• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator

  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator
  • HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator

category

Relief valve and other valve

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator Systems

  • 1.56 in
  • 14 Tooth Splined
  • 4535V
  • 2.4375 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4535V42A25-11DD22R
  • 2500
  • 2500
  • 37.5
  • 63
  • N/A
  • Outlet 90° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1 1/4 in Code 61
  • 1 1/2 in Code 61
  • 4.9
  • 8.4

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator Dimensions

 

705-55-23040 PUMP ASS Y for KOMATSUCover End RPM [Max:118.0 LB; Controlled Flow Rate:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft Length:4535V42A25-11DD22R; Mounting Flange:4; Mounting:Flange; Shaft Dia.:N/A; Port Orientation - Cover End:Standard Pilot; Cover End Pressure [Max:1.56 in; Spline Description:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Hot sale for Hitachi EX300 HMT145 excavator pump partsShaft Dia.:118.0 LB; Shaft End Flow @ RPM:Flange Mount; Controlled Flow Rate:Right Hand (CW); Major Diameter [Max:4535V42A25-11DD22R; Displacement Cover End (cu in/revolution):4; Mounting Flange:Flange; Minor Diameter [Max:N/A; Pump Series:Standard Pilot; Shaft End RPM [Max:1.56 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
705-51-30290 Power Pump for KOMATSU D155A-3-5Mounting:118.0 LB; Pressure Port Size, Shaft End:Flange Mount; Minor Diameter:Right Hand (CW); Displacement Shaft End (cu in/revolution):4535V42A25-11DD22R; Displacement Cover End (cu in/revolution):4; Shaft Dia.:Flange; GPM @ 1,800 rpm, Cover End:N/A; Port Orientation - Cover End:Standard Pilot; Shaft Key:1.56 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Hot sale For Kawasaki GM05VA excavator swing motor partsSpline Description:118.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Major Diameter [Max:4535V42A25-11DD22R; Shaft Dia.:4; Mounting Flange:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft End Flow @ RPM:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.56 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Hot sale For Kawasaki GM23 excavator swing motor partsPort Type:118.0 LB; Minor Diameter [Max:Flange Mount; Mounting:Right Hand (CW); Port Orientation - Cover End:4535V42A25-11DD22R; Shaft Dia.:4; Seal Material:Flange; Model No.:N/A; Weight:Standard Pilot; Manufacturer Part No.:1.56 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
705-11-33011 Main Steering pump for KOMATSU WA100-1/WA120-3/WA120-3-3T/GD605A-3,705-11-33011GPM @ 1,800 rpm, Shaft End:118.0 LB; Max. RPM [Max:Flange Mount; Seal Material:Right Hand (CW); Port Type:4535V42A25-11DD22R; Weight:4; Shaft Type:Flange; Spline Description:N/A; Manufacturer Part No.:Standard Pilot; Shaft End RPM [Max:1.56 in; Shaft Length:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
K3V112DT-9C32 bomba: R220-5 R210-7 R215-7 R225-7 Hyundai hydraulic pump for excavatorShaft Type:118.0 LB; Shaft End Pressure [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Type:4535V42A25-11DD22R; Cover End Pressure [Max:4; Cover End RPM [Max:Flange; Pilot Type:N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End Flow @ RPM:1.56 in; Shaft Seal Type:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Hot sale for For Rexroth A11VG50 excavator pump partsSeal Material:118.0 LB; Pilot Type:Flange Mount; Spline Description:Right Hand (CW); GPM @ 1,800 rpm, Cover End:4535V42A25-11DD22R; Shaft Length:4; Shaft End RPM [Max:Flange; Shaft End Flow @ RPM:N/A; Shaft Key:Standard Pilot; Cover End Flow @ RPM:1.56 in; Major Diameter [Min:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Factory Price 6506-21-5020 Turbocharger for PC450LC,PC450-8 SAA6D125E Engine TurboIntegral Valve Configuration:118.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Rotation:Right Hand (CW); Cover End RPM [Max:4535V42A25-11DD22R; GPM @ 1,800 rpm, Shaft End:4; Shaft Length:Flange; Minor Diameter [Min:N/A; Cover End Flow @ RPM:Standard Pilot; Seal Material:1.56 in; Shaft Seal Type:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
705-11-33014 Hydraulic Pump for KOMATSU GD505A-2Seal Material:118.0 LB; Weight:Flange Mount; Major Diameter [Max:Right Hand (CW); Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:4; Mounting:Flange; Relief Valve Setting:N/A; Cover End RPM [Max:Standard Pilot; Shaft Type:1.56 in; Shaft Dia.:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;

 

 

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed HPV95 HPV132 PC360-7 PC200-8 PC240-8 PC1250 hydraulic pump parts for excavator Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us