• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7

  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7
  • PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7

category

Relief valve and other valve

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 Systems

  • 0.875 in
  • Straight w/ Key
  • V2010
  • 2 5/16 in
  • Buna-N
  • 2800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2800
  • 2800
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm
  • V2010-1F9S7S-1DD12
  • 2000
  • 2500
  • 10.5
  • 13.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.39
  • 1.81

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 Dimensions

 

genuine variable rexroth hydraulic pump A10VO18 A10VO28 A10VO45 A10VO71 A10VSO74 A10VSO140Shaft Length:30.0 LB; Mounting Flange:Flange Mount; Manufacturer Part No.:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F9S7S-1DD12; Integral Valve Configuration:1 1/2; Model No.:Flange; Port Type:3/16 in; Pressure Port Size, Cover End:N/A; Weight:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Hot sale For For Kobelco SK200-1-3 excavator motor partsShaft Length:30.0 LB; Major Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Orientation - Shaft End:V2010-1F9S7S-1DD12; Port Orientation - Cover End:1 1/2; Manufacturer Part No.:Flange; Shaft Seal Type:3/16 in; Shaft End RPM [Max:N/A; Pump Series:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Factory price Nachi pump,PVD-2B-32L,PVD-2B-40P,PVD-2B-34L,PVD-2B-36L,PVD-2B-38,PVD-2B-40,PVD-2B-42,PVD-00B-15,PVD-1B,PVD-3B-60Displacement Shaft End (cu in/revolution):30.0 LB; Port Type:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Minor Diameter:V2010-1F9S7S-1DD12; Rotation:1 1/2; Shaft Seal Type:Flange; Relief Valve Setting:3/16 in; Pilot Type:N/A; Shaft Length:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Kobelco SK330-6E hydraulic main pump K3V112DTP 189R-9TBR -V SK200-6ECover End Pressure [Max:30.0 LB; Minor Diameter:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft Seal Type:V2010-1F9S7S-1DD12; Shaft End Pressure [Max:1 1/2; Shaft End RPM [Max:Flange; Cover End RPM [Max:3/16 in; Minor Diameter [Min:N/A; Model No.:0.875 in; Port Size:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Genuine Quality Excavator Spare Parts 205-70-31271 Bushing for Komatsu PC270-7Rotation:30.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Port Orientation - Cover End:V2010-1F9S7S-1DD12; Pump Series:1 1/2; Cover End RPM [Max:Flange; Pressure Port Size, Shaft End:3/16 in; Port Orientation - Shaft End:N/A; Integral Valve Configuration:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
23A-60-11100 Main pump for KOMATSU GD511A-1/ GD521A-1Shaft Type:30.0 LB; Integral Valve Configuration:Flange Mount; Major Diameter [Min:Right Hand (CW); Mounting:V2010-1F9S7S-1DD12; Shaft Key:1 1/2; Port Orientation - Cover End:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Manufacturer Part No.:N/A; Shaft Seal Type:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Excavator transmission gearboxShaft Type:30.0 LB; Minor Diameter:Flange Mount; Port Size:Right Hand (CW); Integral Valve Configuration:V2010-1F9S7S-1DD12; Cover End RPM [Max:1 1/2; Port Orientation - Cover End:Flange; Seal Material:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Mounting:0.875 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Piston hyundai excavator hydraulic pump R210LC-7 K3V112DTPort Orientation - Cover End:30.0 LB; Shaft End Pressure [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Model No.:V2010-1F9S7S-1DD12; Pressure Port Size, Shaft End:1 1/2; Mounting:Flange; Rotation:3/16 in; Spline Description:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
Hot sale For Kawasaki GM35VL excavator swing motor partsPort Type:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Integral Valve Configuration:V2010-1F9S7S-1DD12; Shaft End Pressure [Max:1 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft Dia.:3/16 in; Mounting Flange:N/A; Port Orientation - Shaft End:0.875 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;
PC120-6 swing motor partsDisplacement Shaft End (cu in/revolution):30.0 LB; Shaft End Flow @ RPM:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Controlled Flow Rate:V2010-1F9S7S-1DD12; Shaft Key:1 1/2; Cover End Pressure [Max:Flange; Pressure Port Size, Shaft End:3/16 in; Displacement Cover End (cu in/revolution):N/A; Integral Valve Configuration:0.875 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1DD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81;

 

 

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed PC300LC-7 6D114 diesel injection pump 6743711131 SAA6D114E engine fuel pump PC350-7 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us