Home>Products>Excavator Hydraulic>excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan MODELS
Need a CAD or 3D Model?
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan
category
Excavator Hydraulic
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan Systems
- 11
- 0.625 in
- 9 Tooth Splined
- 4.5 gpm @ 1800 rpm
- V10
- 1 1/4 in
- SAE-8
- Buna-N
- 4000
- 2500 psi
- 4 1/2
- P
- SAE A, 2 Bolt
- S
- 1
- 90° CW from Inlet
- 0.6
- w/o Integral Valves
- 11D
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan Dimensions
swing device/swing motor for E40/E70/E110/E120/E200/E300/E450/E235/E320/E325/E330/E350 | Spline Description:15.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Rotation:Right Hand (CW); Relief Valve Setting:1; Shaft End RPM [Max:NPT; Port Size:N/A; Controlled Flow Rate:20; Shaft Type:3 gpm @ 1200 rpm; Pressure Port Size, Cover End:11; Model No.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
kubota excavator final drive,travel motor for excavator KX60,KX41,KX120,KX90,KX91,KX92,KX163,KX162,KX165,KX161 | Spline Description:15.0 LB; Mounting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Minor Diameter [Max:1; Manufacturer Part No.:NPT; Port Orientation - Shaft End:N/A; Shaft End Flow @ RPM:20; Weight:3 gpm @ 1200 rpm; Minor Diameter:11; Shaft End Pressure [Max:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
swing gearbox for ZX35U-2-3F,ZX55UR,ZX70,ZX75US-3-A,ZX75UU,ZX110,ZX120-3-6 | Mounting:15.0 LB; Shaft Dia.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Max. RPM [Max:1; Minor Diameter:NPT; GPM @ 1,800 rpm, Cover End:N/A; Integral Valve Configuration:20; Displacement Shaft End (cu in/revolution):3 gpm @ 1200 rpm; Minor Diameter [Min:11; Shaft End Flow @ RPM:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
excavator slewing bearing ring,hydraulic slewing rings for excavator Kobelco,Volvo,Doosan | Pressure Port Size, Shaft End:15.0 LB; Port Type:Flange Mount; Spline Description:Right Hand (CW); Shaft Length:1; Shaft End RPM [Max:NPT; Cover End Flow @ RPM:N/A; Port Orientation - Shaft End:20; Port Size:3 gpm @ 1200 rpm; Shaft Seal Type:11; Cover End Pressure [Max:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
bucket pin and bushing for excavator,pins and bushings pc60/Kobelco/Volvo | Port Size:15.0 LB; Pressure Port Size, Shaft End:Flange Mount; Mounting:Right Hand (CW); Relief Valve Setting:1; Weight:NPT; Pump Series:N/A; Mounting Flange:20; Max. RPM [Max:3 gpm @ 1200 rpm; Manufacturer Part No.:11; Minor Diameter [Max:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
hydraulic swing motor assy for excavator,mini excavator swing motor seal kit parts kobelco volvo doosan | Port Type:15.0 LB; Minor Diameter [Max:Flange Mount; Integral Valve Configuration:Right Hand (CW); Port Orientation - Shaft End:1; Max. RPM [Max:NPT; Pilot Type:N/A; Port Orientation - Cover End:20; Minor Diameter [Min:3 gpm @ 1200 rpm; GPM @ 1,800 rpm, Cover End:11; Controlled Flow Rate:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
mini final drive for PC30/PC40/PC50/PC60/PC75/PC100/PC120/PC130 | Displacement Shaft End (cu in/revolution):15.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Key:Right Hand (CW); Seal Material:1; GPM @ 1,800 rpm, Shaft End:NPT; Weight:N/A; Spline Description:20; Minor Diameter:3 gpm @ 1200 rpm; GPM @ 1,800 rpm, Cover End:11; Pressure Port Size, Cover End:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
Volvo hydraulic pump,Kawasaki Pump K3V140DT,K3V63DT,K3V112DT,K3V180DT,K5V140DT,Hyunday/Daewoo | Model No.:15.0 LB; Cover End RPM [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Weight:1; GPM @ 1,800 rpm, Cover End:NPT; Shaft Type:N/A; Displacement Shaft End (cu in/revolution):20; Rotation:3 gpm @ 1200 rpm; Major Diameter [Max:11; Relief Valve Setting:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
Final drive for E70B, travel motor assy for E70B | Pilot Type:15.0 LB; Model No.:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Port Type:1; Mounting Flange:NPT; Major Diameter [Min:N/A; Seal Material:20; Controlled Flow Rate:3 gpm @ 1200 rpm; Shaft Dia.:11; Minor Diameter:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
excavator ex200 hydraulic ram pump, engine part diesel fuel pump for Daewoo,Sumitomo,Kobelco,Volvo,Doosan | Pilot Type:15.0 LB; Major Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Mounting:1; Cover End Flow @ RPM:NPT; Minor Diameter [Max:N/A; Spline Description:20; Port Type:3 gpm @ 1200 rpm; Pressure Port Size, Shaft End:11; Rotation:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:4.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4000; Pressure [Max:2500 psi; GPM @ 1,800 rpm:4 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):0.6; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11D; |
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed excavator gearbox and drive shaft,gear gearbox speed reducer final drive for kobelco,volvo,doosan Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8