• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>4JB1 fuel injector for SUMITOMO SH60

  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60
  • 4JB1 fuel injector for SUMITOMO SH60

4JB1 fuel injector for SUMITOMO SH60 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4JB1 fuel injector for SUMITOMO SH60

category

Hydraulic pump and pump parts

4JB1 fuel injector for SUMITOMO SH60 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4JB1 fuel injector for SUMITOMO SH60 Technical information

  • Standard Pilot
  • 1.25 in
  • 5.9
  • 3520V
  • 2 7/8 in
  • Double
  • Buna-N
  • 1800
  • Outlet 90° CW from Inlet
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 1.1
  • Motor
  • 1800
  • 1800
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3520V30A5-1DD22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 3000
  • 2500
  • 3/4 in Code 61
  • 1 1/4 in Code 61
  • 135° CW From Inlet Port
  • N/A
  • Outlet 135° CW from Inlet

4JB1 fuel injector for SUMITOMO SH60 Products and services

 

Factory price D6H Exhaust muffler Excavator muffler Construction Machinery Parts SilencerShaft Key:75.0 LB; Major Diameter [Min:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Max. RPM [Max:3520V30A5-1DD22R; Seal Material:3; Pressure Port Size, Cover End:Flange; Controlled Flow Rate:5/16 in; Minor Diameter:22; Model No.:Standard Pilot; Shaft Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Hot Sale Engine Cylinder Head 8N1187 for CATERPILLAR 3306PCCover End Flow @ RPM:75.0 LB; Rotation:Flange Mount; Minor Diameter:Right Hand (CW); Major Diameter [Max:3520V30A5-1DD22R; Pressure Port Size, Cover End:3; Controlled Flow Rate:Flange; Cover End RPM [Max:5/16 in; Shaft Length:22; Displacement Cover End (cu in/revolution):Standard Pilot; Port Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Hydraulic Gear Pump 705-21-26050Shaft End Pressure [Max:75.0 LB; Mounting:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Integral Valve Configuration:3520V30A5-1DD22R; Pilot Type:3; Manufacturer Part No.:Flange; Spline Description:5/16 in; Displacement Cover End (cu in/revolution):22; Major Diameter [Min:Standard Pilot; Controlled Flow Rate:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Hydraulic Gear Pump 705-55-33100Minor Diameter:75.0 LB; Shaft End RPM [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Displacement Shaft End (cu in/revolution):3520V30A5-1DD22R; Mounting Flange:3; Spline Description:Flange; Pressure Port Size, Shaft End:5/16 in; Cover End RPM [Max:22; Major Diameter [Max:Standard Pilot; Cover End Flow @ RPM:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Wholesale Price 6743-81-8040 Turbocharger for Komatsu PC200-7 PC300 PC400 PC650 PC750 PC800GPM @ 1,800 rpm, Cover End:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Key:Right Hand (CW); Port Orientation - Shaft End:3520V30A5-1DD22R; Shaft Type:3; Major Diameter [Max:Flange; Displacement Cover End (cu in/revolution):5/16 in; Displacement Shaft End (cu in/revolution):22; Shaft Dia.:Standard Pilot; Relief Valve Setting:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Wholesale Price 6505-52-5410 Turbocharger for Komatsu PC200-7 PC300 PC400 PC650 PC750 PC800Integral Valve Configuration:75.0 LB; Shaft Key:Flange Mount; Major Diameter [Min:Right Hand (CW); Controlled Flow Rate:3520V30A5-1DD22R; Displacement Shaft End (cu in/revolution):3; Cover End RPM [Max:Flange; Minor Diameter [Max:5/16 in; Shaft Type:22; Port Orientation - Cover End:Standard Pilot; Model No.:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
engine parts 4D95 con rod bearing camshaftModel No.:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Type:Right Hand (CW); Shaft End Pressure [Max:3520V30A5-1DD22R; Shaft Dia.:3; Mounting Flange:Flange; Shaft Seal Type:5/16 in; Controlled Flow Rate:22; Mounting:Standard Pilot; Pump Series:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
hydraulic pump parts for Sauer PV90R100Port Orientation - Shaft End:75.0 LB; Shaft Seal Type:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Integral Valve Configuration:3520V30A5-1DD22R; Controlled Flow Rate:3; Cover End Flow @ RPM:Flange; Minor Diameter [Min:5/16 in; Weight:22; Pressure Port Size, Cover End:Standard Pilot; Cover End RPM [Max:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
excavator hydraulic swing motor parts for Kawasaki M5X180 SK350-8Shaft Type:75.0 LB; Cover End RPM [Max:Flange Mount; Pump Series:Right Hand (CW); Controlled Flow Rate:3520V30A5-1DD22R; Displacement Cover End (cu in/revolution):3; Cover End Pressure [Max:Flange; Pressure Port Size, Cover End:5/16 in; Mounting:22; Relief Valve Setting:Standard Pilot; Shaft Length:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;
Hot sale For Hyundai XD300 300-5 turbocharger model HX40 Part NO. 3802651 turbochargerPort Orientation - Shaft End:75.0 LB; Rotation:Flange Mount; Max. RPM [Max:Right Hand (CW); Pressure Port Size, Cover End:3520V30A5-1DD22R; Shaft End Flow @ RPM:3; Pressure Port Size, Shaft End:Flange; Minor Diameter:5/16 in; Mounting:22; Pilot Type:Standard Pilot; Spline Description:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520V30A5-1DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:45; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):5.9;

 

 

4JB1 fuel injector for SUMITOMO SH60 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4JB1 fuel injector for SUMITOMO SH60 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4JB1 fuel injector for SUMITOMO SH60 Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us