB; Shaft Dia.:Flange Mount; Minor Diameter [Min:Right Hand (CW); Rotation:2520V-21A14-1CC22R; Port Type:2.5; Cover End Flow @ RPM:Flange; Shaft End Flow @ RPM:1/4 in; Shaft Key:22; Cover End RPM [Max:Standard Pilot; Shaft Type:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Hot sale for caterpillar MS180 SPV10 double pump excavator pump partsMounting:45.0 LB; Port Size:Flange Mount; Rotation:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520V-21A14-1CC22R; Shaft Seal Type:2.5; Pump Series:Flange; Integral Valve Configuration:1/4 in; Weight:22; Seal Material:Standard Pilot; Mounting Flange:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
07429-71203 Steer Pump for KOMATSU D53A/P/S-16/17/D57S-1/D58E-1Major Diameter [Max:45.0 LB; Minor Diameter [Max:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Weight:2520V-21A14-1CC22R; Shaft End Flow @ RPM:2.5; Shaft Key:Flange; Spline Description:1/4 in; Port Orientation - Cover End:22; Shaft End Pressure [Max:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Genuine Quality Excavator Spare Parts 207-70-32150 Bushing for Komatsu PC360-7Port Orientation - Shaft End:45.0 LB; Integral Valve Configuration:Flange Mount; Minor Diameter [Max:Right Hand (CW); Mounting Flange:2520V-21A14-1CC22R; Cover End Pressure [Max:2.5; Model No.:Flange; Displacement Cover End (cu in/revolution):1/4 in; Minor Diameter [Min:22; Port Size:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
excavator PC60 forged steel 4d95 diesel engine crankshaft parts 6204-33-1100Relief Valve Setting:45.0 LB; Cover End RPM [Max:Flange Mount; Weight:Right Hand (CW); Mounting Flange:2520V-21A14-1CC22R; Cover End Pressure [Max:2.5; Shaft Seal Type:Flange; Pilot Type:1/4 in; Shaft Type:22; Max. RPM [Max:Standard Pilot; Controlled Flow Rate:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Rexroth hydraulic parts A11VO210 pump parts A4VSO A10VSO A4VG A11VPressure Port Size, Cover End:45.0 LB; Shaft Type:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520V-21A14-1CC22R; Major Diameter [Max:2.5; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Max:1/4 in; Weight:22; Shaft End Flow @ RPM:Standard Pilot; Shaft Seal Type:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
705-56-34100 Lift dump steering pump for KOMATSU WA420-1 SN20001-Minor Diameter [Max:45.0 LB; Pilot Type:Flange Mount; Port Size:Right Hand (CW); Cover End RPM [Max:2520V-21A14-1CC22R; Model No.:2.5; Shaft End RPM [Max:Flange; Seal Material:1/4 in; GPM @ 1,800 rpm, Cover End:22; Pump Series:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
705-21-43070 Work Pump for KOMATSU D155AX-6Controlled Flow Rate:45.0 LB; Port Orientation - Shaft End:Flange Mount; Manufacturer Part No.:Right Hand (CW); Port Orientation - Cover End:2520V-21A14-1CC22R; GPM @ 1,800 rpm, Cover End:2.5; Pressure Port Size, Shaft End:Flange; Shaft End RPM [Max:1/4 in; Port Size:22; Shaft End Pressure [Max:Standard Pilot; Spline Description:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
708-3S-04572Shaft End Pressure [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Port Orientation - Shaft End:2520V-21A14-1CC22R; Max. RPM [Max:2.5; Spline Description:Flange; Major Diameter [Min:1/4 in; Port Type:22; Cover End RPM [Max:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-21A14-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102511; Shaft End Cartridge Kit:02-102535; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;

 

 

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Rexroth hydraulic parts hydraulic parts for rexroth pump parts A4VSO A10VSO A4VG A11V Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us