• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95

  • HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95
  • HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95

category

Tokimec Vane Pump

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 2400
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2800
  • 2400
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
  • V2010-1F13S7S-11AD12
  • 2000
  • 2200
  • 10.5
  • 19.5
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet Opposite Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.39
  • 2.59

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 Dimensions

 

Rexroth A6VE160 RING PISTON A6VM160 CYLINDER BLOCK A6VM160 VALVE PLATE M A6VM160 RETAINER PLATESpline Description:30.0 LB; Mounting Flange:Flange Mount; Weight:Right Hand (CW); Pilot Type:V2010-1F13S7S-11AD12; Major Diameter [Min:1 1/2; Max. RPM [Max:Flange; Pump Series:N/A; Port Orientation - Shaft End:N/A; Shaft Key:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A7VO250 RING PISTON A7VO250 CYLINDER BLOCK A7VO250 VALVE PLATE A7VO250 RETAINER PLATEShaft Length:30.0 LB; Mounting:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft Key:V2010-1F13S7S-11AD12; Integral Valve Configuration:1 1/2; Cover End RPM [Max:Flange; Controlled Flow Rate:N/A; Mounting Flange:N/A; Port Type:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A2F55 PISTON A2F55 CYLINDER BLOCK A2F55 VALVE PLATE A2F55 RETAINER PLATE A2F55 DRIVE SHAFTPort Size:30.0 LB; Minor Diameter [Max:Flange Mount; Minor Diameter:Right Hand (CW); Controlled Flow Rate:V2010-1F13S7S-11AD12; Shaft End Flow @ RPM:1 1/2; Cover End RPM [Max:Flange; Mounting Flange:N/A; Rotation:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A2FE200 RING PISTON A2FE200 RING A2FE200 CYLINDER BLOCK A2FE200 VALVE PLATE A2FE200 DRIVE SHAFTModel No.:30.0 LB; Integral Valve Configuration:Flange Mount; Port Size:Right Hand (CW); Pilot Type:V2010-1F13S7S-11AD12; Shaft Key:1 1/2; Mounting:Flange; Controlled Flow Rate:N/A; Rotation:N/A; Weight:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A8V107 PISTON A8V107 CYLINDER BLOCK A8V107 VALVE PLATE A8V107 RETAINER PLATE A8V107 DRIVE SHAFT A8V107 CENTER PINSeal Material:30.0 LB; Model No.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Cover End RPM [Max:V2010-1F13S7S-11AD12; Shaft Seal Type:1 1/2; Relief Valve Setting:Flange; Shaft Dia.:N/A; Pressure Port Size, Shaft End:N/A; Cover End Flow @ RPM:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Hitachi ZX270 CENTER PIN ZX270 HEAD BLOCK ZX270 BACK COVER Hitachi ZX270Shaft Length:30.0 LB; Minor Diameter:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Cover End RPM [Max:V2010-1F13S7S-11AD12; Shaft End RPM [Max:1 1/2; Controlled Flow Rate:Flange; Major Diameter [Min:N/A; Seal Material:N/A; Integral Valve Configuration:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A11VO145 SADDLE BEARING A11VO145 BEARING SEAT A11VO145 SHAFT OIL SEALShaft End Pressure [Max:30.0 LB; Cover End Flow @ RPM:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F13S7S-11AD12; Displacement Cover End (cu in/revolution):1 1/2; Pilot Type:Flange; Rotation:N/A; Cover End Pressure [Max:N/A; Minor Diameter [Min:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
SAUER MF21 HYDRAULIC PISTON MOTOR REPAIR PARTS MF21 SHAFT OIL SEAL ASSY MF21 HYDRAULIC MOTOR SEAL KITMinor Diameter [Max:30.0 LB; Controlled Flow Rate:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Cover End Flow @ RPM:V2010-1F13S7S-11AD12; Port Orientation - Cover End:1 1/2; Minor Diameter [Min:Flange; Shaft End Pressure [Max:N/A; Pressure Port Size, Shaft End:N/A; Shaft Key:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
EATON 78462 BEARING PLATE 78462 SHOE PLATE 78462 DRIVE SHAFT 78462 BEARING BUSH 78462 RETAINERMajor Diameter [Min:30.0 LB; Rotation:Flange Mount; Mounting Flange:Right Hand (CW); Mounting:V2010-1F13S7S-11AD12; Port Size:1 1/2; Pump Series:Flange; Minor Diameter:N/A; Model No.:N/A; Shaft End Flow @ RPM:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;
EATON 5421 HYDRAULIC PUMP REPAIR PARTS 5421 SEAL KIT 5421 SMALL SPRING 5421 CHARGE PUMPPort Orientation - Cover End:30.0 LB; Minor Diameter [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Cover End Pressure [Max:V2010-1F13S7S-11AD12; Shaft End Pressure [Max:1 1/2; Cover End Flow @ RPM:Flange; Shaft Type:N/A; Relief Valve Setting:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11AD12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59;

 

 

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed HPV95 SWASH PLATE HPV95 SUPPORT HPV95 YOKE ASSY HPV95 PRESS PIN HPV95 COIL SPRING HPV95 Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us