• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155

  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155
  • Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155

category

Hydraulic pump and pump parts

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 2400
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2400
  • N/A
  • 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
  • V2010-1F13S4S-11DD12
  • 2500
  • 2200
  • 6
  • 19.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.8
  • 2.59

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 Products and services

 

6D24 fuel injector for SUMITOMO SH350Port Orientation - Cover End:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Size:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F13S4S-11DD12; Pump Series:1 1/2; Controlled Flow Rate:Flange; Spline Description:N/A; Pilot Type:N/A; Shaft Length:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
FD33 fuel injector for HITACHI EX60-1Max. RPM [Max:30.0 LB; Pump Series:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Cover End Pressure [Max:V2010-1F13S4S-11DD12; Spline Description:1 1/2; Mounting:Flange; Shaft End Flow @ RPM:N/A; Port Orientation - Shaft End:N/A; Pressure Port Size, Cover End:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
Hot sale for Hitachi EX3003C turbocharger model RHE7 Part NO. 114400-3340 6SD1T engine turbocharger OEM NO. CIBQ VB730022Shaft Key:30.0 LB; Shaft End Pressure [Max:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Type:V2010-1F13S4S-11DD12; Port Orientation - Cover End:1 1/2; Manufacturer Part No.:Flange; Max. RPM [Max:N/A; Cover End RPM [Max:N/A; Displacement Cover End (cu in/revolution):0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
Factory price EX200-5 6BG1 excavator alternator engine generator 1-81200-4710-0 0-3500-3872Pilot Type:30.0 LB; Rotation:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F13S4S-11DD12; Shaft End RPM [Max:1 1/2; Cover End Flow @ RPM:Flange; Shaft Seal Type:N/A; Shaft Dia.:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
Hydraulic Gear Pump 705-12-32010Shaft Type:30.0 LB; Port Size:Flange Mount; Pilot Type:Right Hand (CW); Pump Series:V2010-1F13S4S-11DD12; Displacement Shaft End (cu in/revolution):1 1/2; Relief Valve Setting:Flange; Displacement Cover End (cu in/revolution):N/A; Integral Valve Configuration:N/A; Seal Material:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
Hydraulic Pump Spare Parts Ball Guide 708-2G-13510 for Komatsu PC160-7Minor Diameter [Min:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Shaft End Pressure [Max:V2010-1F13S4S-11DD12; Shaft Dia.:1 1/2; Shaft Type:Flange; Spline Description:N/A; Minor Diameter [Max:N/A; Cover End RPM [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
4JB1 fuel injector for DOOSAN DH55Displacement Cover End (cu in/revolution):30.0 LB; Mounting Flange:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Relief Valve Setting:V2010-1F13S4S-11DD12; Pilot Type:1 1/2; Rotation:Flange; Major Diameter [Max:N/A; Port Type:N/A; Port Orientation - Cover End:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
6D16 fuel injector for kobelco SK330-6Shaft Length:30.0 LB; Shaft Dia.:Flange Mount; Model No.:Right Hand (CW); Port Size:V2010-1F13S4S-11DD12; Shaft Type:1 1/2; Rotation:Flange; GPM @ 1,800 rpm, Cover End:N/A; Shaft End RPM [Max:N/A; Cover End Pressure [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
Excavator SE210-1 slewing bearing ,slewing ring bearing for HyundaiCover End Pressure [Max:30.0 LB; Shaft Seal Type:Flange Mount; Rotation:Right Hand (CW); Integral Valve Configuration:V2010-1F13S4S-11DD12; Shaft Type:1 1/2; Mounting Flange:Flange; Relief Valve Setting:N/A; Shaft Key:N/A; Shaft End RPM [Max:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;
QSM11-C fuel injector for hyundai R5156LC-9TCover End RPM [Max:30.0 LB; Rotation:Flange Mount; Shaft Dia.:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2010-1F13S4S-11DD12; Shaft End Flow @ RPM:1 1/2; Model No.:Flange; Integral Valve Configuration:N/A; Mounting Flange:N/A; Major Diameter [Min:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S4S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.59;

 

 

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Made in China Engine Cylinder Block 6211-22-1101 for Komatsu Dozer D155 Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us