• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80

  • Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80
  • Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80

category

Tokimec Vane Pump

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 Systems

  • 0.875 in
  • Straight w/ Key
  • 2520VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2700
  • 2500
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17A12-1DC20
  • 2300
  • 3000
  • 18
  • 25.5
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.41
  • 3.37

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 Dimensions

 

SAUER PV90L30 DRIVE SHAFT PV90L30 CAM ROCKER PV90L30 SPRING OF BARREL PV90L30 RETAINER PV90L30 SHAFT OIL SEALMajor Diameter [Min:45.0 LB; Port Type:Flange Mount; Seal Material:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQ17A12-1DC20; Pump Series:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Minor Diameter:3/16 in; Major Diameter [Max:Standard Pilot; Rotation:0.875 in; Weight:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
Rexroth A6VM1000 DRIVE SHAFT A6VM1000 CENTER PIN A6VM1000 METARIS A6VM1000 HEAD BLOCKWeight:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Shaft Length:Right Hand (CW); Cover End Flow @ RPM:2520VQ17A12-1DC20; Minor Diameter [Min:2 1/2; Model No.:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Port Type:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
SAUER PV23 HYDRAULIC PISTON PUMP REPAIR PARTS PV23 SHAFT OIL SEAL ASSY PV23 HYDRAULIC PUMP SEAL KITIntegral Valve Configuration:45.0 LB; Manufacturer Part No.:Flange Mount; Port Type:Right Hand (CW); Port Orientation - Cover End:2520VQ17A12-1DC20; Port Orientation - Shaft End:2 1/2; Spline Description:Flange; Minor Diameter [Min:3/16 in; Model No.:Standard Pilot; Max. RPM [Max:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
Rexroth A2FM500 RING PISTON A2FM500 RING A2FM500 CYLINDER BLOCK A2FM500 VALVE PLATE M A2FM500 DRIVE SHAFTDisplacement Cover End (cu in/revolution):45.0 LB; Controlled Flow Rate:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Cover End Flow @ RPM:2520VQ17A12-1DC20; Shaft Seal Type:2 1/2; Pilot Type:Flange; Rotation:3/16 in; Port Orientation - Cover End:Standard Pilot; Cover End RPM [Max:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
Vickers MFE15 valve plate MFE15 shoe plate MFE15 drive shaft MFE15 housing MFE15Pressure Port Size, Cover End:45.0 LB; Port Size:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Relief Valve Setting:2520VQ17A12-1DC20; GPM @ 1,800 rpm, Cover End:2 1/2; Shaft Dia.:Flange; Major Diameter [Min:3/16 in; Shaft Length:Standard Pilot; Seal Material:0.875 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
HITACHI EX300-2 ROD EX300-2 SNAG RING EX300-2 PILOT PUMP HPV145 HYDRAULIC PUMP REPAIR PARTSSeal Material:45.0 LB; Cover End RPM [Max:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Model No.:2520VQ17A12-1DC20; Pilot Type:2 1/2; Major Diameter [Min:Flange; Displacement Cover End (cu in/revolution):3/16 in; Shaft Key:Standard Pilot; Shaft Type:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
HPV95 SNAP RING HPV95 BARREL WASHER HPV95 DISK SPRING HPV95 SEAL KIT HPV95 GEAR PUMP HPV95Spline Description:45.0 LB; Minor Diameter [Min:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Relief Valve Setting:2520VQ17A12-1DC20; Seal Material:2 1/2; Mounting:Flange; Cover End Flow @ RPM:3/16 in; Mounting Flange:Standard Pilot; Shaft Length:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
Rexroth A11V250 BARREL WASHER A11V250 SEAL OIL A11V250 BIG BEARING A11V250 SMALL BEARINGShaft End Pressure [Max:45.0 LB; Cover End RPM [Max:Flange Mount; Seal Material:Right Hand (CW); Cover End Flow @ RPM:2520VQ17A12-1DC20; Major Diameter [Min:2 1/2; Shaft End RPM [Max:Flange; Mounting:3/16 in; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft Seal Type:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
Rexroth A2FO80 RING PISTON A2FO80 RING A2FO80 CYLINDER BLOCK A2FO80 VALVE PLATE A2FO80 DRIVE SHAFTDisplacement Cover End (cu in/revolution):45.0 LB; Shaft Length:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Integral Valve Configuration:2520VQ17A12-1DC20; Major Diameter [Max:2 1/2; Minor Diameter [Min:Flange; Controlled Flow Rate:3/16 in; Shaft End Flow @ RPM:Standard Pilot; Port Orientation - Shaft End:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;
HPV140 BALL GUIDE HPV140 DRIVE SHAFT HPV140 SWASH PLATE HPV140 SUPPORT HPV140Major Diameter [Min:45.0 LB; Model No.:Flange Mount; Minor Diameter [Min:Right Hand (CW); Max. RPM [Max:2520VQ17A12-1DC20; Shaft End RPM [Max:2 1/2; Major Diameter [Max:Flange; Cover End Flow @ RPM:3/16 in; Weight:Standard Pilot; Pressure Port Size, Cover End:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A12-1DC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):3.37;

 

 

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Rexroth A7VO80 SPRING SEAT A7VO80 SHAFT OIL SEAL A7VO80 SEAL KIT A7VO80 Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us