Home>Products>Hitachi hydraulic pump>PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction MODELS
Need a CAD or 3D Model?
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction
category
Hitachi hydraulic pump
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction Technical information
- 1.25 in
- Straight w/ Key
- 3520VQ
- 2.5 in
- Buna-N
- 2400
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 2500
- 2400
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
- 3520VQ35A11-1AA20LH
- 3000
- 3000
- 16.5
- 52.5
- w/o Integral Valves
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 3/4 in Flange
- 1 1/4 in Flange
- 2.22
- 6.88
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction Products and services
PSVD2 kayaba hydraulic pump parts,psvd2-21e,psvd2-17e-23,PSVD2 pump for vio55 | Cover End Pressure [Max:75.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Seal Material:Left Hand (CCW); Mounting Flange:3520VQ35A11-1AA20LH; Displacement Cover End (cu in/revolution):3; Cover End Flow @ RPM:Flange; Minor Diameter [Min:5/16 in; Pressure Port Size, Cover End:Standard Pilot; Pilot Type:1.25 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
Daewoo Excavator Drive Unit SL300-5 Final Drive SOLAR300-5 Travel Motor | Max. RPM [Max:75.0 LB; Minor Diameter [Max:Flange Mount; Seal Material:Left Hand (CCW); Shaft End Flow @ RPM:3520VQ35A11-1AA20LH; Port Size:3; Model No.:Flange; GPM @ 1,800 rpm, Shaft End:5/16 in; Shaft End Pressure [Max:Standard Pilot; Port Orientation - Cover End:1.25 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
EX120-5 hydraulic pump EX120 excavator hydraulic main pump | Pressure Port Size, Cover End:75.0 LB; Shaft Seal Type:Flange Mount; Minor Diameter:Left Hand (CCW); Pressure Port Size, Shaft End:3520VQ35A11-1AA20LH; Model No.:3; GPM @ 1,800 rpm, Cover End:Flange; Pump Series:5/16 in; Manufacturer Part No.:Standard Pilot; Pilot Type:1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
SQ5SK2Q swing bearing slewing circle SQ5SK2Q | Model No.:75.0 LB; Minor Diameter:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Shaft Dia.:3520VQ35A11-1AA20LH; Max. RPM [Max:3; Shaft Key:Flange; Minor Diameter [Max:5/16 in; Integral Valve Configuration:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
r140lc-7 travel motor, Hyundai r140lc-7 travel motor assy | Cover End Flow @ RPM:75.0 LB; Pilot Type:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Displacement Cover End (cu in/revolution):3520VQ35A11-1AA20LH; Shaft End Pressure [Max:3; Major Diameter [Min:Flange; Shaft End Flow @ RPM:5/16 in; Minor Diameter [Max:Standard Pilot; Shaft Length:1.25 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
PC300-7 hydraulic main pump parts,708-2G-00024 from Genuine Factory | Shaft Key:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Shaft Type:3520VQ35A11-1AA20LH; Pump Series:3; Shaft Dia.:Flange; Minor Diameter [Min:5/16 in; Relief Valve Setting:Standard Pilot; Port Size:1.25 in; Mounting Flange:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
kawasaki hydraulic pump,kawasaki k5v80dt hydraulic pump,piston pump | Model No.:75.0 LB; Major Diameter [Min:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Port Orientation - Shaft End:3520VQ35A11-1AA20LH; Seal Material:3; Minor Diameter:Flange; Displacement Shaft End (cu in/revolution):5/16 in; Shaft Length:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Rotation:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
Chinese supplier R210LC Swing motor,swing motor assy for R210LC,R210LC-7 | Mounting Flange:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Shaft Type:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3; Seal Material:Flange; Minor Diameter:5/16 in; Shaft End Pressure [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
PC40MR-1 fina drive assy,GM05, PC40MR-1 excavator travel motor assy ,PC30-7 PC50UU-2E PC75UU SK50UR | Manufacturer Part No.:75.0 LB; Pressure Port Size, Shaft End:Flange Mount; Spline Description:Left Hand (CCW); Port Orientation - Cover End:3520VQ35A11-1AA20LH; Seal Material:3; GPM @ 1,800 rpm, Shaft End:Flange; Minor Diameter [Max:5/16 in; Relief Valve Setting:Standard Pilot; Rotation:1.25 in; Port Type:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
KYB final drive assy,Kayaba travel motor for excavator MAG18VP MAG26VP MAG33VP MAG85VP MAG170VP | GPM @ 1,800 rpm, Cover End:75.0 LB; Shaft Length:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Seal Material:3520VQ35A11-1AA20LH; Shaft End Flow @ RPM:3; Port Orientation - Cover End:Flange; Shaft Key:5/16 in; Displacement Shaft End (cu in/revolution):Standard Pilot; Cover End RPM [Max:1.25 in; Model No.:Straight w/ Key; Pump Series:3520VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ35A11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:52.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):6.88; |
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
PC300-6 Excavator Swing Motor Gearbox PC300-6 Swing Reduction Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hitachi hydraulic pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump