• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6

  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6
  • 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6

category

excavator

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 Technical information

  • Standard Pilot
  • 0.875 in
  • Straight w/ Key
  • 2520V
  • 2.32 in
  • Double
  • Buna-N
  • 1800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • Motor
  • 2.8
  • Outlet Inline w/Inlet
  • 1 in Code 61
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 3/4 in Code 61
  • N/A
  • N/A
  • N/A
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520V-14A11-1CC22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 02-102509
  • 02-102533
  • 3000
  • 2500
  • 16.5
  • 21
  • 45° CW From Inlet Port

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 Products and services

 

Oil radiator EC700B water radiator for volvo excavator partsShaft Type:45.0 LB; Controlled Flow Rate:Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft Dia.:2520V-14A11-1CC22R; Mounting:2.5; Port Size:Flange; Port Orientation - Cover End:1/4 in; Integral Valve Configuration:22; Major Diameter [Min:Standard Pilot; Weight:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
high quality hydraulic arm cylinder for CAT 215B manufacturerPressure Port Size, Cover End:45.0 LB; Relief Valve Setting:Flange Mount; Model No.:Right Hand (CW); Shaft Dia.:2520V-14A11-1CC22R; Shaft End RPM [Max:2.5; Shaft End Flow @ RPM:Flange; Shaft Length:1/4 in; Spline Description:22; GPM @ 1,800 rpm, Cover End:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
D7DEAE2 Engine Cylinder Liner Kit Piston Piston Ring for Volvo Excavator EC290BLCPort Size:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Controlled Flow Rate:2520V-14A11-1CC22R; Port Type:2.5; Pressure Port Size, Shaft End:Flange; Displacement Cover End (cu in/revolution):1/4 in; Seal Material:22; Shaft Length:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
high quality excavator carrier upper roller EX280H-5 for Hitachi excavator undercarriage partsPort Type:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Shaft End Pressure [Max:2520V-14A11-1CC22R; Shaft Seal Type:2.5; Mounting:Flange; Pilot Type:1/4 in; GPM @ 1,800 rpm, Shaft End:22; Shaft Type:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
parker pump PV040 piston pump for parkerPort Orientation - Shaft End:45.0 LB; Shaft Type:Flange Mount; Cover End RPM [Max:Right Hand (CW); Mounting:2520V-14A11-1CC22R; Shaft End Flow @ RPM:2.5; Port Size:Flange; Integral Valve Configuration:1/4 in; Manufacturer Part No.:22; Minor Diameter [Min:Standard Pilot; Spline Description:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
high quality excavator upper roller DX300-9 for Daewoo excavator undercarriage partsMajor Diameter [Min:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Spline Description:Right Hand (CW); Mounting:2520V-14A11-1CC22R; Minor Diameter:2.5; Model No.:Flange; Controlled Flow Rate:1/4 in; Pressure Port Size, Shaft End:22; Mounting Flange:Standard Pilot; Shaft Dia.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
parker pump PV080 piston pump for parkerMax. RPM [Max:45.0 LB; Minor Diameter:Flange Mount; Rotation:Right Hand (CW); Major Diameter [Min:2520V-14A11-1CC22R; Port Orientation - Cover End:2.5; Pressure Port Size, Cover End:Flange; Displacement Shaft End (cu in/revolution):1/4 in; Controlled Flow Rate:22; Mounting Flange:Standard Pilot; Cover End Pressure [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
6D34 Engine Cylinder Liner Kit Piston Piston Ring for Kobelco Excavator SK200-5GPM @ 1,800 rpm, Cover End:45.0 LB; Shaft Length:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft End RPM [Max:2520V-14A11-1CC22R; Minor Diameter [Min:2.5; Relief Valve Setting:Flange; Pressure Port Size, Cover End:1/4 in; Cover End Flow @ RPM:22; Mounting Flange:Standard Pilot; Cover End Pressure [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
SAA6D125 Engine Oil Pump 6251-51-1001 for Komatsu Excavator PC400-8 PC450-8Port Orientation - Cover End:45.0 LB; Spline Description:Flange Mount; Shaft Length:Right Hand (CW); Minor Diameter:2520V-14A11-1CC22R; GPM @ 1,800 rpm, Cover End:2.5; Pressure Port Size, Cover End:Flange; Shaft Dia.:1/4 in; Mounting:22; Displacement Shaft End (cu in/revolution):Standard Pilot; Relief Valve Setting:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for CAT330DPort Size:45.0 LB; Mounting Flange:Flange Mount; Minor Diameter [Max:Right Hand (CW); Integral Valve Configuration:2520V-14A11-1CC22R; Cover End Flow @ RPM:2.5; Port Orientation - Cover End:Flange; Shaft Dia.:1/4 in; Shaft Key:22; Rotation:Standard Pilot; Pilot Type:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-14A11-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102509; Shaft End Cartridge Kit:02-102533; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:21; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.8;

 

 

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 6D102 6D107 Starter Motor Starting Motor 6738-82-6810 for Komatsu Loader WA380-6 WA250-6 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us