• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Excavator Hydraulic>Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235

  • Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235
  • Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235

category

Excavator Hydraulic

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 Systems

  • 0.875 in
  • Straight w/ Key
  • V2010
  • 2.3125 in
  • Buna-N
  • 3000
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 3000
  • 3000
  • N/A
  • 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • V2010-2F7S2S-1CC12
  • 2500
  • 2500
  • 3
  • 10.5
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.4
  • 1.39

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 Dimensions

 

kubota 450 90 rubber track,pc38uu rubber track manufacturer for crawler excavatorMinor Diameter [Max:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Dia.:Right Hand (CW); Major Diameter [Min:V2010-2F7S2S-1CC12; Cover End RPM [Max:1 1/2; Minor Diameter [Min:Flange; Shaft End RPM [Max:3/16 in; Cover End Pressure [Max:N/A; Cover End Flow @ RPM:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
liquid transfer pump,excavator hydraulic pump for Kawasaki,Doosan,KPM,KYB,Rexroth,Daewoo,Sumitomo,KobelcoMinor Diameter [Max:30.0 LB; Spline Description:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Relief Valve Setting:V2010-2F7S2S-1CC12; Shaft End Flow @ RPM:1 1/2; Rotation:Flange; Mounting:3/16 in; Major Diameter [Max:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
Kobelco SK450 final drive, travel motor,SK30,SK60,SK80,SK90,SK120,SK135,SK75,SK200,SK210,SK220,SK250,SK330,SK450Integral Valve Configuration:30.0 LB; Spline Description:Flange Mount; Shaft Type:Right Hand (CW); Cover End Pressure [Max:V2010-2F7S2S-1CC12; Shaft Length:1 1/2; Pressure Port Size, Cover End:Flange; Displacement Cover End (cu in/revolution):3/16 in; Shaft End Pressure [Max:N/A; Cover End RPM [Max:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
rubber crawler for Doosan excavator,rubber track for DX420LC.DH300LC-7,DX60W,DL420A,S220,DA30Cover End Flow @ RPM:30.0 LB; Spline Description:Flange Mount; Shaft Type:Right Hand (CW); Minor Diameter [Min:V2010-2F7S2S-1CC12; Model No.:1 1/2; Shaft Seal Type:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Rotation:N/A; Weight:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
Hydraulic main pump for excavator Volvo/Doosan/KobelcoModel No.:30.0 LB; Pressure Port Size, Shaft End:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Controlled Flow Rate:V2010-2F7S2S-1CC12; Pressure Port Size, Cover End:1 1/2; Shaft End Flow @ RPM:Flange; Port Orientation - Shaft End:3/16 in; Pilot Type:N/A; Max. RPM [Max:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
Final drive for E70B, travel motor assy for E70BMajor Diameter [Min:30.0 LB; Rotation:Flange Mount; Pilot Type:Right Hand (CW); Cover End Pressure [Max:V2010-2F7S2S-1CC12; Minor Diameter [Min:1 1/2; Minor Diameter [Max:Flange; Minor Diameter:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Key:0.875 in; Mounting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
swing motor E320,swing device for E40/E70/E110/E120/E200/E300/E450/E235/E320/E325/E330/E350Relief Valve Setting:30.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Length:Right Hand (CW); Shaft Type:V2010-2F7S2S-1CC12; Shaft End Pressure [Max:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Pump Series:3/16 in; Pilot Type:N/A; Major Diameter [Min:0.875 in; Mounting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
gearboxes roller bearing,gearbox housing spare parts for excavator kobelco,volvo,doosanMajor Diameter [Max:30.0 LB; Integral Valve Configuration:Flange Mount; Controlled Flow Rate:Right Hand (CW); Shaft Length:V2010-2F7S2S-1CC12; Shaft End Pressure [Max:1 1/2; Port Type:Flange; Minor Diameter [Min:3/16 in; Port Orientation - Shaft End:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
PC300 PC300-8 PC340-7 PC350-8 Hydraulic Pump/main Pump Ass'y,708-2G-00700 Pump PartsRelief Valve Setting:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Manufacturer Part No.:V2010-2F7S2S-1CC12; Shaft End RPM [Max:1 1/2; Major Diameter [Min:Flange; Cover End Pressure [Max:3/16 in; Port Size:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;
cabin,operator cabin,excavator cabin for kobelco,sumitomo,kubotaPilot Type:30.0 LB; Mounting Flange:Flange Mount; Shaft Length:Right Hand (CW); Cover End Flow @ RPM:V2010-2F7S2S-1CC12; Pressure Port Size, Cover End:1 1/2; Port Type:Flange; Shaft Key:3/16 in; Model No.:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-2F7S2S-1CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39;

 

 

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Excavator Hydraulic CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Kobelco final drive,excavator travel motor,SK135UR,SK50UR,SK55,SK40,SK30,SK35,SK45,SK60,SK80,SK120,SK70,SK210,SK270,SK280,SK235 Also Viewed

  • volvo excavator undercarriage parts , track shoe assy for volvo EC210B
  • PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
  • Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
  • volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
  • PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us