• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Excavator Hydraulic>final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R

  • final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R
  • final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R

category

Excavator Hydraulic

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R Systems

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17A11-11CB20-LH
  • 3000
  • 3000
  • 16.5
  • 25.5
  • w/o Integral Valves
  • Outlet 45° CCW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.22
  • 3.37

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R Dimensions

 

Hydraulic main pump for excavator Volvo/Doosan/KobelcoIntegral Valve Configuration:45.0 LB; Controlled Flow Rate:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Pilot Type:2520VQ17A11-11CB20-LH; Cover End RPM [Max:2 1/2; Rotation:Flange; Minor Diameter [Min:N/A; Pressure Port Size, Cover End:Standard Pilot; Port Size:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
bobcat excavator travel motor, walking motor, final drive MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX328,MX334,MX430,E26,E62Manufacturer Part No.:45.0 LB; Relief Valve Setting:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Minor Diameter:2520VQ17A11-11CB20-LH; Model No.:2 1/2; Cover End Pressure [Max:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Seal Material:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
excavator final drive, Kobota,Kato, Doosan,KobelcoSeal Material:45.0 LB; Port Orientation - Shaft End:Flange Mount; Pump Series:Left Hand (CCW); Major Diameter [Min:2520VQ17A11-11CB20-LH; Cover End Flow @ RPM:2 1/2; Shaft Length:Flange; Shaft Dia.:N/A; Weight:Standard Pilot; Port Type:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Kobelco SK60 final drive, travel motor assy for SK60,SK30,SK60,SK80,SK90,SK120,SK135,SK75,SK200,SK210,SK220,SK250,SK330,SK450Pressure Port Size, Shaft End:45.0 LB; Cover End RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Pressure Port Size, Cover End:2520VQ17A11-11CB20-LH; Pump Series:2 1/2; Shaft End RPM [Max:Flange; Weight:N/A; Major Diameter [Min:Standard Pilot; Max. RPM [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Excavator PC210-7 hydraulic pumpShaft End Flow @ RPM:45.0 LB; Port Size:Flange Mount; Mounting:Left Hand (CCW); Cover End Pressure [Max:2520VQ17A11-11CB20-LH; Minor Diameter [Max:2 1/2; Shaft Type:Flange; Spline Description:N/A; Port Orientation - Shaft End:Standard Pilot; Weight:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
PC200-8 708-2L-00500 Excavator hydraulic pump,genuine Japan hydraulic main pumpPort Orientation - Shaft End:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Type:Left Hand (CCW); Model No.:2520VQ17A11-11CB20-LH; Displacement Cover End (cu in/revolution):2 1/2; Displacement Shaft End (cu in/revolution):Flange; Major Diameter [Min:N/A; Integral Valve Configuration:Standard Pilot; Minor Diameter [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Excavator cabin for Kobelco SK200-8,SK210-8,SK250-8Shaft Type:45.0 LB; Cover End RPM [Max:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Model No.:2520VQ17A11-11CB20-LH; Port Size:2 1/2; Relief Valve Setting:Flange; Cover End Flow @ RPM:N/A; Integral Valve Configuration:Standard Pilot; Pump Series:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Kobelco SK120 final drive, travel motor,SK30,SK60,SK80,SK90,SK120,SK135,SK75,SK200,SK210,SK220,SK250,SK330,SK450Shaft End RPM [Max:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft End Flow @ RPM:2520VQ17A11-11CB20-LH; Shaft End Pressure [Max:2 1/2; Major Diameter [Min:Flange; Cover End Flow @ RPM:N/A; Port Orientation - Shaft End:Standard Pilot; Shaft Dia.:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
excavator undercarriage parts,excavator track roller,lower roller,ZX100-1/2,EX100-2/3/5,ZX110,EX120-3/5/6,ZX130HMax. RPM [Max:45.0 LB; Minor Diameter [Max:Flange Mount; Port Size:Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ17A11-11CB20-LH; Shaft End RPM [Max:2 1/2; Shaft Key:Flange; Shaft Seal Type:N/A; Cover End Flow @ RPM:Standard Pilot; Cover End RPM [Max:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
rubber track/ belt for mitsubishi mm40sr excavator, engineering for kubota,kobelco,volvo,doosanMounting:45.0 LB; Shaft End RPM [Max:Flange Mount; Model No.:Left Hand (CCW); Port Orientation - Cover End:2520VQ17A11-11CB20-LH; Port Orientation - Shaft End:2 1/2; Shaft Type:Flange; Pressure Port Size, Shaft End:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Minor Diameter [Min:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A11-11CB20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;

 

 

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Excavator Hydraulic CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed final drive, travel motor assy,for excavator PC60-3/5/6/7/8,PC600-7,PC600LC-7,PC650LC-8R Also Viewed

  • volvo excavator undercarriage parts , track shoe assy for volvo EC210B
  • PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
  • Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
  • volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
  • PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us