Home>Products>DANSION vane pump>Dansion vane pump T6DP-031-3R03
Dansion vane pump T6DP-031-3R03
category
DANSION vane pump
Dansion vane pump T6DP-031-3R03 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Dansion vane pump T6DP-031-3R03 Systems
- 0.875 in
- Straight w/ Key
- V2010
- 2.3125 in
- Buna-N
- 3000
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 3000
- 3000
- N/A
- 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- V2010-2F7S2S-1CC12
- 2500
- 2500
- 3
- 10.5
- N/A
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.4
- 1.39
Dansion vane pump T6DP-031-3R03 Dimensions
Dansion vane pump T6DP-B35-3L00 | Minor Diameter [Max:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Seal Material:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-2F7S2S-1CC12; Max. RPM [Max:1 1/2; Relief Valve Setting:Flange; Minor Diameter [Min:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Shaft Key:0.875 in; Shaft Dia.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-038-3R03 | Weight:30.0 LB; Mounting Flange:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Cover End RPM [Max:V2010-2F7S2S-1CC12; Pressure Port Size, Cover End:1 1/2; Pilot Type:Flange; Shaft Dia.:3/16 in; Minor Diameter [Min:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-014-3L00 | Major Diameter [Max:30.0 LB; Mounting:Flange Mount; Port Type:Right Hand (CW); Pilot Type:V2010-2F7S2S-1CC12; Shaft Type:1 1/2; Spline Description:Flange; Shaft End Pressure [Max:3/16 in; Minor Diameter [Max:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-017-3R00 | Cover End RPM [Max:30.0 LB; Minor Diameter:Flange Mount; Shaft Type:Right Hand (CW); Pump Series:V2010-2F7S2S-1CC12; Port Orientation - Shaft End:1 1/2; Shaft Key:Flange; Pressure Port Size, Cover End:3/16 in; Max. RPM [Max:N/A; Pressure Port Size, Shaft End:0.875 in; Shaft Length:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-031-3L03 | Shaft Length:30.0 LB; Integral Valve Configuration:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Shaft End Flow @ RPM:V2010-2F7S2S-1CC12; Shaft Key:1 1/2; Manufacturer Part No.:Flange; Port Type:3/16 in; Controlled Flow Rate:N/A; Cover End Pressure [Max:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-B14-3L01 | Model No.:30.0 LB; Major Diameter [Min:Flange Mount; Major Diameter [Max:Right Hand (CW); Minor Diameter [Min:V2010-2F7S2S-1CC12; Weight:1 1/2; Cover End Pressure [Max:Flange; Controlled Flow Rate:3/16 in; Shaft Key:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-B14-3L03 | Displacement Cover End (cu in/revolution):30.0 LB; Port Type:Flange Mount; Minor Diameter [Min:Right Hand (CW); Major Diameter [Max:V2010-2F7S2S-1CC12; Cover End RPM [Max:1 1/2; Shaft End Pressure [Max:Flange; Shaft Dia.:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Cover End Flow @ RPM:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-038-3L03 | GPM @ 1,800 rpm, Shaft End:30.0 LB; Pilot Type:Flange Mount; Shaft Dia.:Right Hand (CW); Shaft End RPM [Max:V2010-2F7S2S-1CC12; Seal Material:1 1/2; Displacement Cover End (cu in/revolution):Flange; Cover End Pressure [Max:3/16 in; Pressure Port Size, Cover End:N/A; Manufacturer Part No.:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-031-3R00 | Shaft Length:30.0 LB; Model No.:Flange Mount; Max. RPM [Max:Right Hand (CW); Cover End RPM [Max:V2010-2F7S2S-1CC12; Shaft Dia.:1 1/2; Shaft Type:Flange; Rotation:3/16 in; Cover End Pressure [Max:N/A; Manufacturer Part No.:0.875 in; Port Size:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-020-3L02 | GPM @ 1,800 rpm, Cover End:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Manufacturer Part No.:Right Hand (CW); Rotation:V2010-2F7S2S-1CC12; Weight:1 1/2; Displacement Shaft End (cu in/revolution):Flange; Spline Description:3/16 in; Pressure Port Size, Shaft End:N/A; Major Diameter [Min:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
Dansion vane pump T6DP-031-3R03 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Dansion vane pump T6DP-031-3R03 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
DANSION vane pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump