Home>Products>Rexroth pump>spare parts D375 track roller
spare parts D375 track roller
category
Rexroth pump
spare parts D375 track roller SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
spare parts D375 track roller Systems
- 1.5 in
- Straight w/ Key
- 4525V
- 3.4375 in
- Buna-N
- 1800
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 1800
- 1800
- N/A
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
- 4525V42A21-86AD22L
- 2500
- 2500
- 31.5
- 63
- N/A
- Outlet 135° CW from Inlet
- Outlet Opposite Inlet
- 1 in Code 61
- 1 1/2 in Code 61
- 4.1
- 8.4
spare parts D375 track roller Dimensions
ZX330-3 travel Gear reducer excavator spare parts final drive and travel motor | Pressure Port Size, Shaft End:101.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Minor Diameter:Left Hand (CCW); Spline Description:4525V42A21-86AD22L; Port Orientation - Shaft End:3 1/2; Mounting:Flange; Port Size:3/8 in; Major Diameter [Max:Standard Pilot; Mounting Flange:1.5 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
Excavator Swing reducer for pc200-7/speed reducer flender gearbox | Shaft End Pressure [Max:101.0 LB; Shaft End Flow @ RPM:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Max. RPM [Max:4525V42A21-86AD22L; Model No.:3 1/2; Pressure Port Size, Shaft End:Flange; Rotation:3/8 in; Relief Valve Setting:Standard Pilot; Pressure Port Size, Cover End:1.5 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
reduction gear box for excavator final drive | Pilot Type:101.0 LB; Mounting Flange:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Shaft End Pressure [Max:4525V42A21-86AD22L; GPM @ 1,800 rpm, Shaft End:3 1/2; Cover End Flow @ RPM:Flange; Relief Valve Setting:3/8 in; Spline Description:Standard Pilot; Pressure Port Size, Cover End:1.5 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
excavator parts and excavator cylinder, arm cylinder and bucket cylinder tubeE320B/E320BL/E320C/E320D/E320L/E322/ E330D | Pressure Port Size, Cover End:101.0 LB; Spline Description:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Model No.:4525V42A21-86AD22L; Relief Valve Setting:3 1/2; Cover End Pressure [Max:Flange; Weight:3/8 in; Cover End RPM [Max:Standard Pilot; Shaft Type:1.5 in; Pump Series:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
excavator piston 3017349 | Seal Material:101.0 LB; Pump Series:Flange Mount; Shaft Key:Left Hand (CCW); Shaft End Flow @ RPM:4525V42A21-86AD22L; GPM @ 1,800 rpm, Cover End:3 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Type:3/8 in; Shaft End RPM [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.5 in; Pilot Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
PC130-7 hydraulic pump solenoid valve | Spline Description:101.0 LB; Minor Diameter [Min:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Rotation:4525V42A21-86AD22L; Integral Valve Configuration:3 1/2; Shaft End RPM [Max:Flange; Weight:3/8 in; Shaft End Flow @ RPM:Standard Pilot; Displacement Shaft End (cu in/revolution):1.5 in; Shaft Length:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
Excavator engine of parts,bulldozer spare parts, bulldozer parts diesel engine | Major Diameter [Min:101.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Max:Left Hand (CCW); Seal Material:4525V42A21-86AD22L; Shaft Seal Type:3 1/2; Pilot Type:Flange; Port Orientation - Cover End:3/8 in; Shaft End Flow @ RPM:Standard Pilot; Cover End Flow @ RPM:1.5 in; Shaft Length:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
main valve for excavator and bulldozer parts,hydraulic control valve,relief valve,PC70,PC78-5,PC100-2,PC90-3,PC180,PC150 | Shaft Key:101.0 LB; Cover End Flow @ RPM:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Mounting Flange:4525V42A21-86AD22L; GPM @ 1,800 rpm, Cover End:3 1/2; Displacement Cover End (cu in/revolution):Flange; Minor Diameter:3/8 in; Port Orientation - Shaft End:Standard Pilot; Major Diameter [Max:1.5 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
Excavator parts --Air conditioner compressor | Shaft End RPM [Max:101.0 LB; Manufacturer Part No.:Flange Mount; Mounting:Left Hand (CCW); Displacement Shaft End (cu in/revolution):4525V42A21-86AD22L; Pump Series:3 1/2; Minor Diameter [Max:Flange; Pilot Type:3/8 in; Port Type:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.5 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
excavator operator door cab cabin | Rotation:101.0 LB; Minor Diameter [Min:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Cover End Pressure [Max:4525V42A21-86AD22L; Minor Diameter [Max:3 1/2; Weight:Flange; Port Orientation - Shaft End:3/8 in; Cover End Flow @ RPM:Standard Pilot; Shaft End RPM [Max:1.5 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:4525V; Shaft Length:3.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A21-86AD22L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):8.4; |
spare parts D375 track roller Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
spare parts D375 track roller Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump