Home>Products>Rexroth pump>Excavator PC300-7 Hydraulic Oil Tank
Excavator PC300-7 Hydraulic Oil Tank
category
Rexroth pump
Excavator PC300-7 Hydraulic Oil Tank SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Excavator PC300-7 Hydraulic Oil Tank Systems
- 1.25 in
- Straight w/ Key
- 4525VQ
- 1 15/16 in
- Buna-N
- 2200
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 2200
- 2200
- N/A
- 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
- 4525VQ60A17-1AA20
- 3000
- 2500
- 25.5
- 90
- w/o Integral Valves
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1 in Flange
- 1 1/2 in Flange
- 3.37
- 11.8
Excavator PC300-7 Hydraulic Oil Tank Dimensions
excavator spare parts pc200-7 excavators 6d102 engine assy | Port Orientation - Cover End:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft Type:Right Hand (CW); Max. RPM [Max:4525VQ60A17-1AA20; Port Orientation - Shaft End:3 1/2; Model No.:Flange; Cover End Pressure [Max:5/16 in; Minor Diameter [Min:Standard Pilot; Shaft Key:1.25 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
excavator gear box for travel motor, reduction box for excavator pc60/pc130/pc200/pc300/pc400 | Shaft End Pressure [Max:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter [Min:Right Hand (CW); Major Diameter [Min:4525VQ60A17-1AA20; Max. RPM [Max:3 1/2; Port Orientation - Shaft End:Flange; Spline Description:5/16 in; Controlled Flow Rate:Standard Pilot; Seal Material:1.25 in; Integral Valve Configuration:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
Excavator cab of new and used excavator cab sk200-8 | Displacement Shaft End (cu in/revolution):101.0 LB; Shaft Key:Flange Mount; Model No.:Right Hand (CW); Shaft Type:4525VQ60A17-1AA20; Pressure Port Size, Shaft End:3 1/2; Major Diameter [Min:Flange; Pressure Port Size, Cover End:5/16 in; Shaft End Pressure [Max:Standard Pilot; Mounting:1.25 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
cylinder head for 6D125 engine , 6D125 engine parts OEM high quality cylinder head for sale | Major Diameter [Max:101.0 LB; Minor Diameter [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Spline Description:4525VQ60A17-1AA20; Minor Diameter:3 1/2; Mounting Flange:Flange; Shaft Seal Type:5/16 in; Controlled Flow Rate:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Relief Valve Setting:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
CX210 swing reduction gearbox for Case excavator | Spline Description:101.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Relief Valve Setting:Right Hand (CW); Mounting:4525VQ60A17-1AA20; Integral Valve Configuration:3 1/2; Cover End Pressure [Max:Flange; Shaft Dia.:5/16 in; Cover End RPM [Max:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
Chinese supplier aftermarket Excavator Hydraulic Oil Cylinder spare parts hot sale | Manufacturer Part No.:101.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Type:Right Hand (CW); Minor Diameter:4525VQ60A17-1AA20; Major Diameter [Max:3 1/2; Weight:Flange; Shaft End RPM [Max:5/16 in; Port Type:Standard Pilot; Minor Diameter [Max:1.25 in; Shaft Length:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
Fuel Stop Solenoid Valve,Diesel Fuel Shut Off Solenoid Valve assy | Model No.:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Seal Type:4525VQ60A17-1AA20; Major Diameter [Max:3 1/2; Shaft End RPM [Max:Flange; Pump Series:5/16 in; Cover End Pressure [Max:Standard Pilot; Mounting:1.25 in; Port Orientation - Cover End:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
backhoes arm /bucket/ boom cylinder for excavators/ dozers | Shaft Type:101.0 LB; Mounting Flange:Flange Mount; Port Type:Right Hand (CW); Major Diameter [Max:4525VQ60A17-1AA20; Integral Valve Configuration:3 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Port Orientation - Cover End:5/16 in; Shaft Length:Standard Pilot; Model No.:1.25 in; Shaft Key:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
A10V28 hydraulic piston pump | Pressure Port Size, Shaft End:101.0 LB; Major Diameter [Max:Flange Mount; Mounting Flange:Right Hand (CW); Shaft Length:4525VQ60A17-1AA20; Shaft Type:3 1/2; Minor Diameter:Flange; Major Diameter [Min:5/16 in; Minor Diameter [Min:Standard Pilot; Cover End Flow @ RPM:1.25 in; Port Type:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
62305 2RS slewing ring bearings cheap price | Shaft End Flow @ RPM:101.0 LB; Shaft End Pressure [Max:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Mounting:4525VQ60A17-1AA20; Port Size:3 1/2; Spline Description:Flange; Shaft Type:5/16 in; Shaft Length:Standard Pilot; Seal Material:1.25 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8; |
Excavator PC300-7 Hydraulic Oil Tank Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Excavator PC300-7 Hydraulic Oil Tank Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump