Home>Products>Rexroth pump>Bus Wiper Motor for Wiper System
Bus Wiper Motor for Wiper System
category
Rexroth pump
Bus Wiper Motor for Wiper System SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bus Wiper Motor for Wiper System Systems
- 12 gpm @ 1200 rpm
- 0.73 in
- 11 Tooth Splined
- 18 gpm @ 1800 rpm
- V20
- 1 1/4 in
- Single
- 3/4 in NPT
- Buna-N
- 2400
- 2200 psi
- 18
- P
- SAE A, 2 Bolt
- P
- 1
- Inline w/ Inlet
- 2.4
- w/o Integral Valves
- 38C
Bus Wiper Motor for Wiper System Dimensions
Excavator part--undercarriage parts bucket teeth,idler and track roller | Weight:18.0 LB; Major Diameter [Max:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Displacement Shaft End (cu in/revolution):12 gal/min @ 1200 rpm; Mounting Flange:1.25; Minor Diameter:NPT; Max. RPM [Max:N/A; Relief Valve Setting:11; Shaft Seal Type:12 gpm @ 1200 rpm; Port Orientation - Shaft End:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
Excavator exhaust manifold 6735-11-5120 PC220-7 | Cover End Pressure [Max:18.0 LB; Integral Valve Configuration:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Max. RPM [Max:12 gal/min @ 1200 rpm; Controlled Flow Rate:1.25; Mounting Flange:NPT; Minor Diameter [Min:N/A; Weight:11; Port Orientation - Shaft End:12 gpm @ 1200 rpm; Port Size:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
AC 220V electric oil pump / electric transfer pump / AC 220V electric fuel pump | Relief Valve Setting:18.0 LB; Pilot Type:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Minor Diameter:12 gal/min @ 1200 rpm; Controlled Flow Rate:1.25; Shaft Key:NPT; Cover End Pressure [Max:N/A; Minor Diameter [Min:11; Manufacturer Part No.:12 gpm @ 1200 rpm; Pressure Port Size, Shaft End:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
stainless steel submersible pump main product | Pressure Port Size, Shaft End:18.0 LB; Shaft End RPM [Max:Flange Mount; Relief Valve Setting:Left Hand (CCW); Shaft Seal Type:12 gal/min @ 1200 rpm; Rotation:1.25; Port Size:NPT; Minor Diameter:N/A; Displacement Shaft End (cu in/revolution):11; Port Orientation - Cover End:12 gpm @ 1200 rpm; Weight:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
hydraulic pump excavator piston pump,K3V112DT,K3V63DT,K3V140DT,K5V80DT,K5V140DT,K3V180,SK200,SK210,SK230,R210 | Mounting:18.0 LB; Major Diameter [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft Key:12 gal/min @ 1200 rpm; Port Size:1.25; Seal Material:NPT; Model No.:N/A; Cover End RPM [Max:11; Integral Valve Configuration:12 gpm @ 1200 rpm; Minor Diameter [Max:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
hydraulic pump,PVD-2B-34P PVD-1B-32P,PVD-1B-36,PVD-3B-56,PVD-3B-60L,PVD-2B-36L | Shaft Length:18.0 LB; Controlled Flow Rate:Flange Mount; Minor Diameter [Min:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:12 gal/min @ 1200 rpm; Pilot Type:1.25; Major Diameter [Max:NPT; Shaft Seal Type:N/A; Mounting:11; Major Diameter [Min:12 gpm @ 1200 rpm; Pump Series:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
swing circles and swing bearing for excavator PC60,PC75,PC78.PC90,PC120,PC200-6,PC220-7,PC300-7,PC400 | Shaft Seal Type:18.0 LB; Port Orientation - Shaft End:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Model No.:12 gal/min @ 1200 rpm; Major Diameter [Max:1.25; Cover End Pressure [Max:NPT; Major Diameter [Min:N/A; Shaft Dia.:11; Shaft Length:12 gpm @ 1200 rpm; Weight:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) | Port Size:18.0 LB; Shaft Key:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Pump Series:12 gal/min @ 1200 rpm; Max. RPM [Max:1.25; Shaft Type:NPT; Mounting Flange:N/A; Pilot Type:11; GPM @ 1,800 rpm, Shaft End:12 gpm @ 1200 rpm; Controlled Flow Rate:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
excavator filter and fuel filter Air filter 600-185-4100 600-185-3100 600-185-6100 | Model No.:18.0 LB; Cover End Pressure [Max:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Cover End Flow @ RPM:12 gal/min @ 1200 rpm; Pump Series:1.25; Cover End RPM [Max:NPT; Major Diameter [Min:N/A; Pressure Port Size, Shaft End:11; Relief Valve Setting:12 gpm @ 1200 rpm; Pressure Port Size, Cover End:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
Piston Motor Parts, 6D14-T Connecting Rod | Shaft Dia.:18.0 LB; Mounting Flange:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Spline Description:12 gal/min @ 1200 rpm; Manufacturer Part No.:1.25; Port Type:NPT; Port Size:N/A; Cover End RPM [Max:11; Shaft Seal Type:12 gpm @ 1200 rpm; Shaft End RPM [Max:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:18 gpm @ 1800 rpm; Pump Series:V20; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:3/4 in NPT; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:18; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38C; |
Bus Wiper Motor for Wiper System Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Bus Wiper Motor for Wiper System Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump