• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts

  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts
  • high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts

category

excavator

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 3000
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 3000
  • N/A
  • 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
  • V2010-1F6S3S-11CC12L
  • 2500
  • 2500
  • 4.5
  • 9
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.6
  • 1.19

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts Products and services

 

Oil radiator ZX60 water radiator for hitaichi excavator partsCover End RPM [Max:30.0 LB; Manufacturer Part No.:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Major Diameter [Min:V2010-1F6S3S-11CC12L; Shaft End Flow @ RPM:1 1/2; Shaft Type:Flange; GPM @ 1,800 rpm, Cover End:N/A; Rotation:N/A; Shaft End RPM [Max:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
4D31T Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH145UShaft Length:30.0 LB; Shaft Type:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Minor Diameter [Min:V2010-1F6S3S-11CC12L; Shaft Key:1 1/2; Controlled Flow Rate:Flange; Minor Diameter:N/A; Displacement Shaft End (cu in/revolution):N/A; Pump Series:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
6WG1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX450-3 ZX450-3Max. RPM [Max:30.0 LB; Seal Material:Flange Mount; Pilot Type:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:V2010-1F6S3S-11CC12L; Shaft Dia.:1 1/2; Port Orientation - Shaft End:Flange; Pressure Port Size, Shaft End:N/A; Shaft End RPM [Max:N/A; Port Size:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
Hydraulic Pump Parts A10VSO28 for RexrothCover End RPM [Max:30.0 LB; Minor Diameter [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); GPM @ 1,800 rpm, Cover End:V2010-1F6S3S-11CC12L; Minor Diameter:1 1/2; Minor Diameter [Min:Flange; Shaft End Pressure [Max:N/A; Mounting:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
Oil radiator A944B water radiator for Liebherr excavator partsPort Orientation - Cover End:30.0 LB; Relief Valve Setting:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Mounting:V2010-1F6S3S-11CC12L; Shaft Dia.:1 1/2; Pump Series:Flange; Integral Valve Configuration:N/A; Cover End RPM [Max:N/A; Shaft End Flow @ RPM:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
excavator uchida AP2D25 hydraulic pump for hyundai 60 main pumpMinor Diameter [Min:30.0 LB; Weight:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Max. RPM [Max:V2010-1F6S3S-11CC12L; GPM @ 1,800 rpm, Shaft End:1 1/2; Displacement Cover End (cu in/revolution):Flange; Mounting Flange:N/A; Pilot Type:N/A; Mounting:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
C8.3-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R275LC-9Model No.:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Major Diameter [Min:V2010-1F6S3S-11CC12L; Displacement Cover End (cu in/revolution):1 1/2; Controlled Flow Rate:Flange; Pressure Port Size, Cover End:N/A; Major Diameter [Max:N/A; Shaft End Pressure [Max:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120 ZX120Displacement Cover End (cu in/revolution):30.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Length:Left Hand (CCW); Port Size:V2010-1F6S3S-11CC12L; Minor Diameter:1 1/2; Shaft Key:Flange; Port Orientation - Cover End:N/A; Relief Valve Setting:N/A; Pressure Port Size, Cover End:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
Top Quality GD305 Engine Alternator 600-821-7520 6D95 Engine PartsMinor Diameter [Max:30.0 LB; Controlled Flow Rate:Flange Mount; Shaft Key:Left Hand (CCW); Model No.:V2010-1F6S3S-11CC12L; Mounting Flange:1 1/2; Cover End RPM [Max:Flange; Displacement Shaft End (cu in/revolution):N/A; Major Diameter [Min:N/A; Weight:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;
high quality excavator carrier roller SH220-2 for Sumitomo excavator undercarriage partsMinor Diameter [Max:30.0 LB; Seal Material:Flange Mount; Port Size:Left Hand (CCW); Pressure Port Size, Shaft End:V2010-1F6S3S-11CC12L; Shaft Dia.:1 1/2; Model No.:Flange; Minor Diameter [Min:N/A; Integral Valve Configuration:N/A; Spline Description:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F6S3S-11CC12L; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:9; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.19;

 

 

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed high quality excavator upper roller DH300-7 for Daewoo excavator undercarriage parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us