• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

category

Relief valve and other valve

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Systems

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1.75 in
  • Double
  • 2.8
  • 1800
  • 0.729 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520V14A8-11BB22R
  • 3000
  • 2500
  • 12
  • 21
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 1.7

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Dimensions

 

Genuine Quality Excavator Spare Parts 207-70-73250 Bushing for Komatsu PC360-7Manufacturer Part No.:45.0 LB; Minor Diameter [Min:Flange Mount; Shaft Type:Right Hand (CW); Weight:2520V14A8-11BB22R; Pump Series:2.5; Displacement Shaft End (cu in/revolution):Flange; Integral Valve Configuration:N/A; Cover End Flow @ RPM:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Seal Material:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Competitive factory price excavator hydraulic travel motor parts PC220-7 swing motor partsCover End Flow @ RPM:45.0 LB; Cover End RPM [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Major Diameter [Max:2520V14A8-11BB22R; Port Orientation - Shaft End:2.5; Model No.:Flange; Pressure Port Size, Cover End:N/A; Seal Material:Standard Pilot; Integral Valve Configuration:1.09 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Rexroth hydraulic parts A10VO45 pump parts A4VSO A10VSO A4VG A11VShaft End Flow @ RPM:45.0 LB; Mounting Flange:Flange Mount; Spline Description:Right Hand (CW); Shaft End RPM [Max:2520V14A8-11BB22R; Port Size:2.5; Model No.:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft Dia.:1.09 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
705-40-01000 PUMP for KOMATSU WA40-2Shaft End RPM [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Model No.:Right Hand (CW); Cover End RPM [Max:2520V14A8-11BB22R; Mounting Flange:2.5; Manufacturer Part No.:Flange; Relief Valve Setting:N/A; Spline Description:Standard Pilot; Port Size:1.09 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Hot sale For Kawasaki GM23 excavator swing motor partsPort Size:45.0 LB; Pump Series:Flange Mount; Shaft Dia.:Right Hand (CW); Shaft Type:2520V14A8-11BB22R; Relief Valve Setting:2.5; GPM @ 1,800 rpm, Cover End:Flange; Cover End RPM [Max:N/A; Controlled Flow Rate:Standard Pilot; Mounting Flange:1.09 in; Weight:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Hydraulic Pump Rexroth Piston Pump A8V115 Genuine QualityRelief Valve Setting:45.0 LB; Model No.:Flange Mount; Shaft Key:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520V14A8-11BB22R; Weight:2.5; GPM @ 1,800 rpm, Shaft End:Flange; Cover End Pressure [Max:N/A; Port Orientation - Shaft End:Standard Pilot; Pilot Type:1.09 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
OEM PC300-6 swing motor parts PISTON SHOE cylinder head BLOCK VALVE PLATE DRIVE SHAFTMinor Diameter [Max:45.0 LB; Rotation:Flange Mount; Shaft Key:Right Hand (CW); Pressure Port Size, Cover End:2520V14A8-11BB22R; GPM @ 1,800 rpm, Shaft End:2.5; Minor Diameter:Flange; Pilot Type:N/A; Port Type:Standard Pilot; Pump Series:1.09 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Factory price PC120-3-5-6 excavator GM18 final drives hydraulic swing travel motor with reduction boxShaft End RPM [Max:45.0 LB; Integral Valve Configuration:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Displacement Cover End (cu in/revolution):2520V14A8-11BB22R; Controlled Flow Rate:2.5; Weight:Flange; Shaft Type:N/A; Model No.:Standard Pilot; Major Diameter [Max:1.09 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Hydraulic Pump Rexroth Piston Pump A6V80 Hot saleSeal Material:45.0 LB; Manufacturer Part No.:Flange Mount; Model No.:Right Hand (CW); Relief Valve Setting:2520V14A8-11BB22R; Pump Series:2.5; Mounting:Flange; Shaft End Pressure [Max:N/A; Minor Diameter [Max:Standard Pilot; Controlled Flow Rate:1.09 in; Spline Description:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;
Excavator kyb travel motor kayaba TM07/09/18/40/60/70,GM06/09/10/18/21/35/38Pressure Port Size, Shaft End:45.0 LB; Port Type:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Type:2520V14A8-11BB22R; Seal Material:2.5; Mounting:Flange; Cover End RPM [Max:N/A; Pressure Port Size, Cover End:Standard Pilot; Rotation:1.09 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520V14A8-11BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.8;

 

 

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed OEM PC120-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us