• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7

  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7
  • High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7

category

Hydraulic pump and pump parts

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 Technical information

  • 0.875 in
  • Straight w/ Key
  • V2010
  • 2.3125 in
  • Double
  • Buna-N
  • 2800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 3000
  • 2800
  • N/A
  • 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • V2010-1F8S2S-1DB12-LH
  • 2500
  • 2500
  • 3
  • 12
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.4

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 Products and services

 

Hot sale Cart 320B turbocharger model TD06 Part NO. 5I8018 3066T engine turbocharger OEM NO. 49179-02300Major Diameter [Max:30.0 LB; Shaft Dia.:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Major Diameter [Min:V2010-1F8S2S-1DB12-LH; Shaft Length:1.5; Max. RPM [Max:Flange; Shaft End Pressure [Max:3/16 in; Pressure Port Size, Shaft End:N/A; Port Size:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Wholesale Price 6505-52-5510 Turbocharger for Komatsu PC200-7 PC300 PC400 PC650 PC750 PC800Port Type:30.0 LB; Cover End Pressure [Max:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Relief Valve Setting:V2010-1F8S2S-1DB12-LH; Pressure Port Size, Shaft End:1.5; Port Orientation - Cover End:Flange; Pressure Port Size, Cover End:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Seal Type:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Hydraulic Gear Pump 705-24-30010Shaft Dia.:30.0 LB; Shaft Key:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Mounting:V2010-1F8S2S-1DB12-LH; Major Diameter [Min:1.5; Max. RPM [Max:Flange; Shaft Length:3/16 in; Shaft End RPM [Max:N/A; Cover End Pressure [Max:0.875 in; Pilot Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
D6DEAE2 fuel injector for VOLVO EC210BMounting:30.0 LB; Shaft Type:Flange Mount; Mounting Flange:Left Hand (CCW); Rotation:V2010-1F8S2S-1DB12-LH; Integral Valve Configuration:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Port Orientation - Shaft End:3/16 in; Controlled Flow Rate:N/A; Port Type:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Hot Sale Engine Cylinder Head 7N0848 for CATERPILLAR 3412Cover End RPM [Max:30.0 LB; Minor Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft Length:V2010-1F8S2S-1DB12-LH; Shaft Dia.:1.5; Mounting:Flange; Major Diameter [Max:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Mounting Flange:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Excavator Sumitomo SH120-3 slewing bearing ,slewing ring bearingPort Type:30.0 LB; Pilot Type:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Displacement Shaft End (cu in/revolution):V2010-1F8S2S-1DB12-LH; Major Diameter [Max:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Spline Description:3/16 in; Major Diameter [Min:N/A; Shaft End Flow @ RPM:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Hydraulic Gear Pump 705-52-30080Pressure Port Size, Shaft End:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Relief Valve Setting:Left Hand (CCW); Port Orientation - Shaft End:V2010-1F8S2S-1DB12-LH; Pressure Port Size, Cover End:1.5; Displacement Shaft End (cu in/revolution):Flange; Shaft Seal Type:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Shaft Type:0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
6HK1 fuel injector for SUMITOMO SH350-5Integral Valve Configuration:30.0 LB; Shaft End Pressure [Max:Flange Mount; Port Size:Left Hand (CCW); Displacement Cover End (cu in/revolution):V2010-1F8S2S-1DB12-LH; GPM @ 1,800 rpm, Cover End:1.5; Shaft End RPM [Max:Flange; Port Orientation - Shaft End:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Shaft Key:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Hydraulic Pump Spare Parts Valve Plate 708-3S-13490 for Komatsu PC56-7Pressure Port Size, Shaft End:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Rotation:Left Hand (CCW); Cover End Flow @ RPM:V2010-1F8S2S-1DB12-LH; Pilot Type:1.5; Minor Diameter:Flange; Major Diameter [Min:3/16 in; Pump Series:N/A; Model No.:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;
Excavator Kobelco SK135 slewing bearing ,slewing ring bearingShaft Dia.:30.0 LB; Shaft End RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Cover End Flow @ RPM:V2010-1F8S2S-1DB12-LH; Major Diameter [Max:1.5; Mounting Flange:Flange; Shaft Length:3/16 in; Pump Series:N/A; Major Diameter [Min:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S2S-1DB12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.6;

 

 

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC400-7 PC450-7 Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us