Home>Products>Excavator Hydraulic>genuine MAG170 final drive and travel motor assy
genuine MAG170 final drive and travel motor assy MODELS
Need a CAD or 3D Model?
genuine MAG170 final drive and travel motor assy
category
Excavator Hydraulic
genuine MAG170 final drive and travel motor assy SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
genuine MAG170 final drive and travel motor assy Systems
- 1.25 in
- 14 Tooth Splined
- 4525VQ
- 1.9375 in
- Buna-N
- 2200
- 1.04 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 2200
- 2200
- N/A
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- 1.248 in
- 1.247 in
- N/A
- N/A
- N/A
- 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
- 4525VQ60A21-11AA20-LH
- 3000
- 2500
- 31.5
- 90
- w/o Integral Valves
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1 in Flange
- 1 1/2 in Flange
- 4.12
- 11.8
genuine MAG170 final drive and travel motor assy Dimensions
Kobelco excavator final drive motor assy,final drive assy, travel motor assy for SK14,SK20,SK75,SK100,SK120,SK200,SK300 | Cover End Flow @ RPM:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Weight:Left Hand (CCW); Major Diameter [Max:4525VQ60A21-11AA20-LH; Relief Valve Setting:3 1/2; Shaft Dia.:Flange; Shaft Length:N/A; Shaft End Flow @ RPM:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
engine parts,NT855,K19,M11,piston,piston ring,piston pin,cylinder liner,Shantui engine parts for SD16,SD22,SD32,SD42 | Controlled Flow Rate:101.0 LB; Shaft Type:Flange Mount; Minor Diameter:Left Hand (CCW); Port Orientation - Shaft End:4525VQ60A21-11AA20-LH; Minor Diameter [Min:3 1/2; Shaft End RPM [Max:Flange; Relief Valve Setting:N/A; Shaft Key:Standard Pilot; Spline Description:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
Takeuchi slewing shaft,driving motor shaft for excavator Kobelco,Volvo,Doosan | Mounting:101.0 LB; Seal Material:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Displacement Cover End (cu in/revolution):4525VQ60A21-11AA20-LH; Minor Diameter:3 1/2; Shaft Key:Flange; Cover End Flow @ RPM:N/A; Cover End Pressure [Max:Standard Pilot; Rotation:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
mini final drive for PC30/PC40/PC50/PC60/PC75/PC100/PC120/PC130 | Port Type:101.0 LB; Mounting:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Shaft Type:4525VQ60A21-11AA20-LH; Major Diameter [Min:3 1/2; Pressure Port Size, Cover End:Flange; Displacement Shaft End (cu in/revolution):N/A; Spline Description:Standard Pilot; Minor Diameter [Max:1.25 in; Shaft Key:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
Walking motor Kobelco,final drive,travel motor for Mini excavator Kobelco SK05, SK07,SK09,SK60 | Spline Description:101.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Size:Left Hand (CCW); Minor Diameter [Min:4525VQ60A21-11AA20-LH; Shaft Length:3 1/2; Shaft End Flow @ RPM:Flange; Port Orientation - Shaft End:N/A; Shaft Key:Standard Pilot; Shaft Type:1.25 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
doosan excavator rubber track, excavator rubber belt, rubber track | Pressure Port Size, Cover End:101.0 LB; Controlled Flow Rate:Flange Mount; Major Diameter [Max:Left Hand (CCW); Minor Diameter:4525VQ60A21-11AA20-LH; Minor Diameter [Min:3 1/2; Shaft End RPM [Max:Flange; Shaft Length:N/A; Port Size:Standard Pilot; Port Orientation - Shaft End:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
EX330 excavator hydraulic pump | Shaft Type:101.0 LB; Manufacturer Part No.:Flange Mount; Port Type:Left Hand (CCW); Pressure Port Size, Cover End:4525VQ60A21-11AA20-LH; GPM @ 1,800 rpm, Shaft End:3 1/2; Weight:Flange; Seal Material:N/A; Port Orientation - Cover End:Standard Pilot; Relief Valve Setting:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
Excavator recoil spring / idler cushion pc/Kobelco/Volvo/Doosan | Shaft Length:101.0 LB; Port Orientation - Shaft End:Flange Mount; Port Size:Left Hand (CCW); Displacement Cover End (cu in/revolution):4525VQ60A21-11AA20-LH; Minor Diameter [Min:3 1/2; Max. RPM [Max:Flange; Shaft Key:N/A; Minor Diameter [Max:Standard Pilot; Spline Description:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
excavator hydraulic main pump assy for PC128UU,PC130,PC130-7,PC150-3,PC150-5,PC160-7 | Shaft Key:101.0 LB; Shaft End Flow @ RPM:Flange Mount; Spline Description:Left Hand (CCW); Shaft End RPM [Max:4525VQ60A21-11AA20-LH; Manufacturer Part No.:3 1/2; Controlled Flow Rate:Flange; Seal Material:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Integral Valve Configuration:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
excavator spare parts PC200-7 single shank ripper 205-950-00120 including tooth point and pin | GPM @ 1,800 rpm, Cover End:101.0 LB; Cover End RPM [Max:Flange Mount; Weight:Left Hand (CCW); Major Diameter [Max:4525VQ60A21-11AA20-LH; Rotation:3 1/2; Model No.:Flange; Integral Valve Configuration:N/A; Minor Diameter [Max:Standard Pilot; Cover End Pressure [Max:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):11.8; |
genuine MAG170 final drive and travel motor assy Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
genuine MAG170 final drive and travel motor assy Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed genuine MAG170 final drive and travel motor assy Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8