Home>Products>Excavator Hydraulic>excavator hydraulic pump parts,engine part n14 fuel pumps
excavator hydraulic pump parts,engine part n14 fuel pumps MODELS
Need a CAD or 3D Model?
excavator hydraulic pump parts,engine part n14 fuel pumps
category
Excavator Hydraulic
excavator hydraulic pump parts,engine part n14 fuel pumps SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
excavator hydraulic pump parts,engine part n14 fuel pumps Systems
- 0.73 in
- 11 Tooth Splined
- 15 gpm @ 1800 rpm
- V20
- 1 1/4 in
- 3/4 in NPT
- Buna-N
- 2500
- 2500 psi
- 15
- P
- SAE A, 2 Bolt
- P
- 1
- 90° CCW from Inlet
- 1.93
- w/o Integral Valves
- 38B
excavator hydraulic pump parts,engine part n14 fuel pumps Dimensions
Sumitomo hydraulic excavator bucket/arm cylinder for SH60/SH100/SH120/SH135/SH200/SH220/SH240 | Rotation:18.0 LB; Shaft End Flow @ RPM:Flange Mount; Pilot Type:Right Hand (CW); Displacement Cover End (cu in/revolution):1 1/4; GPM @ 1,800 rpm, Shaft End:NPT; Cover End RPM [Max:N/A; Mounting Flange:11; Pressure Port Size, Shaft End:10 gpm @ 1200 rpm; Weight:0.73 in; Shaft End Pressure [Max:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
DH258 Daewoo travel motor for excavator | Pilot Type:18.0 LB; Seal Material:Flange Mount; Mounting:Right Hand (CW); Rotation:1 1/4; Displacement Cover End (cu in/revolution):NPT; Spline Description:N/A; Model No.:11; Major Diameter [Min:10 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
excavator travel motor for Kobelco, Kobelco travel reducer,final drive for SK300,SK310,SK330-8,SK350LC-8,SK400,SK460-8,SK480-8 | Rotation:18.0 LB; Spline Description:Flange Mount; Integral Valve Configuration:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:1 1/4; Mounting:NPT; Shaft Length:N/A; Cover End RPM [Max:11; Controlled Flow Rate:10 gpm @ 1200 rpm; Mounting Flange:0.73 in; Cover End Flow @ RPM:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
Final drive for E70B, travel motor assy for E70B | Shaft Key:18.0 LB; Model No.:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:1 1/4; Port Orientation - Cover End:NPT; Integral Valve Configuration:N/A; Shaft End Flow @ RPM:11; Pump Series:10 gpm @ 1200 rpm; Pressure Port Size, Cover End:0.73 in; Rotation:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
bearing for gearbox,hydraulic motor planetary gearbox excavator kobelco,doosan,volvo | Spline Description:18.0 LB; Pressure Port Size, Shaft End:Flange Mount; Pump Series:Right Hand (CW); Rotation:1 1/4; GPM @ 1,800 rpm, Shaft End:NPT; Weight:N/A; Shaft Seal Type:11; Mounting:10 gpm @ 1200 rpm; Manufacturer Part No.:0.73 in; Shaft Key:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
slewing motor assy for excavator,ZX230,ZX240,ZX300 | Rotation:18.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Length:Right Hand (CW); Pump Series:1 1/4; Shaft Key:NPT; Shaft Type:N/A; Max. RPM [Max:11; GPM @ 1,800 rpm, Cover End:10 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.73 in; Model No.:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
final drive gearbox casing,small speed reducer gearbox gearboxes supplier for excavator kobelco,volvo,doosan | Weight:18.0 LB; Shaft Dia.:Flange Mount; Relief Valve Setting:Right Hand (CW); Seal Material:1 1/4; Shaft End RPM [Max:NPT; Controlled Flow Rate:N/A; Minor Diameter [Min:11; Shaft Length:10 gpm @ 1200 rpm; Shaft End Pressure [Max:0.73 in; Pump Series:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
kyb final drive for excavator daewoo doosan volvo kobelco | Max. RPM [Max:18.0 LB; Port Size:Flange Mount; Major Diameter [Min:Right Hand (CW); Relief Valve Setting:1 1/4; Seal Material:NPT; Port Orientation - Cover End:N/A; Mounting Flange:11; Pressure Port Size, Cover End:10 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.73 in; Cover End Flow @ RPM:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
ZX210 excavator cab | Controlled Flow Rate:18.0 LB; Shaft End RPM [Max:Flange Mount; Mounting:Right Hand (CW); Pressure Port Size, Shaft End:1 1/4; Pump Series:NPT; Integral Valve Configuration:N/A; Relief Valve Setting:11; Shaft Key:10 gpm @ 1200 rpm; Max. RPM [Max:0.73 in; Minor Diameter:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
Final drive Kato HD250,HD400,HD450,HD550,HD700,HD800,HD900LC | Mounting:18.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:1 1/4; Minor Diameter:NPT; Max. RPM [Max:N/A; Shaft Key:11; Displacement Cover End (cu in/revolution):10 gpm @ 1200 rpm; Major Diameter [Max:0.73 in; Cover End Pressure [Max:11 Tooth Splined; GPM @ Speed:15 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:15; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1.93; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
excavator hydraulic pump parts,engine part n14 fuel pumps Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
excavator hydraulic pump parts,engine part n14 fuel pumps Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed excavator hydraulic pump parts,engine part n14 fuel pumps Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8