Home>Products>Excavator Hydraulic>Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy MODELS
Need a CAD or 3D Model?
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy
category
Excavator Hydraulic
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy Systems
- 0.875 in
- 13 Tooth Splined
- 10.5 gpm @ 1800 rpm
- V10
- 1 5/8 in
- SAE-8
- Buna-N
- 2800
- 2000 psi
- 10 1/2
- S
- SAE A, 2 Bolt
- S
- 1
- 90° CCW from Inlet
- 1.39
- w/o Integral Valves
- 12B
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy Dimensions
excavator operator cab,drive cab,PC60,PC75,PC90,PC100,PC120,PC150,PC180,PC200-5,PC220-6,PC240-7,PC300 | Mounting:15.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Relief Valve Setting:SAE-16; Pressure Port Size, Cover End:SAE; Controlled Flow Rate:N/A; Port Orientation - Cover End:20; Displacement Shaft End (cu in/revolution):7 gpm @ 1200 rpm; Weight:0.875 in; Minor Diameter [Max:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
Kubota walking motor, travel motor,final drive, RX502,KX161-3,KX91-2 | Minor Diameter [Min:15.0 LB; Controlled Flow Rate:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Relief Valve Setting:SAE-16; Shaft End Pressure [Max:SAE; GPM @ 1,800 rpm, Shaft End:N/A; Displacement Cover End (cu in/revolution):20; Pump Series:7 gpm @ 1200 rpm; Cover End Flow @ RPM:0.875 in; Cover End RPM [Max:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
SK480LC-8 Kobelco arm/bucket cylinder assy made in China | Displacement Cover End (cu in/revolution):15.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Min:Right Hand (CW); Port Size:SAE-16; Shaft End Pressure [Max:SAE; Mounting Flange:N/A; GPM @ 1,800 rpm, Cover End:20; Minor Diameter [Min:7 gpm @ 1200 rpm; Controlled Flow Rate:0.875 in; Seal Material:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
hydraulic steering power steering pump for D355A-3/5 07442-71102 | Max. RPM [Max:15.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Displacement Cover End (cu in/revolution):SAE-16; Manufacturer Part No.:SAE; Pressure Port Size, Shaft End:N/A; Seal Material:20; Major Diameter [Min:7 gpm @ 1200 rpm; Relief Valve Setting:0.875 in; Major Diameter [Max:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
rubber track for harvester machine, rubber tracks for bobcat excavator, track mat rubber for kobelco volvo doosan | Major Diameter [Min:15.0 LB; Minor Diameter [Min:Flange Mount; Shaft Key:Right Hand (CW); Mounting:SAE-16; Shaft End RPM [Max:SAE; Displacement Cover End (cu in/revolution):N/A; Shaft Type:20; Shaft Dia.:7 gpm @ 1200 rpm; Spline Description:0.875 in; Major Diameter [Max:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
Used final drive for excavator pc300/Kobelco/Volvo/Doosan | Minor Diameter:15.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Minor Diameter [Max:SAE-16; Model No.:SAE; Manufacturer Part No.:N/A; Major Diameter [Max:20; Max. RPM [Max:7 gpm @ 1200 rpm; Port Type:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
rubber pad/rubber track pad for excavators/diggers kubota/sumitomo/volvo | Manufacturer Part No.:15.0 LB; Mounting Flange:Flange Mount; Major Diameter [Max:Right Hand (CW); Seal Material:SAE-16; Minor Diameter [Min:SAE; Cover End Flow @ RPM:N/A; Weight:20; Displacement Cover End (cu in/revolution):7 gpm @ 1200 rpm; Max. RPM [Max:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
kobelco excavator swing motor assy and swing reduction for SK200-6E/SK230-6/SK200-6/SK200-6E/SK260-8/SK330-6/SK230-3/SK200-8 | Shaft Type:15.0 LB; Pilot Type:Flange Mount; Max. RPM [Max:Right Hand (CW); Major Diameter [Min:SAE-16; Cover End Pressure [Max:SAE; Shaft Length:N/A; Seal Material:20; Integral Valve Configuration:7 gpm @ 1200 rpm; Cover End Flow @ RPM:0.875 in; Minor Diameter [Max:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
takeuchi 400x72.5x74 rubber track, custom rubber tracks for excavator kubota,bobcat,volvo,kobelco | Spline Description:15.0 LB; Port Type:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:SAE-16; Model No.:SAE; Shaft Dia.:N/A; GPM @ 1,800 rpm, Shaft End:20; Shaft Length:7 gpm @ 1200 rpm; Minor Diameter:0.875 in; Weight:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
final drive kx161-3 Excavator final drive,DAEWOO DH55 DH55-5 DH220-2 DH220-3 DH220-5 DH225-7 DH280-3 DH320 DH320-2/3 DH450 | Major Diameter [Min:15.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Type:Right Hand (CW); Shaft Key:SAE-16; Model No.:SAE; Shaft End RPM [Max:N/A; Relief Valve Setting:20; Pressure Port Size, Shaft End:7 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.875 in; Mounting:13 Tooth Splined; GPM @ Speed:10.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:2800; Pressure [Max:2000 psi; GPM @ 1,800 rpm:10 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.39; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:12B; |
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed Travel cycloidal drive reducer for excavator Zx250lc-3 Final drive travel motor assy Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8