• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET

  • HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET
  • HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET

category

Tokimec Vane Pump

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET Systems

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1 15/16 in
  • Buna-N
  • 2400
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2400
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 3525VQ35A21-11BB20
  • 3000
  • 3000
  • 31.5
  • 52.5
  • w/o Integral Valves
  • Outlet 45° CCW from Inlet
  • Outlet 90° CCW from Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.12
  • 6.88

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET Dimensions

 

HPV160 PC300-3 PC300-5 PC400-3 PC400-5 EXCAVATOR HYDRAULIC MAIN PUMP REPAIR PARTSSpline Description:76.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft End Pressure [Max:3525VQ35A21-11BB20; Seal Material:3; Controlled Flow Rate:Flange; Mounting:N/A; Port Orientation - Cover End:Standard Pilot; Model No.:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
SAUER 90M075 BEARING SEAT 90M075 METAL 90M075 BARREL WASHER 90M075 SCREW 90M075 SNAP RING 90M075 SEAL OIL 90M042Controlled Flow Rate:76.0 LB; Port Size:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Manufacturer Part No.:3525VQ35A21-11BB20; Shaft End Flow @ RPM:3; Shaft Length:Flange; Displacement Shaft End (cu in/revolution):N/A; Seal Material:Standard Pilot; Shaft Seal Type:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
HPV132 PC300-7 BALL GUIDE PC300-7 DRIVE SHAFT PC300-7 SWASH PLATE PC300-7 SUPPORT HPV132Port Size:76.0 LB; Shaft Dia.:Flange Mount; Seal Material:Right Hand (CW); Port Orientation - Cover End:3525VQ35A21-11BB20; Manufacturer Part No.:3; Major Diameter [Max:Flange; GPM @ 1,800 rpm, Cover End:N/A; Mounting Flange:Standard Pilot; Spline Description:1.25 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
Rexoth A10VG28 PISTON SHOE A10VG28 CYLINDER BLOCK A10VG28 VALVE PLATE A10VG28 RETAINER PLATEShaft Key:76.0 LB; Minor Diameter [Min:Flange Mount; Major Diameter [Min:Right Hand (CW); Port Size:3525VQ35A21-11BB20; Pressure Port Size, Cover End:3; Displacement Cover End (cu in/revolution):Flange; Mounting Flange:N/A; Shaft Length:Standard Pilot; Shaft End RPM [Max:1.25 in; Seal Material:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
SAUER SPV20 BEARING PLATE SPV20 DRIVE SHAFT SPV20 SWASH PLATE SPV20 SHAFT SEAL SPV20 CHARGE PUMP SPV20 CONTROL VALVEPilot Type:76.0 LB; Manufacturer Part No.:Flange Mount; Cover End RPM [Max:Right Hand (CW); Spline Description:3525VQ35A21-11BB20; Mounting:3; Weight:Flange; Model No.:N/A; Shaft End RPM [Max:Standard Pilot; Port Orientation - Cover End:1.25 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
Rexroth A2FM56 RING PISTON A2FM56 RING A2FM56 CYLINDER BLOCK A2FM56 VALVE PLATE M A2FM56 DRIVE SHAFTManufacturer Part No.:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Minor Diameter [Max:Right Hand (CW); Controlled Flow Rate:3525VQ35A21-11BB20; Port Size:3; GPM @ 1,800 rpm, Shaft End:Flange; Cover End Flow @ RPM:N/A; Spline Description:Standard Pilot; Mounting:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
REXROTH A4VG40 SADDLE BEARING A4VG40 BEARING SEAT A4VG40 COIL SPRING A4VG40 SEAL OILPort Type:76.0 LB; Cover End Flow @ RPM:Flange Mount; Spline Description:Right Hand (CW); Seal Material:3525VQ35A21-11BB20; Shaft End Flow @ RPM:3; Minor Diameter [Max:Flange; Pressure Port Size, Shaft End:N/A; Relief Valve Setting:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
Rexroth A10VO71 A10VSO71 SHAFT OIL SEAL A10VSO71 METARIS A10VSO71 HEAD BLOCK A10VSO71 SEAL KIT A10VSO71 SPRING SPLShaft Dia.:76.0 LB; Integral Valve Configuration:Flange Mount; Minor Diameter [Max:Right Hand (CW); Spline Description:3525VQ35A21-11BB20; Weight:3; Major Diameter [Min:Flange; Manufacturer Part No.:N/A; Shaft End RPM [Max:Standard Pilot; Seal Material:1.25 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
Rexroth A6VM500 DRIVE SHAFT A6VM500 CENTER PIN A6VM500 METARIS A6VM500 HEAD BLOCKShaft Type:76.0 LB; Max. RPM [Max:Flange Mount; Spline Description:Right Hand (CW); Manufacturer Part No.:3525VQ35A21-11BB20; Minor Diameter:3; Shaft Length:Flange; Shaft End RPM [Max:N/A; Cover End Flow @ RPM:Standard Pilot; Mounting Flange:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;
Linde BMV135 hydraulic motor repair parts BMV135 cylinder block BMV135 piston shoeRelief Valve Setting:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Minor Diameter:3525VQ35A21-11BB20; Pump Series:3; Shaft Length:Flange; Integral Valve Configuration:N/A; Manufacturer Part No.:Standard Pilot; Seal Material:1.25 in; Spline Description:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ35A21-11BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):6.88;

 

 

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed HITACHI EX200-1 CENTER PIN EX200-1 HEAD BLOCK EX200-1 BACK COVER EX200-1 VALVE PLATE SOCKET Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us