• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8

  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8
  • SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8

category

excavator

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 Technical information

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17A8-11DC20
  • 3000
  • 3000
  • 12
  • 25.5
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.67
  • 3.37

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 Products and services

 

Top Quality Starter Motor 4D95 Starting Motor 600-863-3110 for PC60-7 PC200-6Shaft End Pressure [Max:45.0 LB; Shaft Length:Flange Mount; Seal Material:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ17A8-11DC20; Port Size:2 1/2; Shaft End Flow @ RPM:Flange; Pressure Port Size, Shaft End:N/A; Pump Series:Standard Pilot; Minor Diameter [Min:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
Oil radiator PC50-5 water radiator for komatsvu excavator partsRelief Valve Setting:45.0 LB; Pilot Type:Flange Mount; Mounting Flange:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ17A8-11DC20; Cover End RPM [Max:2 1/2; Shaft Dia.:Flange; Manufacturer Part No.:N/A; Pressure Port Size, Cover End:Standard Pilot; Seal Material:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
Oil radiator SK210LC-8 water radiator for kobelco excavator partsMinor Diameter [Max:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Major Diameter [Min:Right Hand (CW); Model No.:2520VQ17A8-11DC20; Port Orientation - Shaft End:2 1/2; Pressure Port Size, Shaft End:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Cover End Pressure [Max:Standard Pilot; Cover End RPM [Max:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
S4D87E-1 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC56-7Port Type:45.0 LB; Pump Series:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Model No.:2520VQ17A8-11DC20; GPM @ 1,800 rpm, Shaft End:2 1/2; Displacement Cover End (cu in/revolution):Flange; Minor Diameter:N/A; Pilot Type:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
For Komatsu Excavator PC300-7 Engine Filter Ass'Y 6151-71-7201 6D114 Engine Parts PC360-7Model No.:45.0 LB; Cover End RPM [Max:Flange Mount; Controlled Flow Rate:Right Hand (CW); Shaft Type:2520VQ17A8-11DC20; Minor Diameter [Min:2 1/2; Shaft End Flow @ RPM:Flange; Minor Diameter [Max:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft Seal Type:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
Hydraulic Main Pump For Hitachi Excavator ZX30U-2 and Spare PartsDisplacement Shaft End (cu in/revolution):45.0 LB; Cover End RPM [Max:Flange Mount; Seal Material:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ17A8-11DC20; Minor Diameter [Min:2 1/2; Model No.:Flange; Pilot Type:N/A; Max. RPM [Max:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
D12D Engine Cylinder Liner Kit Piston Piston Ring for Volvo Excavator EC360BCover End Flow @ RPM:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Max. RPM [Max:Right Hand (CW); Port Orientation - Cover End:2520VQ17A8-11DC20; Controlled Flow Rate:2 1/2; Shaft End Flow @ RPM:Flange; Manufacturer Part No.:N/A; Pump Series:Standard Pilot; Seal Material:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
Hydraulic Main Pump For Hitachi Excavator EX200-2 and Spare PartsMounting:45.0 LB; Seal Material:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ17A8-11DC20; Port Orientation - Cover End:2 1/2; Pressure Port Size, Shaft End:Flange; Shaft Length:N/A; Cover End RPM [Max:Standard Pilot; Weight:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
S6D108-1 Oil Pump 6221-51-1100 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Manufacturer Part No.:45.0 LB; Major Diameter [Min:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Spline Description:2520VQ17A8-11DC20; Shaft End Flow @ RPM:2 1/2; Controlled Flow Rate:Flange; Shaft Length:N/A; Port Orientation - Cover End:Standard Pilot; Seal Material:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;
6D22T Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD1250-7Major Diameter [Min:45.0 LB; Controlled Flow Rate:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft Dia.:2520VQ17A8-11DC20; Max. RPM [Max:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Seal Material:N/A; Pressure Port Size, Shaft End:Standard Pilot; Pump Series:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37;

 

 

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed SAA6D125 Engine Exhaust Valve 6150-42-4210 for Komatsu Excavator PC400-8 PC450-8 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us