• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150

  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150
  • DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150

category

excavator

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 4525VQ
  • 1.9375 in
  • 11.8
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
  • 4525VQ60A21-11CC20
  • 3000
  • 2500
  • 31.5
  • 90
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 4.1

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 Products and services

 

high quality excavator carrier upper roller DH370-9 for Daewoo excavator undercarriage partsPilot Type:101.0 LB; Model No.:Flange Mount; Weight:Right Hand (CW); Cover End Flow @ RPM:4525VQ60A21-11CC20; Shaft Seal Type:3.5; Displacement Cover End (cu in/revolution):Flange; Shaft Key:N/A; Shaft End Pressure [Max:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Rotation:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
For Komatsu Excavator PC200-8 Engine Fan Belt 6732-81-3531 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Mounting Flange:101.0 LB; Model No.:Flange Mount; Weight:Right Hand (CW); Displacement Cover End (cu in/revolution):4525VQ60A21-11CC20; Controlled Flow Rate:3.5; Major Diameter [Min:Flange; Shaft End Pressure [Max:N/A; Minor Diameter [Min:Standard Pilot; Shaft Type:1.25 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
4BD1T Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH120Max. RPM [Max:101.0 LB; Mounting:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Major Diameter [Max:4525VQ60A21-11CC20; Relief Valve Setting:3.5; Port Size:Flange; Manufacturer Part No.:N/A; Seal Material:Standard Pilot; Model No.:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
Top Quality Starter Motor S6D108 Starting Motor 600-813-6510 for WA300-8 WA380-3GPM @ 1,800 rpm, Cover End:101.0 LB; Integral Valve Configuration:Flange Mount; Port Size:Right Hand (CW); Shaft End Flow @ RPM:4525VQ60A21-11CC20; Port Orientation - Shaft End:3.5; Rotation:Flange; Pressure Port Size, Cover End:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Weight:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
high quality carrier roller ZX230 for Hitachi excavator undercarriage partsDisplacement Cover End (cu in/revolution):101.0 LB; Shaft Key:Flange Mount; Mounting Flange:Right Hand (CW); Shaft End RPM [Max:4525VQ60A21-11CC20; Rotation:3.5; GPM @ 1,800 rpm, Cover End:Flange; Pilot Type:N/A; Major Diameter [Min:Standard Pilot; Shaft Seal Type:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
Oil radiator 935D water radiator for CLG liugong excavator partsRelief Valve Setting:101.0 LB; Controlled Flow Rate:Flange Mount; Max. RPM [Max:Right Hand (CW); Minor Diameter:4525VQ60A21-11CC20; Pilot Type:3.5; Model No.:Flange; Displacement Cover End (cu in/revolution):N/A; Port Type:Standard Pilot; Mounting Flange:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270Manufacturer Part No.:101.0 LB; Mounting Flange:Flange Mount; Controlled Flow Rate:Right Hand (CW); Mounting:4525VQ60A21-11CC20; Max. RPM [Max:3.5; Displacement Cover End (cu in/revolution):Flange; Pilot Type:N/A; Shaft Seal Type:Standard Pilot; Minor Diameter [Max:1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
4D21 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD400/450Shaft Length:101.0 LB; Shaft Type:Flange Mount; Mounting:Right Hand (CW); Port Orientation - Shaft End:4525VQ60A21-11CC20; Controlled Flow Rate:3.5; Minor Diameter [Min:Flange; Cover End Pressure [Max:N/A; Minor Diameter [Max:Standard Pilot; Port Type:1.25 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
J08E Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK350-8Seal Material:101.0 LB; Shaft Type:Flange Mount; Pilot Type:Right Hand (CW); Pressure Port Size, Shaft End:4525VQ60A21-11CC20; Model No.:3.5; Displacement Shaft End (cu in/revolution):Flange; Shaft Dia.:N/A; Port Orientation - Shaft End:Standard Pilot; Rotation:1.25 in; Port Size:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;
Hydraulic Main Pump For Hitachi Excavator EX120-6 and Spare PartsShaft Seal Type:101.0 LB; Weight:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft Key:4525VQ60A21-11CC20; Integral Valve Configuration:3.5; Shaft Type:Flange; Shaft End Pressure [Max:N/A; Minor Diameter [Min:Standard Pilot; Shaft Length:1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A21-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):11.8;

 

 

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed DB58 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH150 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us