Home>Products>Rexroth pump>ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING)
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) MODELS
Need a CAD or 3D Model?
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING)
category
Rexroth pump
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) Systems
- 1.375 in
- Straight w/ Key
- 3525V
- 3.875 in
- Buna-N
- 1800
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 1800
- 1800
- N/A
- 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
- 3525V25A17-86AD22L
- 2500
- 2500
- 25.5
- 37.5
- N/A
- Outlet 135° CW from Inlet
- Outlet Opposite Inlet
- 1 in Code 61
- 1 1/4 in Code 61
- 3.4
- 4.9
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) Dimensions
Excavator spare part hydraulic parts Pump shaft center shaft | Port Orientation - Cover End:76.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft End RPM [Max:3525V25A17-86AD22L; Shaft Key:3; Minor Diameter [Min:Flange; Port Orientation - Shaft End:5/16 in; Cover End RPM [Max:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
PC40-7 excavator final drive with travel motor 20T-60-78120 | Pressure Port Size, Cover End:76.0 LB; Integral Valve Configuration:Flange Mount; Shaft Seal Type:Left Hand (CCW); Minor Diameter [Max:3525V25A17-86AD22L; Cover End Pressure [Max:3; Shaft Key:Flange; Shaft Length:5/16 in; Displacement Shaft End (cu in/revolution):Standard Pilot; Port Type:1.375 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
Loader rear axle gear box WA380-6 bridge shell inside of Deceleration planetary frame | Shaft Length:76.0 LB; Shaft Type:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Port Size:3525V25A17-86AD22L; Port Type:3; Pressure Port Size, Shaft End:Flange; Max. RPM [Max:5/16 in; Port Orientation - Cover End:Standard Pilot; Shaft End Flow @ RPM:1.375 in; Mounting Flange:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
hydraulic excavator swing motor/swing reducer assembly/swing gearbox for excavator | Mounting Flange:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Minor Diameter:3525V25A17-86AD22L; Shaft End Pressure [Max:3; GPM @ 1,800 rpm, Cover End:Flange; Pilot Type:5/16 in; Major Diameter [Max:Standard Pilot; Displacement Cover End (cu in/revolution):1.375 in; Max. RPM [Max:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
OEM good quality excavator bucket PC110/PC200/PC210 China supplier | Shaft End RPM [Max:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Major Diameter [Min:3525V25A17-86AD22L; Spline Description:3; Shaft Key:Flange; Shaft Type:5/16 in; Pilot Type:Standard Pilot; Seal Material:1.375 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
Excavator cab of new and used excavator cab sk200-8 | Shaft End RPM [Max:76.0 LB; Shaft Length:Flange Mount; Relief Valve Setting:Left Hand (CCW); Port Orientation - Cover End:3525V25A17-86AD22L; Displacement Cover End (cu in/revolution):3; Spline Description:Flange; Mounting:5/16 in; Shaft End Flow @ RPM:Standard Pilot; Model No.:1.375 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
PC300-6 swing motor assembly for excavator hydraulic motor | Shaft End Flow @ RPM:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Manufacturer Part No.:3525V25A17-86AD22L; Rotation:3; Pilot Type:Flange; Shaft Key:5/16 in; Integral Valve Configuration:Standard Pilot; Cover End Flow @ RPM:1.375 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
SK200 track link ass'y track shoes for excavator | Minor Diameter [Min:76.0 LB; Shaft Key:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Rotation:3525V25A17-86AD22L; GPM @ 1,800 rpm, Shaft End:3; Major Diameter [Min:Flange; Relief Valve Setting:5/16 in; Shaft Length:Standard Pilot; Shaft Type:1.375 in; Mounting Flange:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
bucket cylinder excavator for sale | Cover End RPM [Max:76.0 LB; Major Diameter [Min:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Major Diameter [Max:3525V25A17-86AD22L; Minor Diameter:3; Shaft Type:Flange; Max. RPM [Max:5/16 in; Mounting Flange:Standard Pilot; Port Size:1.375 in; Pilot Type:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
K5V200,for many kinds,hydraulic pump /piston pump | Shaft Length:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Size:Left Hand (CCW); Major Diameter [Min:3525V25A17-86AD22L; Shaft Key:3; Max. RPM [Max:Flange; Displacement Shaft End (cu in/revolution):5/16 in; Pressure Port Size, Cover End:Standard Pilot; Cover End RPM [Max:1.375 in; Seal Material:Straight w/ Key; Pump Series:3525V; Shaft Length:3.875 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9; |
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump