Home>Products>Dansion goldcup series pump>Dansion P11P-7R1E-9A4-A00-0A0
Dansion P11P-7R1E-9A4-A00-0A0
category
Dansion goldcup series pump
Dansion P11P-7R1E-9A4-A00-0A0 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Dansion P11P-7R1E-9A4-A00-0A0 Systems
- 1.25 in
- 14 Tooth Splined
- 3525VQ
- 1.9375 in
- Double
- Buna-N
- 2500
- 1.04 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 2500
- 2500
- N/A
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- 1.248 in
- 1.247 in
- N/A
- N/A
- 5
- 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
- 3525VQ25A21-11CC20-LH
- 3000
- 3000
- 31.5
- 37.5
- w/o Integral Valves
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 1 in Flange
- 1 1/4 in Flange
- 4.1
Dansion P11P-7R1E-9A4-A00-0A0 Dimensions
Dansion P11R-2R5E-9A8-B0X-D0 | Major Diameter [Min:76.0 LB; Cover End Flow @ RPM:Flange Mount; Shaft Key:Left Hand (CCW); Cover End Pressure [Max:3525VQ25A21-11CC20-LH; GPM @ 1,800 rpm, Cover End:3; Mounting Flange:Flange; Weight:N/A; Shaft Seal Type:Standard Pilot; Shaft End Pressure [Max:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P8R-4L1E-9A6-B0X-A0 | Seal Material:76.0 LB; Port Type:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Cover End Flow @ RPM:3525VQ25A21-11CC20-LH; Minor Diameter [Max:3; Max. RPM [Max:Flange; Manufacturer Part No.:N/A; Shaft End RPM [Max:Standard Pilot; Shaft Length:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P11S-8R1E-9A7-B00-A1 | Port Orientation - Shaft End:76.0 LB; Port Type:Flange Mount; Shaft Type:Left Hand (CCW); Mounting Flange:3525VQ25A21-11CC20-LH; Pressure Port Size, Cover End:3; Shaft Dia.:Flange; Shaft End Pressure [Max:N/A; Rotation:Standard Pilot; Shaft Length:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P11P-7L1E-9A8-A00-0A0 | Port Orientation - Cover End:76.0 LB; Seal Material:Flange Mount; Shaft Length:Left Hand (CCW); Shaft End Pressure [Max:3525VQ25A21-11CC20-LH; Manufacturer Part No.:3; Weight:Flange; Shaft Type:N/A; Cover End Flow @ RPM:Standard Pilot; Pilot Type:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P7P-5L1E-9A8-A00-0B0 | Displacement Shaft End (cu in/revolution):76.0 LB; Shaft Type:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Shaft Key:3525VQ25A21-11CC20-LH; Shaft Seal Type:3; Max. RPM [Max:Flange; Minor Diameter [Max:N/A; Port Type:Standard Pilot; Major Diameter [Max:1.25 in; Weight:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P14P-3L5E-9A4-A00-0A0 | Shaft End Flow @ RPM:76.0 LB; Spline Description:Flange Mount; Shaft Type:Left Hand (CCW); Cover End Flow @ RPM:3525VQ25A21-11CC20-LH; Weight:3; GPM @ 1,800 rpm, Shaft End:Flange; GPM @ 1,800 rpm, Cover End:N/A; Pump Series:Standard Pilot; Mounting Flange:1.25 in; Cover End Pressure [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P7R-4L1E-9A4-B0X-A0 | Cover End Pressure [Max:76.0 LB; Relief Valve Setting:Flange Mount; Mounting:Left Hand (CCW); Weight:3525VQ25A21-11CC20-LH; Port Type:3; Major Diameter [Max:Flange; Pressure Port Size, Cover End:N/A; Seal Material:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P8P-8L1E-9A4-B00-0B0 | Major Diameter [Min:76.0 LB; Mounting:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Minor Diameter [Min:3525VQ25A21-11CC20-LH; Mounting Flange:3; Port Orientation - Shaft End:Flange; Pump Series:N/A; Shaft Seal Type:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P7R-4L1E-9A6-B0X-A0 | Port Size:76.0 LB; Shaft End Pressure [Max:Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Dia.:3525VQ25A21-11CC20-LH; Pilot Type:3; Max. RPM [Max:Flange; Pressure Port Size, Shaft End:N/A; Mounting Flange:Standard Pilot; Manufacturer Part No.:1.25 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P11P-7L1E-9A4-A00-0A0 | Pilot Type:76.0 LB; Cover End RPM [Max:Flange Mount; Max. RPM [Max:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11CC20-LH; Mounting:3; Shaft End RPM [Max:Flange; Shaft Type:N/A; Shaft End Pressure [Max:Standard Pilot; Shaft Seal Type:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5; |
Dansion P11P-7R1E-9A4-A00-0A0 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Dansion P11P-7R1E-9A4-A00-0A0 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Dansion goldcup series pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump