Home>Products>Rexroth pump>Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 MODELS
Need a CAD or 3D Model?
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118
category
Rexroth pump
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 Systems
- 0.875 in
- Straight w/ Key
- V2010
- 2 5/16 in
- Buna-N
- 2400
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 3000
- 2400
- N/A
- 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
- V2010-1F12S4S-1AA12-LH
- 2500
- 2200
- 6
- 18
- N/A
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.8
- 2.38
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 Dimensions
genuine and replacement GM09 excavator travel motor/final drive complete for PC100-6 /PC120-6 /PC128UU-1/PC130-7 | GPM @ 1,800 rpm, Cover End:30.0 LB; Mounting:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Rotation:V2010-1F12S4S-1AA12-LH; Port Orientation - Cover End:1 1/2; Controlled Flow Rate:Flange; Minor Diameter [Max:3/16 in; Pressure Port Size, Cover End:N/A; Port Orientation - Shaft End:0.875 in; Shaft Length:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
pc300-7 factory direct sale starting motor 600-863-5111 | Manufacturer Part No.:30.0 LB; Port Type:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Port Size:V2010-1F12S4S-1AA12-LH; Cover End Flow @ RPM:1 1/2; Relief Valve Setting:Flange; Port Orientation - Shaft End:3/16 in; Pressure Port Size, Cover End:N/A; Max. RPM [Max:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
PC200-5 swivel joint ass'y, 703-09-33100, excavator parts | Cover End RPM [Max:30.0 LB; Mounting:Flange Mount; Spline Description:Left Hand (CCW); Shaft Key:V2010-1F12S4S-1AA12-LH; Max. RPM [Max:1 1/2; Model No.:Flange; Pressure Port Size, Shaft End:3/16 in; Shaft Dia.:N/A; Port Orientation - Shaft End:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
original EX330-1excavator driver's cab assy EX330-1 cabin | Cover End Flow @ RPM:30.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Key:Left Hand (CCW); Port Orientation - Cover End:V2010-1F12S4S-1AA12-LH; Mounting Flange:1 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft Type:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Spline Description:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
PC400 PC450-7 final drive excavator travel motor | Port Type:30.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Rotation:V2010-1F12S4S-1AA12-LH; Shaft Seal Type:1 1/2; Shaft Key:Flange; Shaft End RPM [Max:3/16 in; Shaft Length:N/A; Major Diameter [Min:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
genuine and china hydraulic pump 702-21-57400 solenoid valve | Pump Series:30.0 LB; Cover End RPM [Max:Flange Mount; Shaft Seal Type:Left Hand (CCW); Mounting:V2010-1F12S4S-1AA12-LH; Shaft End Flow @ RPM:1 1/2; Minor Diameter [Min:Flange; Shaft Type:3/16 in; Major Diameter [Max:N/A; Mounting Flange:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
excavator travel motor ,motor ass'y,final drive PC300-6 | Minor Diameter:30.0 LB; Minor Diameter [Min:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Pilot Type:V2010-1F12S4S-1AA12-LH; Major Diameter [Min:1 1/2; Manufacturer Part No.:Flange; Pump Series:3/16 in; Minor Diameter [Max:N/A; Model No.:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
PC300-7 Genuine excavator hydraulic pump assy part number 708-2G-00024, excavator original parts | Model No.:30.0 LB; Shaft Type:Flange Mount; Minor Diameter [Max:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:V2010-1F12S4S-1AA12-LH; Port Orientation - Cover End:1 1/2; Port Type:Flange; Major Diameter [Max:3/16 in; Pump Series:N/A; Major Diameter [Min:0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
Excavator idler cushion- recoil spring for pc200 PC220 sold in China | Mounting Flange:30.0 LB; Shaft End RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Cover End Flow @ RPM:V2010-1F12S4S-1AA12-LH; Shaft Length:1 1/2; Pump Series:Flange; Cover End RPM [Max:3/16 in; Spline Description:N/A; Shaft Seal Type:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
ENGINE OVERHAUL GASKET KIT, Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) | Port Orientation - Shaft End:30.0 LB; Shaft Dia.:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Port Type:V2010-1F12S4S-1AA12-LH; Port Size:1 1/2; Pressure Port Size, Shaft End:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Integral Valve Configuration:N/A; Seal Material:0.875 in; Rotation:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S4S-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.38; |
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Bulldozer/Excavator SD13/SD16/SD22/SD23/SD32 bulldozer original front idler 150-30-22118 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump