Home>Products>Excavator Hydraulic>Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive MODELS
Need a CAD or 3D Model?
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive
category
Excavator Hydraulic
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive Systems
- 0.875 in
- Straight w/ Key
- V2010
- 2.3125 in
- Buna-N
- 2400
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 2800
- 2400
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
- V2010-1F13S7S-1AA12-LH
- 2000
- 2200
- 10.5
- 19.5
- N/A
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.39
- 2.59
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive Dimensions
ZX270-3 excavator hydraulic pump | Cover End Pressure [Max:30.0 LB; Relief Valve Setting:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Minor Diameter:V2010-1F13S7S-1AA12-LH; Mounting Flange:1 1/2; Pressure Port Size, Shaft End:Flange; Pump Series:3/16 in; Max. RPM [Max:N/A; Shaft Key:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
excavator undercarriage parts, track roller,lower roller,PC200-1/2/3/5/6/7/8,PC200LC-7/8,PC210-8,PC210LC-8 | Shaft End RPM [Max:30.0 LB; Manufacturer Part No.:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); GPM @ 1,800 rpm, Cover End:V2010-1F13S7S-1AA12-LH; Rotation:1 1/2; Minor Diameter [Min:Flange; Pressure Port Size, Shaft End:3/16 in; Shaft Type:N/A; Cover End Flow @ RPM:0.875 in; Shaft Seal Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
4tne84 diesel engine and engine parts for excavator, Kubota Deutz Mistubishi | Mounting Flange:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Max. RPM [Max:V2010-1F13S7S-1AA12-LH; Pressure Port Size, Cover End:1 1/2; Shaft Length:Flange; Seal Material:3/16 in; Major Diameter [Max:N/A; Minor Diameter [Min:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Sumitomo hydraulic digger bucket cylinder assy for SH60/SH100/SH120/SH135/SH200/SH220/SH240/SH300 | Mounting:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Pump Series:V2010-1F13S7S-1AA12-LH; Shaft Dia.:1 1/2; Minor Diameter:Flange; Shaft Key:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Mounting Flange:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
walking motor drive,walking machine motors excavator parts for kobelco,daewoo,doosan,volvo | Model No.:30.0 LB; Pilot Type:Flange Mount; Shaft Key:Left Hand (CCW); Relief Valve Setting:V2010-1F13S7S-1AA12-LH; GPM @ 1,800 rpm, Cover End:1 1/2; Max. RPM [Max:Flange; Manufacturer Part No.:3/16 in; Minor Diameter [Min:N/A; Port Orientation - Shaft End:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Kobelco rubber crawler,250x72,320x84,300x55,350x90 | GPM @ 1,800 rpm, Cover End:30.0 LB; Rotation:Flange Mount; Shaft Key:Left Hand (CCW); Minor Diameter:V2010-1F13S7S-1AA12-LH; Cover End RPM [Max:1 1/2; Shaft Seal Type:Flange; Max. RPM [Max:3/16 in; Mounting Flange:N/A; Pump Series:0.875 in; Shaft Length:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
rubber belt,mini excavator rubber track,small rubber track for PC350,E240,EX120,DH420,UH07,FH120,R150,HD88,SK200,MS280,SE200 | Pump Series:30.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Dia.:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:V2010-1F13S7S-1AA12-LH; Model No.:1 1/2; Spline Description:Flange; Displacement Cover End (cu in/revolution):3/16 in; Weight:N/A; Minor Diameter [Min:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
mini excavator main pump, main pump uchida for kobelco doosan volvo | GPM @ 1,800 rpm, Shaft End:30.0 LB; Minor Diameter [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); Shaft End Pressure [Max:V2010-1F13S7S-1AA12-LH; Relief Valve Setting:1 1/2; Mounting:Flange; Integral Valve Configuration:3/16 in; Major Diameter [Max:N/A; Cover End Flow @ RPM:0.875 in; Shaft Key:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Gear pump for excavator, PC25,PC38,PC40MR,PC50UU,PC60,PC100,PC120,PC200,PC220,PC300,PC350 | Mounting Flange:30.0 LB; Controlled Flow Rate:Flange Mount; Seal Material:Left Hand (CCW); Major Diameter [Max:V2010-1F13S7S-1AA12-LH; Max. RPM [Max:1 1/2; Weight:Flange; Port Orientation - Shaft End:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Cover End Flow @ RPM:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Kubota excavator travel track motor,final drive for excavator KX60,KX91,KX135,KX155,KX161,KX163,KX165,KX185 | Minor Diameter [Min:30.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Displacement Shaft End (cu in/revolution):V2010-1F13S7S-1AA12-LH; Pressure Port Size, Cover End:1 1/2; Weight:Flange; Major Diameter [Max:3/16 in; Cover End Pressure [Max:N/A; Shaft End Flow @ RPM:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1AA12-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed Nabtesco GM18 final drive, travel motor assy PC128UU-1, PC128UU-1final drive Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8