• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270

  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270
  • H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270

category

excavator

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 Technical information

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1.375 in
  • Double
  • Buna-N
  • 2700
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2700
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520VQ12A11-11AA20-LH
  • 3000
  • 3000
  • 16.5
  • 18
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.2

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 Products and services

 

excavator swing travel gearbox for Hyundai R320LC-7 R320LC-7A 31N9-40022 31N8-40072Rotation:45.0 LB; Port Orientation - Shaft End:Flange Mount; Minor Diameter:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:2520VQ12A11-11AA20-LH; Port Orientation - Cover End:2.5; Shaft End Flow @ RPM:Flange; Shaft Seal Type:N/A; Shaft Dia.:Standard Pilot; Pump Series:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
Oil radiator R485LC-9 water radiator for Hyundai excavator partsSpline Description:45.0 LB; Model No.:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Shaft Type:2520VQ12A11-11AA20-LH; GPM @ 1,800 rpm, Shaft End:2.5; Shaft Length:Flange; Pressure Port Size, Shaft End:N/A; Manufacturer Part No.:Standard Pilot; Shaft End RPM [Max:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
high quality 20 ton hydraulic cylinder R200 for hyundai manufacturerPort Size:45.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Min:Left Hand (CCW); Integral Valve Configuration:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:2.5; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Max:N/A; Port Orientation - Cover End:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
Oil radiator SY335C-8 water radiator for SANY excavator partsPilot Type:45.0 LB; Port Orientation - Shaft End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Shaft Seal Type:2520VQ12A11-11AA20-LH; Seal Material:2.5; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Cover End:N/A; Pressure Port Size, Cover End:Standard Pilot; Cover End RPM [Max:0.875 in; Pump Series:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
Oil radiator YC60-8 water radiator for Hyundai excavator partsShaft Dia.:45.0 LB; Seal Material:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Weight:2520VQ12A11-11AA20-LH; Model No.:2.5; Shaft End RPM [Max:Flange; Cover End Pressure [Max:N/A; Integral Valve Configuration:Standard Pilot; Cover End RPM [Max:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
For Komatsu Excavator PC300-7 Engine Flywheel Assembly 6741-31-4100 6D114 Engine Parts PC360-7Mounting Flange:45.0 LB; Mounting:Flange Mount; Minor Diameter:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:2520VQ12A11-11AA20-LH; Minor Diameter [Min:2.5; Major Diameter [Min:Flange; Spline Description:N/A; Cover End RPM [Max:Standard Pilot; Max. RPM [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
high quality piston hydraulic cylinder PC300 manufacturerPressure Port Size, Shaft End:45.0 LB; Port Size:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Integral Valve Configuration:2520VQ12A11-11AA20-LH; Port Orientation - Cover End:2.5; Max. RPM [Max:Flange; Cover End RPM [Max:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Minor Diameter [Min:0.875 in; Pump Series:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
high quality hydraulic piston cylinder for CAT 120 manufacturerMajor Diameter [Max:45.0 LB; Mounting Flange:Flange Mount; Shaft Key:Left Hand (CCW); Minor Diameter [Max:2520VQ12A11-11AA20-LH; Integral Valve Configuration:2.5; Cover End Flow @ RPM:Flange; Shaft End Pressure [Max:N/A; Shaft Type:Standard Pilot; Minor Diameter:0.875 in; Port Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
6D125 Starter Motor Starting Motor 600-813-6612 for Komatsu Bulldozer D65Pressure Port Size, Cover End:45.0 LB; Minor Diameter [Min:Flange Mount; Minor Diameter:Left Hand (CCW); Port Orientation - Cover End:2520VQ12A11-11AA20-LH; Pilot Type:2.5; Model No.:Flange; Shaft Key:N/A; Max. RPM [Max:Standard Pilot; Major Diameter [Max:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;
Oil radiator DH340 water radiator for DEAWOO DOOSAN excavator partsShaft Length:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ12A11-11AA20-LH; Integral Valve Configuration:2.5; Cover End RPM [Max:Flange; Displacement Cover End (cu in/revolution):N/A; Major Diameter [Max:Standard Pilot; Shaft End RPM [Max:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.5;

 

 

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed H06CT-1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX270 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us