Home>Products>Hydraulic pump and pump parts>Hydraulic Gear Pump 175-13-23500
Hydraulic Gear Pump 175-13-23500
category
Hydraulic pump and pump parts
Hydraulic Gear Pump 175-13-23500 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Gear Pump 175-13-23500 Technical information
- 0.875 in
- 13 Tooth Splined
- 2520VQ
- 1 3/8 in
- Buna-N
- 2500
- 0.715 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 2700
- 2500
- 3 gal/min
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- N/A
- N/A
- 1500 psi
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- 2520VQP21A11-11DD3F-20
- 3000
- 3000
- 16.5
- 31.5
- Priority Valve & Relief
- Outlet 135° CW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in Flange
- 1 in Flange
- 2.22
- 4.12
Hydraulic Gear Pump 175-13-23500 Products and services
EP100T fuel injector for HITACHI EX300 | Cover End RPM [Max:45.0 LB; Max. RPM [Max:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Integral Valve Configuration:2520VQP21A11-11DD3F-20; Port Size:2 1/2; Shaft Dia.:Flange; Manufacturer Part No.:N/A; Shaft Type:Standard Pilot; Shaft End RPM [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Hydraulic Pump Spare Parts Press Pin 708-2H-23360 for Komatsu PC160-7 | Port Orientation - Cover End:45.0 LB; Model No.:Flange Mount; Shaft Dia.:Right Hand (CW); Shaft End Flow @ RPM:2520VQP21A11-11DD3F-20; Shaft Key:2 1/2; Mounting Flange:Flange; Weight:N/A; Cover End RPM [Max:Standard Pilot; Port Orientation - Shaft End:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Hydraulic Pump Spare Parts cam rocker 708-2G-04161 for Komatsu PC300-7 | Shaft Key:45.0 LB; Shaft End Pressure [Max:Flange Mount; Model No.:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQP21A11-11DD3F-20; Minor Diameter [Min:2 1/2; Displacement Cover End (cu in/revolution):Flange; GPM @ 1,800 rpm, Shaft End:N/A; Integral Valve Configuration:Standard Pilot; Max. RPM [Max:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Competitive price Carterppillar CART120 excavator pump parts VRD63 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT | Major Diameter [Max:45.0 LB; Shaft Length:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Port Type:2520VQP21A11-11DD3F-20; Pressure Port Size, Cover End:2 1/2; Displacement Shaft End (cu in/revolution):Flange; Pilot Type:N/A; Shaft Key:Standard Pilot; Shaft End Flow @ RPM:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Factory price T400 excavator alternator engine generator A2T32T9 | GPM @ 1,800 rpm, Cover End:45.0 LB; Model No.:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft End Flow @ RPM:2520VQP21A11-11DD3F-20; Pressure Port Size, Shaft End:2 1/2; Cover End Pressure [Max:Flange; Displacement Shaft End (cu in/revolution):N/A; Integral Valve Configuration:Standard Pilot; Spline Description:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Hydraulic Gear Pump 705-56-43010 | Minor Diameter [Max:45.0 LB; Pump Series:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Seal Material:2520VQP21A11-11DD3F-20; Displacement Cover End (cu in/revolution):2 1/2; Controlled Flow Rate:Flange; Shaft Key:N/A; Cover End Flow @ RPM:Standard Pilot; Relief Valve Setting:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Fixed displacement piston pump A2F12 piston motor A2F12L4P6 | Major Diameter [Max:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Type:Right Hand (CW); Pressure Port Size, Cover End:2520VQP21A11-11DD3F-20; Shaft Seal Type:2 1/2; Major Diameter [Min:Flange; Shaft Length:N/A; Port Orientation - Cover End:Standard Pilot; Minor Diameter:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Factory price 4BD1T SH120 excavator alternator engine generator 8-97022-211-2 0-33000-6542 | Max. RPM [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft End RPM [Max:2520VQP21A11-11DD3F-20; Minor Diameter [Min:2 1/2; Displacement Shaft End (cu in/revolution):Flange; Shaft Length:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Model No.:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Fixed displacement piston pump A2F45 piston motor | Seal Material:45.0 LB; Port Orientation - Shaft End:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Major Diameter [Min:2520VQP21A11-11DD3F-20; Minor Diameter [Min:2 1/2; Displacement Cover End (cu in/revolution):Flange; Weight:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Manufacturer Part No.:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
S6D170B fuel injector for KOMATSU PC1000-1 | Manufacturer Part No.:45.0 LB; Pump Series:Flange Mount; Spline Description:Right Hand (CW); Mounting Flange:2520VQP21A11-11DD3F-20; Displacement Shaft End (cu in/revolution):2 1/2; Model No.:Flange; Controlled Flow Rate:N/A; Pressure Port Size, Cover End:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11DD3F-20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
Hydraulic Gear Pump 175-13-23500 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Hydraulic Gear Pump 175-13-23500 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump