Home>Products>Excavator Hydraulic>track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 MODELS
Need a CAD or 3D Model?
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8
category
Excavator Hydraulic
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 Systems
- 0.875 in
- Straight w/ Key
- V2010
- 2.3125 in
- Buna-N
- 2400
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 2800
- 2400
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
- V2010-1F13S7S-1CC12
- 2000
- 2200
- 10.5
- 19.5
- N/A
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.39
- 2.59
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 Dimensions
daewoo solar S130LCV final drive,excavator travel motor,DH55,DH60,DH75,DH90,DH140,DH160,DH210,DH225,DH255,S140,S160,S150,DH170 | Seal Material:30.0 LB; Model No.:Flange Mount; Port Type:Right Hand (CW); Cover End Flow @ RPM:V2010-1F13S7S-1CC12; Minor Diameter:1 1/2; Cover End Pressure [Max:Flange; Shaft Type:3/16 in; Pump Series:N/A; Shaft End RPM [Max:0.875 in; Max. RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
hydraulic axial piston pump excavator part for kobelco volvo doosan daewoo | Port Orientation - Cover End:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Pump Series:V2010-1F13S7S-1CC12; Shaft Dia.:1 1/2; Port Size:Flange; Shaft Length:3/16 in; Pilot Type:N/A; Relief Valve Setting:0.875 in; Port Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
parts for excavator hydraulic main pump Kobelco Volvo Doosan | Shaft Seal Type:30.0 LB; Minor Diameter:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2010-1F13S7S-1CC12; Pilot Type:1 1/2; Weight:Flange; Cover End Flow @ RPM:3/16 in; Shaft End Pressure [Max:N/A; Mounting Flange:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
swing device for volvo EC240, swing motor for volvo EC240, swing gearbox for volvo EC240 | Cover End RPM [Max:30.0 LB; Manufacturer Part No.:Flange Mount; Minor Diameter [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2010-1F13S7S-1CC12; GPM @ 1,800 rpm, Cover End:1 1/2; Model No.:Flange; Mounting:3/16 in; Pilot Type:N/A; Shaft Dia.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
injector fuel pump,piston ring,gasket kit,cylinder,S6D155,V2203,4D95,6D95,S6D110,S108,S6D102 | Max. RPM [Max:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Cover End Pressure [Max:V2010-1F13S7S-1CC12; GPM @ 1,800 rpm, Shaft End:1 1/2; Shaft Type:Flange; Mounting:3/16 in; Major Diameter [Min:N/A; Minor Diameter:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
final drive, travel motor for excavator ZX250H-3G,ZX250LC-3, ZX250LC-3G,ZX260LCH-3G | Rotation:30.0 LB; Shaft Dia.:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Integral Valve Configuration:V2010-1F13S7S-1CC12; Shaft End Flow @ RPM:1 1/2; Relief Valve Setting:Flange; Major Diameter [Min:3/16 in; Seal Material:N/A; Pilot Type:0.875 in; Minor Diameter:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
swing gearbox/swing motor ZX60/ZX70/ZX120/ZX200/ZX230/ZX240/ZX250/ZX360/ZX450 | Shaft Seal Type:30.0 LB; Shaft Length:Flange Mount; Port Type:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F13S7S-1CC12; Relief Valve Setting:1 1/2; Minor Diameter [Max:Flange; Minor Diameter [Min:3/16 in; Spline Description:N/A; Shaft End Pressure [Max:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
kobelco excavator swing motor assy and swing reduction for SK200-6E/SK230-6/SK200-6/SK200-6E/SK260-8/SK330-6/SK230-3/SK200-8 | Seal Material:30.0 LB; Controlled Flow Rate:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Cover End RPM [Max:V2010-1F13S7S-1CC12; Mounting:1 1/2; Manufacturer Part No.:Flange; Displacement Shaft End (cu in/revolution):3/16 in; Shaft End RPM [Max:N/A; Pump Series:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
SK100 travel motor gearbox assembly,Kobelco SK100 travel gearbox assy, travel motor assy for SK100 | Minor Diameter [Max:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft End Pressure [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:V2010-1F13S7S-1CC12; Displacement Shaft End (cu in/revolution):1 1/2; Integral Valve Configuration:Flange; Pump Series:3/16 in; Shaft Type:N/A; Cover End RPM [Max:0.875 in; Port Orientation - Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Kobelco cabin, SK200-8,SK210-8,SK250-8 | Port Orientation - Cover End:30.0 LB; Minor Diameter [Max:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F13S7S-1CC12; Port Orientation - Shaft End:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Port Size:3/16 in; Shaft Seal Type:N/A; Minor Diameter:0.875 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed track shoe for excavator,excavator track link assy.for PC210LC-8,PC220-1/2/3/5/6/7/8,PC220LC-7,PC240LC-8,PC240-8 Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8