• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts

  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts
  • Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts

category

Relief valve and other valve

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 2500
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2500
  • N/A
  • 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • V2010-1F11S6S-11CB12
  • 2200
  • 2500
  • 9
  • 16.5
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.19
  • 2.22

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts Dimensions

 

water pump for YANMAR 4TNE88Cover End Pressure [Max:30.0 LB; Port Type:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Integral Valve Configuration:V2010-1F11S6S-11CB12; Shaft End RPM [Max:1 1/2; Cover End Flow @ RPM:Flange; Displacement Cover End (cu in/revolution):N/A; Mounting Flange:N/A; Shaft End Flow @ RPM:0.875 in; Mounting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Kobelco SK330-6E SK200-6E K3V112DTP PUMP hydraulic main pumpShaft End Pressure [Max:30.0 LB; Rotation:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F11S6S-11CB12; Pilot Type:1 1/2; Shaft Length:Flange; Displacement Shaft End (cu in/revolution):N/A; Major Diameter [Max:N/A; Max. RPM [Max:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Genuine Quality Excavator Spare Parts 707-76-76170 Bushing for Komatsu PC270-7Relief Valve Setting:30.0 LB; Port Type:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Shaft Seal Type:V2010-1F11S6S-11CB12; Shaft End Flow @ RPM:1 1/2; Manufacturer Part No.:Flange; Weight:N/A; Controlled Flow Rate:N/A; Seal Material:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Hot sale For Kawasaki GM05VL excavator swing motor partsPilot Type:30.0 LB; Port Type:Flange Mount; Cover End RPM [Max:Right Hand (CW); Cover End Pressure [Max:V2010-1F11S6S-11CB12; Controlled Flow Rate:1 1/2; Relief Valve Setting:Flange; Major Diameter [Max:N/A; Pressure Port Size, Cover End:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
For Kato excavator gear reduction motor travel motor HD400 HD450 HD550 HD700 HD770 HD800 HD820 HD850 DH880 HD1020 HD1220 HD1430Port Size:30.0 LB; Rotation:Flange Mount; Mounting:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F11S6S-11CB12; Pilot Type:1 1/2; Max. RPM [Max:Flange; Pressure Port Size, Cover End:N/A; Shaft Dia.:N/A; Spline Description:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Genuine Quality Excavator Spare Parts 20Y-70-32331 Bushing for Komatsu PC220-7Max. RPM [Max:30.0 LB; Manufacturer Part No.:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Integral Valve Configuration:V2010-1F11S6S-11CB12; Seal Material:1 1/2; Shaft End Pressure [Max:Flange; Relief Valve Setting:N/A; Port Type:N/A; Port Orientation - Cover End:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Genuine Quality Excavator Spare Parts 208-70-72170 Bushing for Komatsu PC400-7Pump Series:30.0 LB; Shaft End RPM [Max:Flange Mount; Model No.:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F11S6S-11CB12; Shaft End Flow @ RPM:1 1/2; Shaft Type:Flange; Shaft Dia.:N/A; Seal Material:N/A; Relief Valve Setting:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
705-56-36040 Lift dump steering pump for KOMATSU WA250-6Shaft End RPM [Max:30.0 LB; Weight:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Cover End Pressure [Max:V2010-1F11S6S-11CB12; Shaft Type:1 1/2; Pressure Port Size, Shaft End:Flange; Displacement Cover End (cu in/revolution):N/A; Port Size:N/A; Relief Valve Setting:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Rexroth hydraulic parts A4VTG71 pump parts A4VSO A10VSO A4VG A11VCover End Pressure [Max:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Size:Right Hand (CW); Port Orientation - Cover End:V2010-1F11S6S-11CB12; Minor Diameter [Max:1 1/2; Pilot Type:Flange; Mounting Flange:N/A; Minor Diameter:N/A; Port Orientation - Shaft End:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Rexroth hydraulic parts A11VO210 pump parts A4VSO A10VSO A4VG A11VPilot Type:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Weight:V2010-1F11S6S-11CB12; Port Size:1 1/2; Controlled Flow Rate:Flange; Pressure Port Size, Cover End:N/A; Mounting Flange:N/A; Minor Diameter [Min:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;

 

 

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Various 6D95 engine cylinder head gasket 6206-11-1812 for PC200-5 excavator engine parts Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us