• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING

  • PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING
  • PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING

category

Tokimec Vane Pump

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING Systems

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1.9375 in
  • Double
  • Buna-N
  • 2400
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 7.4
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm
  • 3525VQ38A21-11AA20-LH
  • 3000
  • 3000
  • 31.5
  • 57
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.1

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING Dimensions

 

Rexroth A11VG50 RETAINER PLATE A11VG50 BALL GUIDE A11VG50 DRIVE SHAFT A11VG50 SWASH PLATEWeight:76.0 LB; Port Size:Flange Mount; Seal Material:Left Hand (CCW); Model No.:3525VQ38A21-11AA20-LH; Minor Diameter [Min:3; Mounting Flange:Flange; Shaft End Flow @ RPM:N/A; Shaft Key:Standard Pilot; Port Orientation - Cover End:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
Rexroth A2FM10 RING PISTON A2FM10 RING A2FM10 CYLINDER BLOCK A2FM10 VALVE PLATE M A2FM10 CENTER PINRelief Valve Setting:76.0 LB; Port Orientation - Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Mounting Flange:3525VQ38A21-11AA20-LH; Shaft Dia.:3; Major Diameter [Max:Flange; Shaft Seal Type:N/A; Model No.:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Port Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
Rexroth A7VO55 SPRING SEAT A7VO55 SHAFT OIL SEAL A7VO55 SEAL KIT A7VO55Integral Valve Configuration:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Cover End Flow @ RPM:3525VQ38A21-11AA20-LH; Pump Series:3; Max. RPM [Max:Flange; Shaft End RPM [Max:N/A; Model No.:Standard Pilot; Cover End RPM [Max:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
PV90R042 PISTON SHOE PV90R042 CYLINDER BLOCK PV90R042 VALVE PLATE PV90R042 RETAINER PLATE PV90R042 SHOE PLATEMax. RPM [Max:76.0 LB; Cover End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Minor Diameter [Max:3525VQ38A21-11AA20-LH; Pressure Port Size, Shaft End:3; Controlled Flow Rate:Flange; Mounting:N/A; Rotation:Standard Pilot; Weight:1.25 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
SAUER MPT044 BALL GUIDE MPT044 BARREL WASHER MPT044 PRESS PIN MPT044 COIL SPRINGControlled Flow Rate:76.0 LB; Major Diameter [Min:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Model No.:3525VQ38A21-11AA20-LH; Port Orientation - Cover End:3; Mounting Flange:Flange; Shaft Key:N/A; Cover End RPM [Max:Standard Pilot; Manufacturer Part No.:1.25 in; Weight:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
Rexroth A2F28 PISTON A2F28 CYLINDER BLOCK A2F28 VALVE PLATE A2F28 RETAINER PLATE A2F28 DRIVE SHAFTShaft Dia.:76.0 LB; Shaft End Pressure [Max:Flange Mount; Rotation:Left Hand (CCW); Port Size:3525VQ38A21-11AA20-LH; Spline Description:3; Weight:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Mounting Flange:Standard Pilot; Shaft Type:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
Rexroth A4V90 PISTON SHOE A4V90 CYLINDER BLOCK A4V90 VALVE PLATEMinor Diameter:76.0 LB; Pilot Type:Flange Mount; Shaft Seal Type:Left Hand (CCW); Pressure Port Size, Cover End:3525VQ38A21-11AA20-LH; GPM @ 1,800 rpm, Shaft End:3; Max. RPM [Max:Flange; Shaft End RPM [Max:N/A; Cover End RPM [Max:Standard Pilot; Major Diameter [Max:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
EATON 4621 PISTON SHOE 4621 CYLINDER BLOCK 4621 VALVE PLATE 4621 RETAINER PLATEIntegral Valve Configuration:76.0 LB; Seal Material:Flange Mount; Major Diameter [Max:Left Hand (CCW); Model No.:3525VQ38A21-11AA20-LH; Minor Diameter:3; Shaft Length:Flange; GPM @ 1,800 rpm, Cover End:N/A; Port Size:Standard Pilot; Max. RPM [Max:1.25 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
Linde HPR135 ball guide HPR135 swash plate HPR135 support HPR135 metal HPR135 drive shaftDisplacement Cover End (cu in/revolution):76.0 LB; Pilot Type:Flange Mount; Seal Material:Left Hand (CCW); Model No.:3525VQ38A21-11AA20-LH; Weight:3; Port Orientation - Shaft End:Flange; Shaft Key:N/A; Shaft Length:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Pump Series:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;
SAUER MMFO25C DRIVE SHAFT MMFO25C SHOE PLATE MMFO25C RETAINER PLATECover End Pressure [Max:76.0 LB; Mounting:Flange Mount; Shaft Length:Left Hand (CCW); Shaft End Flow @ RPM:3525VQ38A21-11AA20-LH; Minor Diameter [Max:3; Shaft Type:Flange; Max. RPM [Max:N/A; Controlled Flow Rate:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ38A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:57; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):7.4;

 

 

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed PC200-7 SUPPORT PC200-7 YOKE ASSY PC200-7 PRESS PIN PC200-7 COIL SPRING PC200-7 SNAP RING Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us