Home>Products>Rexroth pump>PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 MODELS
Need a CAD or 3D Model?
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6
category
Rexroth pump
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 Systems
- 0.875 in
- 13 Tooth Splined
- V2020
- 1.3125 in
- Buna-N
- 3000
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 3000
- N/A
- 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- V2020-1F7S6S-11AA30
- 2500
- 2500
- 9
- 10.5
- N/A
- Outlet Opposite Inlet
- Outlet Opposite Inlet
- 3/4 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.19
- 1.39
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 Dimensions
gear pump pc300-6 704-24-26430 Excavator Gear Pump | Pressure Port Size, Shaft End:35.0 LB; Mounting:Flange Mount; Pilot Type:Right Hand (CW); Max. RPM [Max:V2020-1F7S6S-11AA30; Port Size:2; Shaft Type:Flange; Relief Valve Setting:N/A; Seal Material:N/A; Minor Diameter [Max:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
Custom cable assembly and wire harness | Port Orientation - Cover End:35.0 LB; Model No.:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Cover End RPM [Max:V2020-1F7S6S-11AA30; Displacement Cover End (cu in/revolution):2; Mounting:Flange; Rotation:N/A; Shaft End RPM [Max:N/A; Spline Description:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
High quality a large number of wholesale track shoe | Cover End Pressure [Max:35.0 LB; Minor Diameter [Min:Flange Mount; Controlled Flow Rate:Right Hand (CW); Port Orientation - Cover End:V2020-1F7S6S-11AA30; Shaft End Flow @ RPM:2; GPM @ 1,800 rpm, Shaft End:Flange; Pilot Type:N/A; Mounting:N/A; Displacement Cover End (cu in/revolution):0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
Pressure switch 206-06-61130 used in excavator parts | Shaft End Flow @ RPM:35.0 LB; Shaft End Pressure [Max:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Pump Series:V2020-1F7S6S-11AA30; Major Diameter [Max:2; Spline Description:Flange; Pilot Type:N/A; Minor Diameter:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
excavator travelling motor ,motor ass'y,final drive for excavator pc200-8 | Minor Diameter [Max:35.0 LB; Port Size:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Seal Type:V2020-1F7S6S-11AA30; Shaft Type:2; Minor Diameter:Flange; Shaft End Flow @ RPM:N/A; Minor Diameter [Min:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
China supplier excavator relief valve 723-40-71900, excavator spare parts | Controlled Flow Rate:35.0 LB; Shaft Dia.:Flange Mount; Spline Description:Right Hand (CW); Minor Diameter [Min:V2020-1F7S6S-11AA30; Mounting Flange:2; Minor Diameter [Max:Flange; Mounting:N/A; Shaft End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
hydraulic pilot valve for excavator original parts 702-21-57400 | Port Orientation - Cover End:35.0 LB; Minor Diameter:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Manufacturer Part No.:V2020-1F7S6S-11AA30; Displacement Cover End (cu in/revolution):2; Model No.:Flange; Minor Diameter [Min:N/A; Shaft End RPM [Max:N/A; Rotation:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
208-25-61100 pc400-7 pc450-6 slewing bearing for excavator | Minor Diameter [Max:35.0 LB; Max. RPM [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Major Diameter [Max:V2020-1F7S6S-11AA30; Seal Material:2; Port Orientation - Shaft End:Flange; Pilot Type:N/A; Manufacturer Part No.:N/A; Shaft Type:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
Excavator Bucket Teeth for Excavator | Shaft Seal Type:35.0 LB; Cover End Pressure [Max:Flange Mount; Port Size:Right Hand (CW); Integral Valve Configuration:V2020-1F7S6S-11AA30; Shaft End RPM [Max:2; Port Orientation - Shaft End:Flange; Seal Material:N/A; Shaft Key:N/A; Port Orientation - Cover End:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
controller for excavator SK120 YN22E00309F1 | Port Type:35.0 LB; Manufacturer Part No.:Flange Mount; Shaft Length:Right Hand (CW); Seal Material:V2020-1F7S6S-11AA30; Controlled Flow Rate:2; GPM @ 1,800 rpm, Cover End:Flange; Cover End Pressure [Max:N/A; Major Diameter [Max:N/A; Shaft Key:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2020; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S6S-11AA30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
PC128UU-1 TRAVEL MOTOR EXCAVATOR FINAL DRIVE PC75UU-2/PC75UU-1/PC100-6/PC120-6 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump