Home>Products>Hitachi hydraulic pump>PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand MODELS
Need a CAD or 3D Model?
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand
category
Hitachi hydraulic pump
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand Technical information
- 0.875 in
- Straight w/ Key
- 2520V
- 2.32 in
- Buna-N
- 1800
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 1800
- 1800
- N/A
- 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
- 2520V12A5-1AD22R
- 3000
- 2500
- 7.5
- 18
- N/A
- Outlet 135° CW from Inlet
- Outlet Opposite Inlet
- 3/4 in Code 61
- 1 in Code 61
- 1.1
- 2.5
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand Products and services
KAIYUAN Excavator Parts KY85 Final Drive KY85 Travel Motor Device | Displacement Shaft End (cu in/revolution):45.0 LB; Cover End RPM [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft End Pressure [Max:2520V12A5-1AD22R; Port Type:2 1/2; Displacement Cover End (cu in/revolution):Flange; Mounting:1/4 in; Shaft End Flow @ RPM:Standard Pilot; Shaft Seal Type:0.875 in; Model No.:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
Hitachi EX75UR final drive,EX75UR travel motor assy aftermarket GM09 | Displacement Cover End (cu in/revolution):45.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Key:Right Hand (CW); Mounting Flange:2520V12A5-1AD22R; Cover End Pressure [Max:2 1/2; Minor Diameter [Min:Flange; Max. RPM [Max:1/4 in; Shaft Dia.:Standard Pilot; Mounting:0.875 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
Remaned PC75UU-2 Swing Motor | Controlled Flow Rate:45.0 LB; Major Diameter [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Port Size:2520V12A5-1AD22R; Cover End Pressure [Max:2 1/2; Shaft End RPM [Max:Flange; Pump Series:1/4 in; Shaft Type:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Minor Diameter [Min:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
PC200LC-6E hydraulic pump | Port Orientation - Shaft End:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Cover End RPM [Max:2520V12A5-1AD22R; Major Diameter [Min:2 1/2; Cover End Flow @ RPM:Flange; Minor Diameter:1/4 in; Minor Diameter [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
MAG-33V-500-3 travel motor ,kyb excavator final drive for MAG33V500-3 series | Shaft Type:45.0 LB; Spline Description:Flange Mount; Shaft Key:Right Hand (CW); Rotation:2520V12A5-1AD22R; Cover End Pressure [Max:2 1/2; Cover End RPM [Max:Flange; Minor Diameter [Min:1/4 in; Displacement Shaft End (cu in/revolution):Standard Pilot; Model No.:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
SK100 track shoe,good quality SK100 track bolts,track nuts | Manufacturer Part No.:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Shaft Dia.:2520V12A5-1AD22R; Shaft Length:2 1/2; Port Orientation - Cover End:Flange; Displacement Shaft End (cu in/revolution):1/4 in; Port Orientation - Shaft End:Standard Pilot; Minor Diameter:0.875 in; Shaft Seal Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
PC50MR2 Excavator Pump, PC50UU-2 Main Pump Excavator Main Pump, PC50MR-2 Hydraulic Pump | Cover End RPM [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Spline Description:2520V12A5-1AD22R; Pilot Type:2 1/2; Port Orientation - Shaft End:Flange; Pump Series:1/4 in; Shaft Seal Type:Standard Pilot; Port Type:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
PC120-3 hydraulic pump | Cover End RPM [Max:45.0 LB; Integral Valve Configuration:Flange Mount; Minor Diameter [Min:Right Hand (CW); Max. RPM [Max:2520V12A5-1AD22R; Shaft End Pressure [Max:2 1/2; Pilot Type:Flange; Rotation:1/4 in; Shaft Dia.:Standard Pilot; Port Size:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
Hyundai R450lc-7 Excavator Arm and Boom R450-7 Excavator Arm Assembly 61NB20102 | Shaft Key:45.0 LB; Max. RPM [Max:Flange Mount; Seal Material:Right Hand (CW); Manufacturer Part No.:2520V12A5-1AD22R; Shaft End Pressure [Max:2 1/2; Shaft Type:Flange; Port Orientation - Shaft End:1/4 in; Major Diameter [Min:Standard Pilot; Rotation:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
SK50 final drive kobelco excavator SK50 travel motor assy | Integral Valve Configuration:45.0 LB; Port Orientation - Cover End:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Shaft Dia.:2520V12A5-1AD22R; Mounting Flange:2 1/2; Shaft Type:Flange; Minor Diameter:1/4 in; Displacement Cover End (cu in/revolution):Standard Pilot; Seal Material:0.875 in; Shaft Length:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A5-1AD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.5; |
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
PC200-6E Main pump assembly, HPV95 hydraulic pump ,original rebuild or second hand Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hitachi hydraulic pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump