• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>Excavator Hitach ZX60 slewing bearing ,slewing ring bearing

  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing
  • Excavator Hitach ZX60 slewing bearing ,slewing ring bearing

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing

category

Hydraulic pump and pump parts

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 4535VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm
  • 4535VQ50A35-11AA20-LH
  • 3000
  • 2500
  • 52.5
  • 75
  • w/o Integral Valves
  • Outlet Opposite Inlet
  • Outlet Opposite Inlet
  • 1 1/4 in Flange
  • 1 1/2 in Flange
  • 6.88
  • 9.9

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing Products and services

 

Factory price EX100-3 Exhaust muffler Excavator muffler Construction Machinery Parts SilencerPort Orientation - Cover End:118.0 LB; Shaft Length:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Mounting:4535VQ50A35-11AA20-LH; Port Orientation - Shaft End:4; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Seal Type:N/A; Shaft Type:Standard Pilot; Cover End Pressure [Max:1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Wholesale Price 6240-81-8600 Turbocharger for Komatsu PC200-7 PC300 PC400 PC650 PC750 PC800Cover End Flow @ RPM:118.0 LB; Rotation:Flange Mount; Pilot Type:Left Hand (CCW); Weight:4535VQ50A35-11AA20-LH; Shaft Type:4; Pressure Port Size, Shaft End:Flange; Shaft Dia.:N/A; Minor Diameter [Max:Standard Pilot; Cover End Pressure [Max:1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hydraulic Pump Spare Parts Cylinder Block Vale Plate 708-3T-04210 for Komatsu PC70-8Cover End Flow @ RPM:118.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Type:Left Hand (CCW); Manufacturer Part No.:4535VQ50A35-11AA20-LH; Major Diameter [Max:4; Cover End Pressure [Max:Flange; Rotation:N/A; Pump Series:Standard Pilot; Minor Diameter [Min:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
J08E fuel injector for kobelco SK350-8Relief Valve Setting:118.0 LB; Spline Description:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft Length:4535VQ50A35-11AA20-LH; Weight:4; GPM @ 1,800 rpm, Shaft End:Flange; Shaft End RPM [Max:N/A; Shaft End Pressure [Max:Standard Pilot; Mounting Flange:1.25 in; Port Type:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hydraulic Gear Pump 705-52-30190?Model No.:118.0 LB; Shaft End RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Major Diameter [Max:4535VQ50A35-11AA20-LH; Major Diameter [Min:4; Spline Description:Flange; Seal Material:N/A; Weight:Standard Pilot; Port Orientation - Cover End:1.25 in; Rotation:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hydraulic Pump Spare Parts Cylinder Block Vale Plate 708-2L-06470 for Komatsu PC200-8Manufacturer Part No.:118.0 LB; Pilot Type:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Shaft End RPM [Max:4535VQ50A35-11AA20-LH; Mounting Flange:4; Port Orientation - Shaft End:Flange; Spline Description:N/A; Relief Valve Setting:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Excavator Hitach EX200-5 slewing bearing ,slewing ring bearingCover End Flow @ RPM:118.0 LB; Port Size:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Pilot Type:4535VQ50A35-11AA20-LH; Weight:4; Shaft End Pressure [Max:Flange; Cover End RPM [Max:N/A; Mounting Flange:Standard Pilot; Minor Diameter [Max:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Factory Price Lift/dump pump 705-22-36060 For Komatsu WA450-1-AMajor Diameter [Max:118.0 LB; Cover End Pressure [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Cover End RPM [Max:4535VQ50A35-11AA20-LH; Port Size:4; Relief Valve Setting:Flange; Minor Diameter [Min:N/A; Max. RPM [Max:Standard Pilot; Spline Description:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
S4D95L-1 fuel injector for KOMATSU PC120-5Rotation:118.0 LB; Port Orientation - Cover End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Cover End Flow @ RPM:4535VQ50A35-11AA20-LH; Port Orientation - Shaft End:4; Minor Diameter:Flange; Shaft Dia.:N/A; Shaft Length:Standard Pilot; Mounting Flange:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hydraulic Gear Pump 705-52-22100Shaft Key:118.0 LB; Pump Series:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Max. RPM [Max:4535VQ50A35-11AA20-LH; Shaft End RPM [Max:4; Mounting Flange:Flange; Cover End Flow @ RPM:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Spline Description:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;

 

 

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Excavator Hitach ZX60 slewing bearing ,slewing ring bearing Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Excavator Hitach ZX60 slewing bearing ,slewing ring bearing Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us