• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7

  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7
  • SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7

category

excavator

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1.9375 in
  • Double
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525VQ25A21-11CC20-LH
  • 3000
  • 3000
  • 31.5
  • 37.5
  • 5
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.1

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 Products and services

 

For Komatsu Excavator PC300-7 Engine Front Gear Cover 6741-21-3310 6D114 Engine Parts PC360-7GPM @ 1,800 rpm, Shaft End:76.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Pump Series:3525VQ25A21-11CC20-LH; Seal Material:3; Weight:Flange; Controlled Flow Rate:N/A; Pressure Port Size, Shaft End:Standard Pilot; Shaft End Pressure [Max:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
6B5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R260-5Cover End Flow @ RPM:76.0 LB; Minor Diameter:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Shaft Dia.:3525VQ25A21-11CC20-LH; Port Orientation - Cover End:3; Port Orientation - Shaft End:Flange; Weight:N/A; Integral Valve Configuration:Standard Pilot; Cover End Pressure [Max:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
Oil radiator SY335C-8 water radiator for SANY excavator partsPilot Type:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11CC20-LH; Cover End RPM [Max:3; Controlled Flow Rate:Flange; Minor Diameter [Max:N/A; Shaft End Pressure [Max:Standard Pilot; Major Diameter [Max:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
6D95L Engine Parts Alternator 600-821-6140 for Komatsu D31GPM @ 1,800 rpm, Cover End:76.0 LB; Port Size:Flange Mount; Major Diameter [Min:Left Hand (CCW); Minor Diameter [Max:3525VQ25A21-11CC20-LH; Mounting:3; Pump Series:Flange; Port Orientation - Cover End:N/A; Cover End Pressure [Max:Standard Pilot; Port Orientation - Shaft End:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
S6D108 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC350Port Type:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Shaft Length:3525VQ25A21-11CC20-LH; GPM @ 1,800 rpm, Cover End:3; Cover End Flow @ RPM:Flange; Integral Valve Configuration:N/A; Cover End RPM [Max:Standard Pilot; Manufacturer Part No.:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
For Komatsu Excavator PC200-8 Engine Cylinder Block Assembly 6754-21-1310 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Pressure Port Size, Shaft End:76.0 LB; Port Orientation - Shaft End:Flange Mount; Shaft Key:Left Hand (CCW); Pilot Type:3525VQ25A21-11CC20-LH; Shaft End Pressure [Max:3; Port Type:Flange; Max. RPM [Max:N/A; Minor Diameter:Standard Pilot; Mounting Flange:1.25 in; Major Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
Oil radiator A934B water radiator for Liebherr excavator partsMinor Diameter [Min:76.0 LB; Major Diameter [Max:Flange Mount; Spline Description:Left Hand (CCW); Major Diameter [Min:3525VQ25A21-11CC20-LH; GPM @ 1,800 rpm, Shaft End:3; Shaft Key:Flange; Minor Diameter [Max:N/A; Model No.:Standard Pilot; Relief Valve Setting:1.25 in; Port Orientation - Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
6D105 Starter Motor Starting Motor 600-813-3650 for Komatsu Wheel Loader WA400-1 WA300-1Weight:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Type:Left Hand (CCW); Pilot Type:3525VQ25A21-11CC20-LH; Minor Diameter:3; Displacement Cover End (cu in/revolution):Flange; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Port Size:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
6D108 Engine Parts Alternator 600-821-9360 for Komatsu WA420-3 WA380-3Major Diameter [Min:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Type:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11CC20-LH; Shaft End Flow @ RPM:3; Model No.:Flange; Rotation:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Dia.:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;
Hydraulic Main Pump For Hitachi Excavator EX75UR and Spare PartsSeal Material:76.0 LB; Port Size:Flange Mount; Model No.:Left Hand (CCW); Shaft Length:3525VQ25A21-11CC20-LH; Shaft Dia.:3; Displacement Shaft End (cu in/revolution):Flange; Cover End Pressure [Max:N/A; Manufacturer Part No.:Standard Pilot; Minor Diameter [Max:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.1; Displacement Shaft End (cu in/revolution):5;

 

 

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us