• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55

  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55

category

excavator

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 Technical information

  • 0.875 in
  • Straight w/ Key
  • 2520VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520VQ17C11-1AA20LH
  • 3000
  • 3000
  • 16.5
  • 25.5
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 1/16 in SAE O-Ring
  • 1 5/16 in SAE O-Ring
  • 2.22
  • 3.37

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 Products and services

 

parker pump PV063 piston pump for parkerCover End Flow @ RPM:45.0 LB; Shaft End RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Port Orientation - Shaft End:2520VQ17C11-1AA20LH; Minor Diameter [Min:2 1/2; Major Diameter [Max:Flange; Pressure Port Size, Cover End:3/16 in; Shaft End Flow @ RPM:Standard Pilot; Cover End Pressure [Max:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
4D21 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD400/450GPM @ 1,800 rpm, Cover End:45.0 LB; Weight:Flange Mount; Mounting Flange:Left Hand (CCW); Model No.:2520VQ17C11-1AA20LH; Minor Diameter [Min:2 1/2; Cover End Flow @ RPM:Flange; Spline Description:3/16 in; Max. RPM [Max:Standard Pilot; Shaft End Pressure [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
6D34T Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK230-6EPort Size:45.0 LB; Manufacturer Part No.:Flange Mount; Port Type:Left Hand (CCW); Max. RPM [Max:2520VQ17C11-1AA20LH; Controlled Flow Rate:2 1/2; Shaft Type:Flange; Pilot Type:3/16 in; Port Orientation - Shaft End:Standard Pilot; Mounting:0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
For Komatsu Excavator PC200-8 Engine Cooling Fan 600-625-7620 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Cover End Flow @ RPM:45.0 LB; Relief Valve Setting:Flange Mount; Seal Material:Left Hand (CCW); Controlled Flow Rate:2520VQ17C11-1AA20LH; Mounting:2 1/2; Shaft Key:Flange; Major Diameter [Min:3/16 in; Minor Diameter [Min:Standard Pilot; Major Diameter [Max:0.875 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Hydraulic Main Pump For Hitachi Excavator EX200-2 and Spare PartsShaft End Pressure [Max:45.0 LB; Shaft Key:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Seal Material:2520VQ17C11-1AA20LH; Integral Valve Configuration:2 1/2; Model No.:Flange; Pump Series:3/16 in; Weight:Standard Pilot; Cover End Pressure [Max:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Top Quality WA450-3 Engine Alternator 600-821-7220 S6D125 Engine PartsShaft Length:45.0 LB; Pilot Type:Flange Mount; Rotation:Left Hand (CCW); Major Diameter [Max:2520VQ17C11-1AA20LH; Cover End Pressure [Max:2 1/2; Integral Valve Configuration:Flange; Mounting:3/16 in; Minor Diameter [Min:Standard Pilot; Spline Description:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
S6D125 Starter Motor Starting Motor 600-813-6632 for Komatsu Excavator PC400-7Major Diameter [Min:45.0 LB; Controlled Flow Rate:Flange Mount; Mounting Flange:Left Hand (CCW); Relief Valve Setting:2520VQ17C11-1AA20LH; GPM @ 1,800 rpm, Cover End:2 1/2; Shaft Key:Flange; Integral Valve Configuration:3/16 in; Port Type:Standard Pilot; Cover End Pressure [Max:0.875 in; Shaft Seal Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
6D125 Engine Parts Alternator 600-825-6250 for Komatsu WA450Minor Diameter:45.0 LB; Shaft End RPM [Max:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Relief Valve Setting:2520VQ17C11-1AA20LH; Minor Diameter [Max:2 1/2; Shaft Seal Type:Flange; Port Size:3/16 in; Manufacturer Part No.:Standard Pilot; Major Diameter [Max:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
Oil radiator DH370LC-9 water radiator for DEAWOO DOOSAN excavator partsMinor Diameter [Min:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Mounting:Left Hand (CCW); Cover End RPM [Max:2520VQ17C11-1AA20LH; Shaft End Pressure [Max:2 1/2; Cover End Flow @ RPM:Flange; Controlled Flow Rate:3/16 in; Integral Valve Configuration:Standard Pilot; Port Type:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;
SAA6D107 Oil Pump 6754-51-1111 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Major Diameter [Min:45.0 LB; Model No.:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Relief Valve Setting:2520VQ17C11-1AA20LH; Shaft End Pressure [Max:2 1/2; Pilot Type:Flange; Pressure Port Size, Shaft End:3/16 in; Port Size:Standard Pilot; Shaft End Flow @ RPM:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17C11-1AA20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 5/16 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):3.37;

 

 

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH55 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us