• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts

  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts
  • high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts

category

excavator

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts Technical information

  • 1.375 in
  • 14 Tooth Splined
  • 3520V
  • 2.3125 in
  • Double
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3520V25A11-11CC22R
  • 3000
  • 4.9
  • 16.5
  • 37.5
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Code 61
  • 1 1/4 in Code 61
  • 2.2

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts Products and services

 

Oil radiator SH100 water radiator for sumitomo excavator partsShaft Length:75.0 LB; Cover End Pressure [Max:Flange Mount; Mounting:Right Hand (CW); Controlled Flow Rate:3520V25A11-11CC22R; Weight:3; Shaft Seal Type:Flange; Rotation:N/A; Pilot Type:Standard Pilot; Shaft Type:1.375 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
high quality excavator hydraulic arm cylinder R220-5 for hyundai manufacturerManufacturer Part No.:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Max:3520V25A11-11CC22R; Shaft End RPM [Max:3; Port Orientation - Cover End:Flange; Seal Material:N/A; Mounting Flange:Standard Pilot; Cover End Pressure [Max:1.375 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Top Quality D150 D155 Engine Alternator 600-821-8340 S6D155 Engine PartsCover End RPM [Max:75.0 LB; Max. RPM [Max:Flange Mount; Manufacturer Part No.:Right Hand (CW); Minor Diameter:3520V25A11-11CC22R; Mounting Flange:3; Controlled Flow Rate:Flange; Relief Valve Setting:N/A; Shaft Type:Standard Pilot; Model No.:1.375 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
6DS70 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD400GPort Orientation - Shaft End:75.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft End Flow @ RPM:3520V25A11-11CC22R; Cover End Flow @ RPM:3; Cover End RPM [Max:Flange; Shaft Key:N/A; Seal Material:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Top Quality GD305 Engine Alternator 600-821-7520 6D95 Engine PartsSeal Material:75.0 LB; Max. RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Manufacturer Part No.:3520V25A11-11CC22R; Relief Valve Setting:3; Cover End Flow @ RPM:Flange; Weight:N/A; Minor Diameter [Max:Standard Pilot; Mounting:1.375 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
SA6D102 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC220-6Model No.:75.0 LB; Seal Material:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Minor Diameter [Max:3520V25A11-11CC22R; Cover End RPM [Max:3; Shaft End Flow @ RPM:Flange; Rotation:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Spline Description:1.375 in; Minor Diameter:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Hydraulic Pump Parts A10VSO45 for RexrothPilot Type:75.0 LB; Mounting:Flange Mount; Integral Valve Configuration:Right Hand (CW); Model No.:3520V25A11-11CC22R; Cover End Pressure [Max:3; Port Orientation - Shaft End:Flange; Displacement Shaft End (cu in/revolution):N/A; Port Orientation - Cover End:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.375 in; Max. RPM [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator R906 water radiator for Liebherr excavator partsRotation:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Type:Right Hand (CW); Cover End Pressure [Max:3520V25A11-11CC22R; GPM @ 1,800 rpm, Cover End:3; Mounting:Flange; Shaft End Flow @ RPM:N/A; Minor Diameter [Min:Standard Pilot; Shaft Dia.:1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Hydraulic Main Pump For Hitachi Excavator ZX55 and Spare PartsPort Orientation - Shaft End:75.0 LB; Shaft End RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); Port Orientation - Cover End:3520V25A11-11CC22R; Major Diameter [Min:3; Model No.:Flange; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Displacement Cover End (cu in/revolution):1.375 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator R996B water radiator for Liebherr excavator partsShaft Type:75.0 LB; Port Orientation - Cover End:Flange Mount; Model No.:Right Hand (CW); Manufacturer Part No.:3520V25A11-11CC22R; GPM @ 1,800 rpm, Shaft End:3; Shaft End Pressure [Max:Flange; Cover End Flow @ RPM:N/A; Rotation:Standard Pilot; Spline Description:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3520V; Shaft Length:2.3125 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-11CC22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;

 

 

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed high quality excavator carrier roller DH150 for Daewoo excavator undercarriage parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us