• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

category

Relief valve and other valve

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Systems

  • 1.25 in
  • 14 Tooth Splined
  • 4535VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm
  • 4535VQ50A35-11AA20-LH
  • 3000
  • 2500
  • 52.5
  • 75
  • w/o Integral Valves
  • Outlet Opposite Inlet
  • Outlet Opposite Inlet
  • 1 1/4 in Flange
  • 1 1/2 in Flange
  • 6.88
  • 9.9

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Dimensions

 

705-56-34550 PUMP ASS Y for KOMATSU HM300-1Max. RPM [Max:118.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Orientation - Cover End:4535VQ50A35-11AA20-LH; Minor Diameter:4; Shaft Key:Flange; Shaft End RPM [Max:N/A; Cover End Pressure [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Shaft Seal Type:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
07448-66200 Work Pump for KOMATSU D355A-5Major Diameter [Max:118.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Type:Left Hand (CCW); Minor Diameter [Min:4535VQ50A35-11AA20-LH; Mounting:4; GPM @ 1,800 rpm, Shaft End:Flange; Port Orientation - Shaft End:N/A; Pressure Port Size, Cover End:Standard Pilot; Integral Valve Configuration:1.25 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
rexroth pump parts A4VG180Max. RPM [Max:118.0 LB; Mounting:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Rotation:4535VQ50A35-11AA20-LH; Shaft Length:4; Port Orientation - Cover End:Flange; Pump Series:N/A; Pressure Port Size, Shaft End:Standard Pilot; Port Orientation - Shaft End:1.25 in; Shaft Seal Type:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
705-11-21010 for KOMATSU LW160-1 PC10-1Pressure Port Size, Cover End:118.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Port Orientation - Cover End:4535VQ50A35-11AA20-LH; Model No.:4; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Key:N/A; Pump Series:Standard Pilot; Manufacturer Part No.:1.25 in; Port Type:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Genuine Quality Excavator Spare Parts 707-76-80010 Bushing for Komatsu PC270-7Relief Valve Setting:118.0 LB; Port Orientation - Cover End:Flange Mount; Seal Material:Left Hand (CCW); Max. RPM [Max:4535VQ50A35-11AA20-LH; Spline Description:4; Pressure Port Size, Shaft End:Flange; Cover End RPM [Max:N/A; Cover End Flow @ RPM:Standard Pilot; Shaft Length:1.25 in; Port Orientation - Shaft End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
07443-67503 Work Pump for KOMATSU D60A/E/P/PL-6/D65A/E/P/PLL-6Integral Valve Configuration:118.0 LB; Port Orientation - Cover End:Flange Mount; Model No.:Left Hand (CCW); Shaft Type:4535VQ50A35-11AA20-LH; Displacement Cover End (cu in/revolution):4; Shaft Seal Type:Flange; Weight:N/A; Pilot Type:Standard Pilot; Shaft Key:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hot sale For Toshiba SG12 excavator swing motor partsWeight:118.0 LB; Pump Series:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Port Orientation - Shaft End:4535VQ50A35-11AA20-LH; Major Diameter [Max:4; Port Orientation - Cover End:Flange; Controlled Flow Rate:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Spline Description:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Excavator gearbox partsCover End Pressure [Max:118.0 LB; Minor Diameter:Flange Mount; Shaft Length:Left Hand (CCW); Rotation:4535VQ50A35-11AA20-LH; Minor Diameter [Min:4; Shaft Seal Type:Flange; Pressure Port Size, Shaft End:N/A; Integral Valve Configuration:Standard Pilot; Pilot Type:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
705-41-08010 PUMP ASS Y for KOMATSU PC20/PC40-6Max. RPM [Max:118.0 LB; Seal Material:Flange Mount; Mounting Flange:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:4535VQ50A35-11AA20-LH; Pump Series:4; Pressure Port Size, Shaft End:Flange; Port Type:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Model No.:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
705-56-44001 P P C Lift dump steering p p c pump for KOMATSU WD600-1Port Type:118.0 LB; Controlled Flow Rate:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Max. RPM [Max:4535VQ50A35-11AA20-LH; Shaft Length:4; Shaft Key:Flange; Cover End Flow @ RPM:N/A; Minor Diameter [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;

 

 

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed OEM PC60-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us